American Standard Town Square S T45550X User manual

- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please
read these instructions carefully before you begin.
RECOMMENDED TOOLS
M965904 (4/18)
ROUGHING-IN DIMENSIONS
TOWN SQUARE® S
PRESSURE BALANCING
BATH AND SHOWER
TRIM KIT
INSTALLATION
INSTRUCTIONS
T45550X
Plumbers’ Putty
or Caulking Adjustable Wrench Channel Locks
Phillips Screwdriver
Certied to comply with ANSI A112.18.1M
• To assure proper positioning in relation to wall.
Note roughing-in dimensions.
Teon Tape Flat Blade Screwdriver
1-5/8" TO 3-1/4"
(41 mm TO 83 mm)
BOTTOM OF
TUB
1/2" NPT
FINISHED WALL
1/2" COPPER
TOP OF
TUB RIM
7-3/8"
(188 mm)
1-3/4" MIN.
(44 mm)
1/2" NPT
7-1/8"
(181 mm)
9-1/8"
(232 mm)
3-1/2"
(90 mm)
6-3/4"
(72 mm)
2-1/2"
(64 mm)
2-5/8"
(66 mm)
7-3/8" (187 mm)
4" (102 mm)
74" FOR HEAD
CLEARANCE
(188 cm)
18" OPTIONAL
(457 mm)
2-7/8"
(72 mm)

- 2 -
H
C
OFF
1
2
Figure 1.
Figure 3.
2
PLASTER
GUARD
3
4
7
Figure 2.
6
2
5
5
8
UP
UP
UP
1
1
M965904 (4/18)
• Figure 1. Remove plaster guard from valve. Push CAP (1)
over VALVE CARTRIDGE (2) until seated against stop.
• Figure 2. Make sure O-RING (6) is secure within
ESCUTCHEON HOLDER (3). Push ESCUTCHEON
HOLDER (3) onto CAP (1) and attach with
LONG SCREWS (4).
• Figure 3. Install ESCUTCHEON (5) onto CAP (1) and
push ush against nished wall. Escutcheon (5)
will snap t onto ESCUTCHEON HOLDER (3).
INSTALL VALVE TRIM
2INSTALL, TUB SPOUT, SHOWER HEAD,
SHOWER ARM WITH FLANGE AND HANDLE
• Remove pipe cap and plug from shower and
tub rough piping.
• Install TUB SPOUT (1) onto tub nipple.
CAUTION: Protect finish on TUB SPOUT
when installing.
• Install SHOWER ESCUTCHEON (2) onto
SHOWER ARM (3). Apply sealant or Teon tape
to threads on both ends of SHOWER ARM (3)
and thread longer leg of SHOWER ARM (3) into
shower elbow.
• Thread SHOWER HEAD (4) onto SHOWER ARM (3).
CAUTION: Protect finish on SHOWER HEAD and
ARM when installing.
• Hold ADAPTER (9) onto CARTRIDGE STEM (6) and install
ADAPTER SCREW (10) through ADAPTER (9) into
CARTRIDGE STEM (6).Tighten ADAPTER SCREW (10) to
secure ADAPTER (9) to CARTRIDGE STEM (6).
• Install HANDLE (5) onto ADAPTER (9). Tighten
SET SCREW (7) with HEX WRENCH (8) supplied.
CAUTION Protect finish on SHOWER HEAD
and TUB SPOUT when installing.
PIPE
PLUG
SHR.
ELBOW
3
2
4
10
HEX
WRENCH
PIPE
CAP
7
8
5
HEX WRENCH
1-3/4" MIN.
TUB FILLER
NIPPLE
6
1
9
OFF
HOT
COLD

- 3 - M965904 (4/18)
TOWN SQUARE® S
PRESSURE BALANCE
BATH AND SHOWER
TRIM KIT
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 [phone]
Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST
Saturday 10:00 a.m. to 4:00 p.m. EST
IN CANADA 1-800-387-0369
(TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-1200
8888109-YYY
DIVERTER SPOUT (SLIP-ON)
M907053-YYY0A
ESCUTCHEON CAP
M970465-0070A
ESCUTCHEON HOLDER
M970467-YYY0A
HANDLE KIT
M970221-0070A
SET SCREW
M907891-YYY0A
ESCUTCHEON
078016-0020A
ESCUTCHEON SCREW
A919542-YYY0A
SHOWER ARM
M907633-YYY0A
SHOWER ARM FLANGE
1660515-YYY
SHOWER HEAD (1.8 GPM)
1660516-YYY
SHOWER HEAD (2.5 GPM)
A918477-0070A
HANDLE SCREW
M918039-0070A
HANDLE ADAPTER
COLD
HOT
OFF
MODEL NUMBER
T45550X
Replace the “YYY” with
appropriate finish code
POLISHED CHROME 002
BRUSHED NICKEL 295
LEGACY BRONZE 278
POLISH NICKEL 013