35-Key Numeric Keypad
Accessories
Turn Device ON/OFF & Suspend
ACC-5910 In-Line Charger Built-In Programs
4-Position Computer
or Terminal Charger
ACC-5925
Terminal Charger
4-Position Battery
Charging Cradle
Warranty Agreements
SVC-EW5900
SVC-EWP5900
SVC-EW5901
SVC-EWP5901
Extended Warranty, 3 year, M5900
Extended Warranty PLUS, 3 year, M5900
Extended Warranty, 3 year, M5901
Extended Warranty PLUS, 3 year, M5901
© 2013 American Microsystems, Ltd. All rights reserved.
American Microsystems, Ltd. reserves the right to make
changes in specifications and other information contained
in this document without prior notice, and the reader
should in all cases consult American Microsystems, Ltd. to
determine whether any such changes have been made.
The information in this publication does not represent a
commitment on the part of American Microsystems, Ltd.
American Microsystems, Ltd. shall not be liable for technical
or editorial errors or omissions contained herein; nor for
incidental or consequential damages resulting from the
furnishing, performance, or use of this material. This
document contains proprietary information which is
protected by copyright. All rights are reserved. No part
of this document may be photocopied, reproduced, or
translated into another language without the prior written
consent of American Microsystems, Ltd.
2190 Regal Parkway
Euless, TX 76040
800.648.4452
www.amltd.com
www.barcodepower.com
1. Power ON/OFF Key
2. Scan Key
3. Backlight Key
4. Arrow Keys
5. Lock/Green Modifier Key
6. Enter Key
7. Menu Key
8. Backspace Key
9. Alpha Modifier Key
10. Unlock/Purple Modifier Key
6
1
7
3
4
2
10 5
9
8
Safety NOM/NYCE-NOM-019-SCFI-1998
Safety of data processing equipment
In order to suspend the terminal, simply press the on/off
button once. If you wish to store the unit for long periods of
time while not in the charger, you can completely shut
down the unit by pressing both the on/off button and the
scan key simultaneously. Hold both keys for more than five
(5) seconds while the unit powers off. The LED light will flash
rapidly when the unit is powering down.
On/Off button
Scan key
There are six (6) built-in programs that can be used on the
M5900 terminal right out of the box. You can also create
your own unique program(s) using either the On-Board
Programmer or the M5900 Program Generator software.
Please refer to the M5900 User's Guide to learn more about
creating programs.
Built-In Programs
P1 Captures Item Number
P2 Captures Item Number, Quantity
P3 Captures Item Number, Quantity, Location
P4 Captures Item Number, Quantity, From Location, To Location
P5 Captures Order Number, Item Number, Quantity
P6 Captures P.O. Number, Item Number, Quantity
NOTE: The M5900 terminal will automatically turn on
when connected to the in-line charger or placed in the
charging cradle.
A fully discharged
battery takes about
4 hours to recharge
before initial use and
6 hours to fully recharge.
