Ambient Weather GL152-BO User manual

Ambient Weather GL152-BO Barometer User Manual
Table of Contents
1. Introduction.....................................................................................................................................2
2. Care and Cleaning...........................................................................................................................2
3. Installation.......................................................................................................................................2
4. Barometer Operation.......................................................................................................................3
4.1 How the aneroid barometer works .........................................................................................3
4.2 Reading the barometer............................................................................................................4
4.3 Absolute vs. Relative Pressure...............................................................................................5
4.4 Barometer Calibration............................................................................................................5
5. Waterproof and Corrosion Proof Specifications .............................................................................5
6. Warranty Information......................................................................................................................5
7. Liability Disclaimer ........................................................................................................................6
Version 1.0 ©Copyright 2011, Ambient LLC. All Rights Reserved. Page 1

1. Introduction
Thank you for your purchase of the Ambient Weather GL152-BO Barometer. The following is a guide
for preparation, care and operation of your marine weather instrument.
Note: Some of the images are generic and may not match your exact model.
2. Care and Cleaning
Avoid use of harsh household cleaners and coarse paper towels, which can scratch the bezel or lens.
Fingerprints and dirt may be removed the lenses and bezels with a soft cloth lightly dampened with a
mixture of water and mild dishwashing liquid. Be sure to dry the lens and bezel with a soft cloth
after cleaning.
3. Installation
1. Turn the blackplate counter clockwise (Figure 1) and remove the back to expose the
backplate, as shown in Figure 2.
Figure 1 Figure 2
2. Fix the backplate to a wall or plaque (optional) with the four mounting screws (included) as
shown in Figure 2.
3. Connect the instrument to the backplate and insert the lug on the backplate to align with the
gap on the instrument panel. The instrument will be aligned about 30 degrees
counterclockwise, as shown in Figure 3.
Version 1.0 ©Copyright 2011, Ambient LLC. All Rights Reserved. Page 2

Version 1.0 ©Copyright 2011, Ambient LLC. All Rights Reserved. Page 3
Figure 3
4. Turn the instrument panel clockwise until it no longer rotates, as shown in Figure 4. The
instrument panel will now be vertically aligned, as shown in Figure 5.
Figure 4 Figure 5
4. Barometer Operation
4.1 How the aneroid barometer works
An aneroid barometer uses a small, flexible metal box called an aneroid cell. This aneroid capsule
(cell) is made from an alloy of beryllium and copper. The evacuated capsule (or usually more
capsules) is prevented from collapsing by a strong spring. Small changes in external air pressure cause

the cell to expand or contract. This expansion and contraction drives mechanical levers such that the
tiny movements of the capsule are amplified and displayed on the face of the aneroid barometer. Many
models include a manually set needle which is used to mark the current measurement so a change can
be seen. It was invented by Blaise Pascal.
4.2 Reading the barometer
Figure 6
It is highly advisable to lightly tap the glass near the center brass knob with your fingers before taking
a barometer reading. The light tap will overcome any friction that may affect accurate hand readings,
especially during periods of slow atmospheric changes. The Coast Guard has informed us that tapping
the barometer is even required on the most expensive aneroid barometers, because the mechanism is
made deliberately “stiff”.
The ability if the barometer to indicate changes in barometric pressure makes it a useful instrument in
weather forecasting.
The weather forecast or pressure tendency is based on the rate of change of barometric pressure. In
general, when the pressure increases, the weather improves (sunny to partly cloudy) and when the
pressure decreases, the weather degrades (cloudy to rain).
The weather forecast is an estimation or generalization of weather changes in the next 24 to 48 hours,
and varies from location to location. The tendency is simply a tool for projecting weather conditions
and is never to be relied upon as an accurate method to predict the weather.
The barometer includes a manually set needle, which is used to mark the current measurement so a
change can be seen. Barometric readings should be taken daily. Remember that the rate of change of
barometric pressure is important in determining weather changes. You may want to take multiple
readings each day during periods of unstable weather conditions.
The following basic rule of thumb will hold true in using the barometer to predict weather conditions.
•A fast rise in barometric pressure means goo weather of short duration.
•A rapid drop in barometric pressure means disturbances nearby, showers of short duration.
•Regular elevation in barometric pressure usually will indicate a clear, dry weather conditions
(cold and dry in the winter).
•A slow but continuous drop in barometric pressure will indicate persistent, bad weather.
•Slow drops of 2-3 tenths mbar per 24 hours a depression of some distance away.
•Drops of 1-2 tenths mbar per hour means disturbances nearby of short duration.
Version 1.0 ©Copyright 2011, Ambient LLC. All Rights Reserved. Page 4

Version 1.0 ©Copyright 2011, Ambient LLC. All Rights Reserved. Page 5
•Steep drops of 6-10 tenths mbar within 4-5 hours period indicates coming rain and/or storm
with strong winds.
4.3 Absolute vs. Relative Pressure
To compare pressure conditions from one location to another, meteorologists correct pressure to
sea-level conditions. Because the air pressure decreases as you rise in altitude, the sea-level corrected
pressure (the pressure your location would be at if located at sea-level) is generally higher than your
measured pressure.
Thus, your absolute pressure (measured at your location) may read 28.62 inHg (969 mb) at an altitude
of 1000 feet (305 m), but the relative pressure (sea-level) is 30.00 inHg (1016 mb).
The standard sea-level pressure is 29.92 in Hg (1013 mb). This is the average sea-level pressure
around the world. Relative pressure measurements greater than 29.92 inHg (1013 mb) are
considered high pressure and relative pressure measurements less than 29.92 inHg are considered low
pressure.
To determine the relative pressure for your location, locate an official reporting station near you (the
internet is the best source for real time barometer conditions, such as Weather.com or
Wunderground.com), and set your weather station to match the official reporting station.
4.4 Barometer Calibration
Your barometer will operate from -100 to 7,000 feet with reliable accuracy. Aneroid barometers have a
small screw on the back for sea-level calibration. With a flat blade screwdriver, turn this screw in
either direction slightly while looking at the indicator needle. It should move in one direction or the
other. Tap the barometer to see where the needle settles. Continue this procedure until the proper
pressure reading is obtained. Do not turn the screw counter-clockwise (to the left) too far, since the
screw can fall out. After the initial calibration, no further adjustment will be required unless the
barometer is moved to a new geographic location.
5. Waterproof and Corrosion Proof Specifications
This unit is waterproof with double seals on the front and back of the unit and can be submersed in
300mm of water for 3 months and includes a 5 year warranty against corrosion.
The manufacturing process includes double plating: Physical Vapor Deposition (PVD) Zirconium
plating over Chromium plating. Zirconium is a metal which has a high hardness and melting point. It
is corrosion resistant, and will never tarnish, discolor or scratch.
The surface of Zirconium Coating has the color of brass, with a mirror, hand polished finish. The
aluminous dial is suitable for various weather harsh conditions.
High quality stainless steel mounting screws with PVD Zirconium plating are included. All fasteners
are made of stainless steel, suitable for salt water environments.
6. Warranty Information
Ambient, LLC provides a 5-year limited warranty on this product against manufacturing defects in
materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products purchased and

Version 1.0 ©Copyright 2011, Ambient LLC. All Rights Reserved. Page 6
only to the original purchaser of this product. To receive warranty service, the purchaser must contact
Ambient, LLC for problem determination and service procedures.
Warranty service can only be performed by a Ambient, LLC. The original dated bill of sale must be
presented upon request as proof of purchase toAmbient, LLC.
Your Ambient, LLC warranty covers all defects in material and workmanship with the following
specified exceptions: (1) damage caused by accident, unreasonable use or neglect (lack of reasonable
and necessary maintenance); (2) damage resulting from failure to follow instructions contained in your
owner’s manual; (3) damage resulting from the performance of repairs or alterations by someone other
than an authorized Ambient, LLC authorized service center; (4) units used for other than home use (5)
applications and uses that this product was not intended, such as outdoor use.
This warranty covers only actual defects within the product itself, and does not cover the cost of
installation or removal from a fixed installation, normal set-up or adjustments, claims based on
misrepresentation by the seller or performance variations resulting from installation-related
circumstances.
7. Liability Disclaimer
Reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any
responsibility for any incorrect readings and any consequences that occur should an inaccurate reading
take place.
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written authorization of the manufacturer.
Ambient, LLC WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL,
PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR
MALFUNCTION OF THIS PRODUCT.