Ambient Weather GL152-C2 User manual

Ambient Weather GL152-C2 Marine Quartz Clock, Roman
Numeral (Water Proof) User Manual
Table of Contents
1. Introduction.....................................................................................................................................2
2. Care and Cleaning...........................................................................................................................2
3. Battery and Installation...................................................................................................................2
4. Setting the Time..............................................................................................................................4
5. Waterproof and Corrosion Proof Specifications .............................................................................4
6. Warranty Information......................................................................................................................5
7. Liability Disclaimer ........................................................................................................................5
Version 1.0 ©Copyright 2011, Ambient LLC. All Rights Reserved. Page 1

1. Introduction
Thank you for your purchase of the Ambient Weather GL152-C2 Quartz Clock with Arabic numerals.
The following is a guide for preparation, care and operation of your marine weather instrument.
Note: Some of the images are generic and may not match your exact model.
2. Care and Cleaning
Avoid use of harsh household cleaners and coarse paper towels, which can scratch the bezel or lens.
Fingerprints and dirt may be removed the lenses and bezels with a soft cloth lightly dampened with a
mixture of water and mild dishwashing liquid. Be sure to dry the lens and bezel with a soft cloth
after cleaning.
3. Battery and Installation
1. Turn the blackplate counter clockwise (Figure 1) and remove the back to expose the battery
compartment, as shown in Figure 2. Install the AA battery into the battery compartment.
Figure 1 Figure 2
2. Fix the backplate to a wall or plaque (optional) with the four mounting screws (included) as
shown in Figure 3.
Version 1.0 ©Copyright 2011, Ambient LLC. All Rights Reserved. Page 2

Figure 3
3. Connect the instrument to the backplate and insert the lug on the backplate to align with the
gap on the instrument panel. The instrument will be aligned about 30 degrees
counterclockwise, as shown in Figure 4.
Figure 4
4. Turn the instrument panel clockwise until it no longer rotates, as shown in Figure 5. The
instrument panel will now be vertically aligned, as shown in Figure 6.
Version 1.0 ©Copyright 2011, Ambient LLC. All Rights Reserved. Page 3

Version 1.0 ©Copyright 2011, Ambient LLC. All Rights Reserved. Page 4
Figure 5 Figure 6
4. Setting the Time
To set the time, turn the adjustment wheel in the clockwise direction, as shown in Figure 7.
Figure 7
5. Waterproof and Corrosion Proof Specifications
This unit is waterproof with double seals on the front and back of the unit and can be submersed in
300mm of water for 3 months and includes a 5 year warranty against corrosion.
The manufacturing process includes double plating: Physical Vapor Deposition (PVD) Zirconium
plating over Chromium plating. Zirconium is a metal which has a high hardness and melting point. It
is corrosion resistant, and will never tarnish, discolor or scratch.
The surface of Zirconium Coating has the color of brass, with a mirror, hand polished finish. The
aluminous dial is suitable for various weather harsh conditions.

Version 1.0 ©Copyright 2011, Ambient LLC. All Rights Reserved. Page 5
High quality stainless steel mounting screws with PVD Zirconium plating are included. All fasteners
are made of stainless steel, suitable for salt water environments.
6. Warranty Information
Ambient, LLC provides a 5-year limited warranty on this product against manufacturing defects in
materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products purchased and
only to the original purchaser of this product. To receive warranty service, the purchaser must contact
Ambient, LLC for problem determination and service procedures.
Warranty service can only be performed by a Ambient, LLC. The original dated bill of sale must be
presented upon request as proof of purchase toAmbient, LLC.
Your Ambient, LLC warranty covers all defects in material and workmanship with the following
specified exceptions: (1) damage caused by accident, unreasonable use or neglect (lack of reasonable
and necessary maintenance); (2) damage resulting from failure to follow instructions contained in your
owner’s manual; (3) damage resulting from the performance of repairs or alterations by someone other
than an authorized Ambient, LLC authorized service center; (4) units used for other than home use (5)
applications and uses that this product was not intended, such as outdoor use.
This warranty covers only actual defects within the product itself, and does not cover the cost of
installation or removal from a fixed installation, normal set-up or adjustments, claims based on
misrepresentation by the seller or performance variations resulting from installation-related
circumstances.
7. Liability Disclaimer
Reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any
responsibility for any incorrect readings and any consequences that occur should an inaccurate reading
take place.
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written authorization of the manufacturer.
Ambient, LLC WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL,
PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR
MALFUNCTION OF THIS PRODUCT.