4
* Read carefully the attached documentation explaining
the assembly process. Failure to assemble the instrument
in the proper sequence might result in damage to the
instrument or even injury.
* When setting up the product, make sure that the AC
outlet you are using is easily accessible. If some trouble or
malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even
when the power switch is turned off, electricity is still
flowing to the product at the minimum level. When you
are not using the product for a long time, make sure to
unplug the power cord from the wall AC outlet.
* Use only the stand specified for the instrument. When
attaching the stand or rack,use the provided screws only.
Failure to do so could cause damage to the internal
components or result in the instrument falling over.
* Do not use the instrument/device or headphones for a
long period of time at a high or uncomfortable volume
level, since this can cause permanent hearing loss. If you
experience any hearing loss or ringing in the ears, consult
a physician.
Connections
* Before connecting the instrument to other electronic
components, turn off the power for all components.
Before turning the power on or off for all components, set
all volume levels to minimum.
* Be sure to set the volumes of all components at their
minimum levels and gradually raise the volume controls
while playing the instrument to set the desired listening
level.
Handling caution
* Do not insert a finger or hand in any gaps on the key
cover or instrument. Also take care that the key cover
does not pinch your finger.
* Never insert or drop paper, metallic, or other objects
into the gaps on the key cover,panel or keyboard. This
could cause physical injury to you or others, damage to
the instrument or other property, or operational failure.
* Do not rest your weight on, or place heavy objects on
the instrument, and do not use excessive force on the
buttons, switches or connectors.
Amason cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Using the bench (If included)
* Do not place the bench in an unstable position where it
might accidentally fall over.
* Do not play carelessly with or stand on the bench. Using
it as a tool or stepladder or for any other purpose might
result in accident or injury.
* Only one person should sit on the bench at a time, in
order to prevent the possibility of accident or injury.
* If the bench screws become loose due to extensive long-
term use, tighten them periodically using the included
tool.
* Keep special watch over any small children so that they
don’t fall off the rear of the bench.Since the bench does
not have a backrest, unsupervised use may result in
accident or in jury.
NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow
the notices below.
■ Handling and Maintenance
* Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices.
Otherwise, the instrument, TV, or radio may generate noise. When you use the instrument along with the application
on your iPhone/iPad, we recommend that you set “Airplane Mode” to “ON” on your iPhone/iPad in order to
avoid noise caused by communication.
* Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near
a heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components
or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)
* Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
* In the case of a model with a polished finish, bumping the surface of the instrument with metal, porcelain, or other
hard objects can cause the finish to crack or peel. Use caution.
* During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface
of the instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water
off immediately with a soft cloth.
Assembly
