AMIRIDIS-SAVVIDIS UNITED HD-9132 Installation guide
Styling
Towel dry hair before using the hair dryer, Set the dryer on
highest setting and speed and circulate airflow through
hair, but do not concentrate airflow on any one area for a
long period of time. As soon as hair is almost completely
dry, lower the speed and setting and use a styling brush to
shape hair.
Heat and Speed Control Button
High temperatures and speed settings are ideal for fast
drying or pre-drying; low temperatures and speed settings
are ideal for styling.
Airflow Concentrator Nozzle
Before drying thick hair with this attachment, use the
dryer on the high setting to remove excess moisture. The
airflow concentrator nozzle attachment channels airflow
for smooth, manageable drying. Do not concentrate the
airflow on any one area for an extended period of time. If
you desire to dry your hair quickly, remove the attachment
and set the dryer at the highest heat and speed setting.
Cleaning the Hair Dryer andAir Intake Cap
Wipe the outlet surface of the hair dryer with a slightly
moist cloth, then wipe dry. This dryer is a
precision-designed professional tool. It must breathe to
operate at peak efficiency. To ensure this, be sure the air
intake cap is always free from lint, hair, and other matter.
Ensure the unit is not operating or connected to the mains
supply. To clean, remove the air intake cap, then clean the
air intake cap with a vacuum or brush. This should be
done regularly.
Cool Shot Button
Once the desired style is achieved, push the Cool Shot
button to set the style with a flow of cool air.
Hang-up Loop
This hair dryer features a loop allowing it to be
conveniently hung on a hook for easy access.
NOTICE ABOUT RECYCLING
Your product is designed and
manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and
electronic equipment, at their end-of-life, should
be disposed of separately from your household
waste. Please dispose of this equipment at your local
community waste collection/ recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products. Please
help us to conserve the environment we live in!
DECLARATION OF CONFORMITY
This product complies with the requirements of the directives
EMC-Directive:2004 / 108 / EC
Low Voltage Directive: 2006 / 95 / EC
EcoDesign EuP Directive: 2009/125/EC
declare that the HD-9132
is in compliance with the following norms:
EN 55014-1:2006
EN 55014-2:1997+A1:2001
EN 61000-3-2:2006
EN 61000-3-3:1995+A1 :2001+A2 :2005
EN 60335-2-23 :2003
EN 60335-1 :2002+A11,A1 :2004+A12,A2 :2006
EN 62233 :2008
EN 50366 :2003+A1 :2006
EN 62301:2005
IMPORTED BY
Amiridis – Savvidis S.A.
33, Vas. Olgas Street – P.O. 54641 – Thessaloniki
Tel: +30 2310-850107, 2310-850108, Fax: +30 2310-867835
45 Posidonos St. – O.P. 18344 - Moschato
Tel: +30 210 9402064, Fax: +30 210 9402137
www.amiridis-savvidis.gr
®
By AMIRIDIS – SAVVIDIS S.A.
Ionic Hair Dryer
HD-9132
Use and care instruction manual
200-240V 50Hz 2200W
Operating Instructions
This appliance is intended for household use only
Appliance Features:
A —Air-outlet
B —Air intake cap and removable air filter
C —Cool shot button
D —Heat & speed control buttons
E —Accesories
F —Hang-up loop
SAVE THIS INSTRUCTIONS
Read all instructions before using
Important Safety Instructions
WARNING: Do not use this appliance near water
contained in bath-tubs, basins or other vessels. This
appliance is not intended for use by young children or
infirm persons without supervision. Young children should
be supervised to ensure that they do not play with the
appliance.
WARNING: This appliance must not be taken into the
bathroom. For additional protection, the installation of a
residual current device (RCD) with a rated residual
operating current not exceeding 30mA is advisable in the
electrical circuit. Ask your installer for advice.
Keep this appliance away from water. Plug your hair
dryer into an alternating current (~) outlet only. Be sure
that household voltage corresponds to voltage marked on
the hair dryer. Neither should the appliance be used with
wet hands nor immersed in water, held in running water,
or allowed to become wet (e.g., as in splashing). Always
unplug appliance when not in use. Do not place heated
appliance on any heat-sensitive surface when hot or when
plugged in. When using the appliance, care must be taken
to prevent hair ingress into the air inlet openings.
Note: Use on towel dried hair only.
Overheating Cutoff
This appliance is equipped with a thermostat that will
cycle OFF(O)if the temperature exceeds the comfort level
due to partially blocked air inlet or outlet openings. In the
event that the appliance only produces cool air, turn the
appliance OFF(O)and allow it to cool down. Once the
appliance cools, the thermostat will automatically reset
and usage may resume. During use, do not block the air
openings. Periodic cleaning of the rear intake cap is
required to maintain proper performance. While using this
hair dryer, it will get hot at the air outlet. Avoid touching
the air outlet or any accessories attached to the outlet.
Storage
When not in use “unplug it.”
Never touch the pins of the plug as some electricity
may still exist in the product’s circuit, even if it is
unpluged.
Allow the appliance to cool and store in a dry location.
Never wrap the cable around the appliance. Since this will
cause the cable to wear prematurely and break. If the
supply cable of this appliance becomes damaged. It must
be replaced by returning to the retailer from which the
product was purchased or a similarly qualified person in
order to avoid a hazard. Regularly check the main cable
for wear and damage, particularly where it enters the
appliance and the plug.
This product carries the CE mark and is manufactured in
conformity with the Electromagnetic Directive
89/336/EEC and the Low Voltage Directive 73/23/EEC.
New Ionic Technology
This new anti-static ionic hair appliance dries your hair
faster. Negative ions reduce the size of water droplets on
the air, allowing more water to be absorbed. This helps
condition, soften and make the hair shinier. The ionic
function automatically operates when the unit is switched
‘On’.
Ionic Technology-how it works.
1. Negative ions cause large water droplets on the hair to
be broken up in to smaller drops.
2. When droplets are smaller, more water is absorbed
into the hair; hence the hair is dried quicker.
3. This also adds more moisture to the hair follicle,
which has a conditioning and smoothing effect.
4. More light is reflected off a smooth surface, which
will therefore make the hair look shinier.
