Amart Furniture COLTON 64569 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
COLTON MODULAR –ARMLESS CHAIR
ITEM CODE: 64569
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture Customer Service Free call 1800 351 084
64569 1-4
HARDWARE LIST:
Armless Chair

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level and spacious assembly area. Avoid hard surfaces that may
damage the product
2.Take care when lifting. Product should be assembled as close as possible to the
point of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly
5.Keep all hardware parts and packaging out of reach of small children
6.Do not over tighten the screws and bolts as this may damage the threads
64569 2-4

INSERT PAGE NUMBER 3
STEP 1:
Turn over onto blanket or carpet to ensure no damage to item.
I
nsert screw (B) into Legs (A) and attach to the predrilled holes. Using a screw
driver (C), turn clockwise until feet are tightened securely.
STEP
2:Assembly complete
64569 3-4
IMPORTANT: PLEASE ENSURE FEET ARE TIGHTENED SECURELY BEFORE USE!
WARNING –Do not drag lounge on any surface due to timber base, must be lifted.
Two person Lift Recommended

CARE AND MAINTENANCE
64569 4-4
Protect from direct sunlight, direct heat and weather.
All covers will fade over time.
Do not remove covers for cleaning.
Vacuum regularly using low suction.
Professional cleaning recommended.
Blot food and liquid spills immediately with a dry,
white, clean cloth. Do not rub.
If required for further cleaning, use
warm water and wipe with a damp cloth.
Dry in shade away from direct heat and sunlight.
Allow to dry thoroughly.
WARNING:
Apply only water-based soil resist (fabric protection) treatments.
Do not use aerosol products.
•PILLING IS NOT A FABRIC DEFECT OR FAULT AND IS NOT COVERED BY WARRANTY
•PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR AND TEAR AND DOES NOT
AFFECT THE DURABILITY OR FUNCTIONALITY OF THE FABRIC AND IS EASILY REMOVED