Ameriwood HOME 1509348COM User manual

1509348COM
3 Drawer Dresser
B341509348COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date of Purchase ___ / ___ / ___
Lot Number:
Assembly Difficulty Meter
Easy Tough
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com

Contact Us!
Helpful Hints
2
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2

3
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
P
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Parts are labeled on the surface or edge of the part
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight. Failure
to do so may result in stripping the screw.
Press parts together so CAM BOLT inserts
into edge hole.
Using a screwdriver, turn the CAM LOCK clockwise to
lock the CAM LOCK and CAM BOLT into their holes and
fastening parts together.
Press CAM BOLT into hole. Press CAM LOCK into hole.
Arrow to point towards end
hole in edge of part.
End hole

4
Before You Start
Quick
Tip
Assembly
Please Note:
You may need to lightly tap the wood dowels to insert into the holes
during your assembly process.
wood dowel

5
Board Identification
Not actual size
Left Panel
31509348010 Right Panel
31509348020
Bottom
31509348040
Top
31509348030
Left Front Leg
31509348070
Upper Drawer Front
31509348110
Right Rear Leg
31509348100
C
EF
D
GH
I
J
Right Front Leg
31509348080
Left Rear Leg
31509348090
K
Support
31509000050 Back (x2)
31509348060
Drawer Front
31509348120
AB
L
Left Drawer Side
39991120346410L Right Drawer Side
39991120346410R
LFT
DRW
SIDE
RGT
DRW
SIDE
Right Drawer Side (x2)
39991167346410R
Left Drawer Side (x2)
39991167346410L
RGT
DRW
SIDE
LFT
DRW
SIDE

6
Board Identification
Not actual size
DWR
BACK
DWR
BTM
A
B
C
E
F
G
I
x2
DWR
BTM
DWR
BACK
D
F
H
J
KL
DWR
BACK
DWR
BACK
DWR
BTM
Drawer Back
3999112066618B
Drawer Back (x2)
3999116766618B
Drawer Bottom (x3)
3999134067710D
LFT
DRW
SIDE
RGT
DRW
SIDE
LFT
DRW
SIDE
RGT
DRW
SIDE

7
Part List
Actual Size
(x12)
#A22700
cam lock
1
(x12)
#A22710
cam bolt
(x30)
#A11080
#6 x 7/16" screw
(x16)
#A21670
wood dowel
(x12)
#A22910
connector bolt
(x30)
#A12120
#8 x 7/16" screw
8
5
(x12)
#A22920
connector
6
(x6)
#A17400
8-32 x 7/8" truss
(x12)
#A21975
drive fastener
(x1)
#A84050
safety bracket kit
(not to size)
3
9
2
(x4)
#A23030
confirmat screw
(x4)
#A54520
drawer bracket
12d
12a
12b
12c
(x2)
#A54510
drawer bracket
10
11
12
13
7
4

8
Part List
Not Actual Size
Left Cabinet Member
Right Cabinet Member
Left Drawer Member
Right Drawer Member
(x3)
#A56770
drawer slide pkg.
(x3)
#A51715
handle
(x3)
#A54900
drawer brace
14
15
14a
14b
14c
14d
16

9
STEP1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
2
1
3
x2 x4 x2 x6
2
1
1
2
2
2
3
3
7
7
7
7
7
7
7
You will need to tap the
connector (7) with a
hammer to fully insert.
Be sure the connector is
positioned as shown
before tapping into hole.
A

10
STEP2
7
23
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
x2 x4 x2 x6
7
2
7
13
You will need to tap the
connector (7) with a
hammer to fully insert.
Be sure the connector is
positioned as shown
before tapping into hole.
1
3
2
2
2
7
7
7
7
B