Ameriwood HOME 9981900COM User manual

B349981900
COM00GO
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
WARNING
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Follow Ameriwood Home
Date of Purchase ___ / ___ / ___
Lot Number:
9981900COM
COFFEE BAR
Tube
You
Assembly Difficulty Meter
Easy Tough

Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
ameriwoodhome.com
2
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 0.5-1 HOUR
Contact Us!
Helpful Hints
Tube
You

P
Quick
Tip
Assembly
P
P
P
ameriwoodhome.com
3
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P
Before You Start
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You

Board Identification
Not actual size
ameriwoodhome.com
4
AC
HUTCH LEFT PANEL
T9981900020GO
QTY: 1 PC
HUTCH RIGHT PANEL
T9981900030GO
QTY: 1 PC
D
HUTCH TOP
T9981900010GO
QTY: 1 PC
TOP
T9981900040GO
QTY: 1 PC
E
LEFT PANEL
T9981900050GO
QTY: 1 PC
RIGHT PANEL
T9981900060GO
QTY: 1 PC
F
G
UPPER ADJ SHELF
T9981900070GO
QTY: 1 PC
UPPER DIVIDER
T9981900080GO
QTY: 1 PC
UPPER DOOR
T9981900090GO
QTY: 1 PC
I
B
Tube
You
H

Board Identification
Not actual size
ameriwoodhome.com
5
Tube
You
LOWER ADJ SHELF
T9981900100GO
QTY: 1 PC
J
BOTTOM
T9981900110GO
QTY: 1 PC
LOWER DOOR
T9981900130GO
QTY: 1 PC
K
KICK
T9981900120GO
QTY: 1 PC
L
M
UPPER BACK PANEL
T9981900140GO
QTY: 1 PC
LOWER BACK PANEL
T9981900150GO
QTY: 1 PC
N
O

Board Identification
Not actual size
ameriwoodhome.com
6
Tube
You
A
C
B
D
E
F
G
H
I
J
K
L
M
N
O

Part List
ameriwoodhome.com
7
Hardware Bag Reference number:
2
9981900
COM0GO
Actual Size
×18 ×16 ×4
CAM LOCK
TGO2101 WOOD DOWEL TGO2900 SCREW
TGO1008
Ø1.7 x 18mm
×44
NAIL
TG06517
Ø4.2 x 45mm
Ø8 x 30mmØ15 x 12mm
13
5
Tube
You
×18
Ø6 x 25mm
CAM BOLT
TGO2001
2
x1
Ø4.2 x 13mm
SCREW
TGO1304
×1
SCREW
TGO1314
78
Ø4.2 x 28mm
Not Actual Size
×1
9
WALL ANCHOR
TGO6501
Ø6 x 30mm ×1
10
WALL BRACKET
TGO3502
30x50x20mm ×12
11
COVER
TGO2219
Ø 20mm
4
Ø3.5 x 14mm
×24
6
SCREW
TGO1005
×8
SHELF SUPPORT
TGO2810
×2
13
KNOB
TGO5515
×4
15
DOOR HINGE
TGO4312
12
×2
14
BOLT
TGO1608
M4x19

ameriwoodhome.com
STEP
8
1
1.1 Insert (3) into (H), (L) and (K) as illustrated.
1.2 Attach (10) into (A) with (7) as illustrated.
1.3 Attach (2) into (A), (D) as illustrated.
Tube
You
3 ×8 ×17 ×110
10
7
A
H
K
L
3
×8
2
2
2
D

ameriwoodhome.com
STEP
9
2
2.1 Insert (3) into (B), (C), (E) and (F) as illustrated.
2.2 Attach (2) into (B), (C), (E) and (F) as illustrated.
Tube
You
×10
23 ×8
B
C
E
F
2
3
2

ameriwoodhome.com
STEP
10
3
3.1 Attach (H) into (B), (C) with (1) as illustrated.
3.2 Attach (A) into (B), (C) with (1) as illustrated.
Tube
You
FINISHED EDGE
B
B
C
C
H
H
A1
11
1 ×8 11 ×8 Proper orientation of CAM LOCK
Tip
Quick
Assembly
UNLOCK
LOCK
FINISHED EDGE
FINISHED EDGE
FINISHED EDGE

ameriwoodhome.com
STEP
11
4
4.1 Attach (D) into (B) and (C) with (4) as illustrated.
Tube
You
4
4 ×4
B
C
H
A
D
FINISHED EDGE
FINISHED EDGE FINISHED EDGE

ameriwoodhome.com
STEP
12
5
5.1 Insert (L) into (K) as illustrated.
5.2 Attach (L), (K) into (E), (F) with (1) as illustrated.
Tube
You
1 ×6Proper orientation of CAM LOCK
Tip
Quick
Assembly
UNLOCK
LOCK
L
K
K
L
E
F
1
FINISHED EDGE
FINISHED EDGE
FINISHED EDGE

ameriwoodhome.com
STEP
13
6
Tube
You
6.1 Attach (D) into (F), (E) with (1) as illustrated.
E
F
D
1 ×4 11 ×4
1
11
FINISHED EDGE
FINISHED EDGE

ameriwoodhome.com
STEP
14
7
Tube
You
7.1 Attach (N), (O) into (A), (B), (C), (E), (F) and (D) with (5) as illustrated.
F
C
A
N
O
5 ×44
5

ameriwoodhome.com
STEP
15
8
Tube
You
8.1 Insert (12) into (B), (C), (D) and (F) as illustrated.
8.2 Put (G) and (J) as illustrated.
8.3 Attach (15) into (I), (M) with (6) as illustrated.
G
J
12
12 ×815 ×46 ×8
I
M
15
6
B
E
C
F

ameriwoodhome.com
STEP
16
9
Tube
You
OR
6 ×16
13
14
13 ×2 14 ×2
6
B
E
C
F
C
F
E
B
9.1 Attach (13), into (I) and (M) with (14) as illustrated.
9.2 Attach (I) and (15) into (C) or (B) with (6) as illustrated.
9.3 Attach (M) and (15) into (E) or (F) with (6) as illustrated.
II
MM
15
Note: This is reversible door.

ameriwoodhome.com
STEP
17
10
Tube
You
A
A
B
C
Cabinet
Door
Cabinet
Door
Cabinet
Door
To adjust the vertical height.
Loosen the four screws "A" on bolt hinges. Two of them are usually in slotted
holes which allows you to adjust up of down by a few mm. then tighten back up.
Para ajustar la altura vertical
Afloje los cuatro tornillos "A" en ambas bisagras. Dos de esos están usualmente
en los agujeros llanos. Lo que significa que usted puede regular de arriba hacia
abajo. Por unos pocos milimetros. Luego apriete hacia arriba.
Pour régler la hauteur verticale.
Desserrez les quatre vis "A" sur les deux charnières. Deux d'entre elles sont
habituellement dans des fentes afin de vous permettre de les vis après
l'ajustement.
To adjust side ways.
Turning the screw "C" on BOTH hinges on each door.
Para ajustar los lados marcados
Gire los tornillos "C" de ambas bisagras en cada puerta
Pour régler latéralement.
Tournez la vis "C" sur les DEUX charnières de chaque porte.
To adjust the vertical height.
Loosen screw "B" and adjust door, if the door can not be adjusted, please
loosen screw "C", then try again. Tighten screw "B" and "C".
Para ajustar profundo.
Afloje los tornillos y ajuste la puerta, si la puerta no puede ser ajustada. Por
favor afloje los tornillos "C" y luego trate otra vez.
Apriete los tornillos "B" y "C"
Pour régler la profondeur.
Desserrez la vis "B" et ajustez la porte. Si la porte ne peut pas s'ajuster,
desserrez la vis "C", pui essayez de nouveau.
Serrez les vis "B" et "C".

ameriwoodhome.com
STEP
18
11
STUD Hole
Option 2
Option 1
WALLBOARD
For Masonry, Concrete, or other wall materials:
Consult your local hardware store for appropriate
anchors to securely attach the safety bracket
×1 ×1
WARNING
Serious or fatal crushing injuries
can occur from furniture tipover.
To prevent tipover:
* Install tipover restraint provided
* Place heaviest items in the lowest
drawers
* Unless specifically designed to
accomodate, do not set TVs or other
heavy objects on the top of this
product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
at a time
Use of tipover restarints may only
reduce, but not eliminate the risk of
tipover
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE
INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket (10) aligned in this
location. To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm) through the safety bracket (10)
into the stud. Drive the screw (8) through the safety bracket (10) into the wall stud. Tighten the screw (7) that was not fully
tighened in step 1.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket (10), then move your unit aside.
Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor (9) into the hole until it is flush. Move your unit into
location and fasten the wall bracket (10) to the wall anchor (9) with the screw (8).Tighten the screw (7) that was not fully
tightened in step 1.
10
9
9
7
Tube
You
8
8

Maximum Loads
Certificate of Conformity
1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual.
2. This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).
3. This product is distributed by: Dorel Home Furnishings, Inc.
410 East First Street South
Wright City, MO 63390
636-745-3351
4. Site of Manufacture: Binh Duong, Viet Nam.
5. See front page of instruction manual for date of manufacture.
This unit has been designed to support the maximum loads shown. Exceeding these load limits could
cause sagging, instability, product collapse, and/or serious injury.
ameriwoodhome.com
19
Tube
You
Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is
not approved for use with a television.
0 bl/ 0kg.
10 bl/ 5kg.
10 bl/ 5kg.
50 bl/ 25kg.
25 bl/ 11kg.
25 bl/ 11kg.

ameriwoodhome.com
20
Register your product to receive the following:
* New trend details - sneak peek on what's new
* Surveys - have a voice within our community
* Exclusive deals and discount codes
* Quick and easy replacement part service
To register your product, visit ameriwoodhome.com
Visit your local retailer's website, rate your purchased
product and leave us some feedback!
We would like to extend a big "Thank You" to all of
our customers for taking the time to assemble this
Ameriwood Home product, and to give us your
valuable feedback.
Tube
You