American Dynamics ControlCenter ADCC0200 User manual

7
0
ControlCenterTM ADCC0200 and ADCC0300
Keyboard Quick Reference Guide
1
Keyboard Settings
The default setting for the keyboard is RS485 mode at 19200 baud. To change these settings
enter the Special Config menu by pressing SHIFT ( ) and CLEAR ( ) keys within five
seconds of powering up the keyboard. Then press one of the following:
to change baud rate.
to change the mode (ADNet RS485 RS232).
to select Auto Repeat or Make/Break mode. See the matrix manual for correct setting.
to enable/disable the speaker.
Standard Matrix Operations
FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300
RS485 RS232 RS485 RS232
Select Monitor Monitor number ® üü ü ü
Select Camera Camera number ® üü ü ü
Select Matrix/Site Site number ® AND üü ü ü
Telemetry Enable/Disable üû ü û
Pan Left/Right oystick Left/Right üü ü ü
Tilt Up/Down oystick Up/Down üü ü ü
Zoom In (or Twist oystick Clockwise) üü ü ü
Zoom Out (or Twist oystick Anti-CW) üü ü ü
Focus Near üü ü ü
Focus Far üü ü ü
Iris Open üü ü ü
Iris Close üü ü ü
Flip üü ü ü
Engage Auto Iris AND , , or üü ü ü
Engage Auto Focus AND , , or üü ü ü
Select Preset Preset number ® üü ü ü
Record Preset ® Preset number ® üû ü ü
Manually Trigger Alarm ® Alarm number ® üû ü û
Acknowledge Alarm üü ü ü
Select Sequence Sequence number ® üü ü ü
Select View View number ® üû ü û
Select Salvo Salvo number ® AND ûü û ü

ADCC0200 and ADCC0300Quick Reference Guide
2
Standard Matrix Operations (continued)
Matrix Menu Operations
FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300
RS485 RS232 RS485 RS232
Run Tour Tour number ® üü ü ü
Hold Tour AND üü ü ü
Restart Current Tour üü ü ü
Last and Next Camera or üü ü ü
(When Tour Held)
F1 Function Function number ® ûü û ü
F2 Function Function number ® AND ûû û ü
FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300
RS485 RS232 RS485 RS232
Enter Menu Mode AND üû ü ü
Move Cursor Up oystick Up üû ü ü
Move Cursor Down oystick Down üû ü ü
Move Cursor Left oystick Left üû ü û
Move Cursor Right oystick Right üû ü ü
Page Up (if available) AND oystick Up üû ü ü
Page Down (if available) AND oystick Down üû ü ü
Page Left (if available) AND oystick Left üû ü ü
Page Right (if available) AND oystick Right üû ü ü
Menu Select ENTER key üû ü ü
Menu Escape RS232: AND -û-ü
RS485: ü-ü-

ADCC0200 and ADCC0300 Quick Reference Guide
3
Dome Operations
momentary momentary
FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300
RS485 RS232 RS485 RS232
Enter Dome Menu Mode ® AND üû ü ü
Exit Dome Menu Mode Via Dome Menu üû ü ü
Scroll Up Dome Menu oystick Up üû ü ü
Scroll Down Dome Menu oystick Down üû ü ü
Scroll Left in Dome Menu oystick Left üû ü ü
Scroll Right in Dome Menu oystick Right üû ü ü
Cycle Field Options/Values or (or Twist oystick) üû ü ü
Enter Selection or üû ü ü
Program Pattern ® Pattern number ® üû ü ü
AND ® Move joystick as
required ® Pattern number ®
Run Pattern Continuous Pattern number ® AND
Aux 1 On/Off üü ü ü
Aux 2 On/Off üü ü ü
Aux 3 On/Off üü ü ü
Aux 4 On/Off üAux 4 üüAux 4 ü
Lock/Unlock AND ûü û ü

ADCC0200 and ADCC0300Quick Reference Guide
4
VCR (PIP) DirectControl Mode (All Functions Available in DirectControl
Mode)
FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300
RS485 RS232 RS485 RS232
Select VCR Mode RS232: VCR number ® -ü-ü
RS485: ü-ü-
Play üü ü ü
Stop üü ü ü
Rewind üü ü ü
Fast Forward üü ü ü
Record üü ü ü
Pause üü ü ü
Reverse Play üû ü û
Search üû ü û
Menu üû ü û
Enter ENTER key üû ü û
Increment/Decrement or üû ü û
Record or Playback Speed
Up oystick Up üû ü û
Down oystick Down üû ü û
Left oystick Left üû ü û
Right oystick Right üû ü û
QuickSet Feature
FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300
RS485 RS232 RS485 RS232
Initiate QuickSet üü ü ü
American Dynamics
6795 Flanders Drive, an Diego, CA 92121
www.americandynamics.net
PN: MP200-300QRG-2