American Water Heater NRQSS00110 User manual

* For complete warranty information consult the written warranty of American Water Heaters found at www.americanwaterheater.com, or call [phone].
Copyright© by American® Water Heaters 2008. All rights reserved.
No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heaters.
Copyright© by American® Water Heaters 2010. All rights reserved.
FEATURES
Internal Heat Exchanger
• Single wall internal heat exchange coil for the most ecient heat transfer from
solar panels
• Suitable for propylene glycol heat transfer uid with corrosion inhibitor
Long-Lasting Low-Watt Density Copper Heating Element
• Low-watt density design spreads wattage over larger surface area to prolong element life
and help maximize energy-eciency
• Prewired for surface mount temperature sensor (sensor supplied separately)
2 Inch-Thick Environmentally Friendly Non-CFC Foam Insulation For
High Energy-Eciency
Glass Tank Coating
• Glass lining helps maximize tank life against corrosion and buildup
Diuser Dip Tube
• Helps reduce lime and sediment buildup to maximize hot water output
• Made from long-lasting PEX cross-linked polymer
Two Anode Rods
• Primary and secondary magnesium anodes with stainless steel core protect tank against
corrosion longer than ordinary anodes
Factory Installed CSA Certied and ASME Rated T&P Relief Valve
Durable Tamper-Resistant Brass Drain Valve
Pex-Lined, Heat Trap Nipples for Eciency
Codes and Standards
• Complies with current editions of: UL Standard for Household Electric Storage Tank Water
Heaters, UL 174; Packaged Solar Domestic Hot Water Systems (Liquid-to-Liquid Heat
Transfer) For All-Season Use, F379.1-09; Packaged Solar Domestic Hot Water Systems for
Seasonal Use, F379.2-09 and ICC Codes and HUD Standards
American 80 and 120-gallon indirect solar booster water heaters
are specially designed for installation as part of a closed loop
solar water heating system. They provide an energy-ecient
supplementary source of water heating power and hot water
storage to help maintain consistent water temperature during
periods when the solar components cannot keep up with system
demands. Count on American for products that provide hot water
solutions for residential renewable-energy applications.
Residential Electric Indirect
Solar Booster Water Heater
NRQSS00110
6-Year Limited Tank/ 6-Year Limited Parts Warranty*
SSX62-80H-045S and
SSX62-119H-045S
Qualies for
Federal Tax credit
of 30%
of the project cost.
NRQSS00110 Res Electric Solar Spec.indd 1 3/20/10 5:06 PM

Order Entry and Sales
500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030
P.O. Box 4808 (Mailing)
Johnson City, TN 37602-4808
[phone]
FAX [phone]
No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heaters.
Distributed By:
Warranty and Service
500 Princeton Road (FEDEX, UPS)
Johnson City, TN 37601-2030
P.O. Box 1597 (Mailing)
Johnson City, TN 37605-1597
[phone]
FAX [phone]
Indirect Solar Booster
Water Heater
NRQSS00110
All dimension in inches.
Recovery capacity based on element performance.
Working Pressure = 150 PSI
MODEL
NUMBER
GALLON
CAPACITY
ELEMENT
WATTAGE
(240 VOLT)
RECOVERY 90°
RISE GALLONS
PER HOUR
NUMBER OF
ELEMENTS
FOAM
THICKNESS
(INCHES)
DIMENSIONS IN INCHES APPROX.
SHIPPING
WEIGHT (LBS)HEIGHT DIAMETER A B
SSX62-80H-045S 76 4500 21 1 2 63-1/4 24 5-3/8 30-1/8 257
SSX62-119H-045S 108 4500 21 1 2 63-1/4 28 5-3/8 26-1/2 365
HEIGHT
1¼"
ANODE ANODE
1" NPT
OUTLET TO
COLLECTOR
DIAMETER
3
0
˚
3
0
˚
8"
A
¾" HOT DOMESTIC OUTLET ¾" COLD DOMESTIC INLET
T&P VALVE
1" NPT
INLET FROM
COLLECTOR
B
HEIGHT TO
T&P VALVE
55.15"
TOP T&P OPTION
Heat exchanger must only be used with a propylene glycol heat transfer
uid containing corrosion inhibitors such as Dowfrost™ HD
Working Pressure = 150 PSI
HEAT EXCHANGE COIL DATA
MODEL
NUMBER
TUBE I.D.
(INCHES)
TOTAL
SURFACE AREA
(SQUARE FT)
COIL
CAPACITY
(GALLONS)
TUBE
LENGTH
(FT)
SSX62-80H-045S 1.3 16 2.8 40.8
SSX62-119H-045S 1.55 18.8 4 41
PRESSURE DROP THROUGH COIL (FEET OF H20)
FLOW RATE (GPM)
HEAD LOSS (FEET)
SSX62-80H-045S SSX62-119H-045S
2 0.1 0.05
4 0.3 0.15
6 0.5 0.25
NRQSS00110 Res Electric Solar Spec.indd 2 3/20/10 5:06 PM