AMobile IB004 User manual
IB004
Thermal Camera
User manual
2
Draft Version 0.1
Copyright Notice
© Amobile Intelligent Corp. All Rights Reserved.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct,
indirect, special, incidental, or consequential damages arising from the use
or inability to use the product or documentation, even if advised of the
possibility of such damages.
3
FEDERALCOMMUNICATIONSCOMMISSIONINTERFERENCESTATEMENT
This equipment has been tested and found to comply with the limits for a
ClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsare
designedtoprovidereasonableprotectionagainstharmfulinterferenceina
residentialinstallation.Thisequipmentgenerates,usesandcanradiateradio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However,thereisnoguaranteethatinterferencewillnotoccurinaparticular
installation. If this equipment does cause harmful interference to radio or
televisionreception,whichcanbedeterminedbyturningtheequipmentoff
andon,theuserisencouragedtotrytocorrecttheinterference by one or
moreofthefollowingmeasures:
‐Reorientorrelocatethereceivingantenna.
‐Increasetheseparationbetweentheequipmentandreceiver.
‐Connect the equipment into an outlet on a circuit different from that to
whichthereceiverisconnected.
‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
CAUTION:
Anychangesormodificationsnotexpresslyapprovedbythegranteeofthis
devicecouldvoidtheuser'sauthoritytooperatetheequipment.
RFexposurewarning
Thisequipmentmustbeinstalledandoperatedinaccordancewithprovided
instructionsandtheantenna(s)usedforthistransmittermustbeinstalledto
provideaseparationdistanceofatleast20cmfromallpersonsandmustnot
beco‐locatedoroperatinginconjunctionwithanyotherantennaor
transmitter.End‐usersandinstallersmustbeprovidewithantenna
installationinstructionsandtransmitteroperatingconditionsforsatisfyingRF
exposurecompliance.
4
ManufacturersofU‐NIIdevicesareresponsibleforensuringfrequency
stabilitysuchthatanemissionismaintainedwithinthebandofoperation
underallconditionsofnormaloperation.
Content
1.Thermalcamera(IB004)
2.5V/2AAdapter
introduction of System
5
The Part function
1 LED indicator
Solid red: disconnect
Blink blue: connecting
Blink green: connected
2 8μm ~14 μm IR Camera
3 Power button
A
uto power on when power connected
4 Release the button to adjust the angle of camera.
5 3-pin M8 power jack
6 Wall hole(M5)
in
t
r
oduct
i
o
n
o
f IB
00
4
21
5
6
4
3
6
To use the M5 screw x 4 to secure the
Camera
How to fix the Camera
7
To connect the camera and power on
1. Hole the M8 connector of
in-box adapter then pin to
pin to insert the power
jack if IB004
2. To secure the connector
then insert the adapter to
AC socket。
3. IB004 AUTO power on
after step 2 and share the
Wi-Fi hotspot, LED show
the blink blue when no
device connected,
LED show blink green
when device connected
Connecting and power on
8
The M8 jack of IB004
Pin color definition
1 Blue N.C
2 Red +
3 black -
The definition of M8 Jack
Table of contents
