Ameriwood HOME 4942335COM User manual

4942335COM
6 Drawer Dresser
B344942335COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date of Purchase ___ / ___ / ___
Lot Number:
Assembly Difficulty Meter
Easy Tough
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 2 HOURS

3
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
Before You Start
Quick
Tip
Assembly
Please Note:
You may need to lightly tap the wood dowels to insert into the holes
during your assembly process.
wood dowel

5
Board Identification
Not actual size
Left Panel
34942335010
Right Panel
34942335020
Bottom
34942335050
Pattition
34942335030
Top
34942335040
Left Front Leg
34942335060
Left Upper Drawer Front
34942335100
Right Rear Leg
34942335090
C
EF
D
GH
I
J
AB
Right Front Leg
34942335070 Left Rear Leg 34942335080
Right Upper Drawer Front
34942335110 Left Lower Drawer Front (x2)
34942335120
Right Lower Drawer Front (x2)
34942335130
Drawer Side (x12)
39991167346200C
KL
M
DWR
BACK
DWR
SIDE
Drawer Back (x6)
39991167065490B Drawer Bottom (x6)
39991338066610D
DWR
BTM

6
Board Identification
Not actual size
Back Panel
K494200000
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.
NJ
K
L
M
DWR
SIDE
DWR
SIDE
DWR
SIDE
DWR
SIDE
DWR
SIDE
DWR
SIDE
DWR
SIDE
DWR
SIDE
DWR
BACK
DWR
BACK
DWR
BACK
DWR
BACK
DWR
BTM
DWR
BTM
DWR
BTM
DWR
BTM
A
B
C
E
F
G
H
I
D
N
x2
x2

7
Part List
Actual Size
(x10)
#A22620
cam lock
(x10)
#A22610
cam bolt
(x18)
#A21660
wood dowel
(x60)
#A11080
#6 x 7/16" screw
(x12)
#A22910
connector bolt
(x74)
#A12120
#8 x 7/16" screw
7
11
5
(x12)
#A22920
connector
(x23)
#A21110
nail
69
(x12)
#A17400
8-32 x 7/8" truss
(x24)
#A21970
drive fastener
(x2)
#A23030
confirmat screw
23
1
4
8
10

8
Part List
Not Actual Size
Left Cabinet Member
Right Cabinet Member
Left Drawer Member
Right Drawer Member
(x6)
#A56750
drawer slide pkg.
14a
14b
14c
14d
(x1)
#A84050
safety bracket kit
(x12)
#A54520
drawer bracket
(x6)
#A51715
handle
13
14
12
(x1)
#A43105
plastic foot
(x3)
#A43490
spacer glide
(x6)
#A54900
drawer brace
12a
12b
12c
12d
15 16
17
18

9
STEP1
6
6
(x12)
#A22910
F
G
H
I
6
6
6
6
6
6
6
6
6
6
6

10
STEP2
9
72
(x2)
#A22620 (x2)
#A22610 (x6) #A21660 (x6) #A22920
You will need to tap the connector (9)
with a hammer to fully insert. Be sure
the connector is positioned as shown
before tapping into hole.
7
9
9
2
Proper orientation of CAM LOCK
Tip
Assembly
Quick
1
1
A
2
7
7
7
9
9
9
9
7
7
1