AMP Display Inc. DWIN C Series LCM User manual

inf
1
Contact Us
AMP DISPLAY INC.
QUICK START GUIDE
for DWIN C Series LCM
Thank you for choosing the DWIN UART LCD
Module. This quick start guide will show you how to
simply make a connection between a computer (PC) and
DWIN C series UART module. You can also refer to
our Development Guide and Software User Guide for
further details.
What is DGUS?
DGUS, which stands for: DWIN
Graphical User Software, is intelligent
GUI design software applicable to a
wide range of applications from factory
automation to diagnostics and therapy,
process control and point-of-sale
systems. DGUS offers Original
Equipment Manufacturers (OEM)
design engineers that ability to develop
product prototypes using color TFT
LCD panels, greater flexibility, faster
development and easier upgrading
capability without the complexity of
TFT timing signals or core algorithms.
Please note: this quick guide is only for the C series models. If you have a T series
model or an S series model, (For example T series: DMT80480T07_06WT, S series:
DMT80480S070_06WT) this quick start might not be suitable for you. Please contact
AMP Display if you have an S or T series and need help setting up your display.
Required Items
In order to successfully make a connection between a
computer and DWIN C series module, you will need the
following items:
1. Male to male USB cable
Because of the 5V power-up requirement of the C series module,
the display can connect directly to a PC via a USB cable.
2. 10 pin flat cable
3. HDL662 (FCC to USB connecting board)
4. Molex 10 pin connector
available for your MCU connection
5. 2GB DWIN SD Card
6. Optional: HDL661 or HDL663

Adad
Contact Us
AMP Display Inc.
9856 Sixth Street, Rancho Cucamonga, CA 91730
Tel: [phone] Fax: [phone] | Email: [e-mail]
www.ampdisplay.com
2
AMP Display Inc.
Instructions
Step 1
Make sure that the SD card is formatted to FAT32, and
the images are formatted to 24 bit BMP with numbering
sequence from zero (for example: 00.bmp, 01.bmp,
02.bmp, etc.)
Note: Only kernel drivers that are K600+ can support DGUS. Please refer to
DGUS Development Guide_V3.1.0 for more information regarding DGUS
working principles. You can also obtain a copy of the DGUS software on the
AMP Display website under the Download Center here (Please refer to the
DGUS User Guide_V3.4.0 to guide you how to use DGUS software)
Customers who are using Terminal Assistant V6.0, we have Quick Guide
V1.0.0 to show you how to connect and some of the basic operations of
DGUS with picture illustrations
Step 2
First connect the LCD module with HDL662 using
10pin flat cable, then connect HDL662 to PC with USB
cable.
Assuming that your PC is turned on, your display module should light
up and automatically begin the DWIN demo slide show, in order to
reference how easy it is to use this product. For more information
about this demo slide show, please contact AMP sales
representatives.
We strongly recommend DWIN SD
cards to use along with DWIN LCM’s,
because DWIN SD cards are
specifically used for industrial
applications and is equipped with SLC
that allows you to read-and-write
10000 times as opposed to ordinary SD
cards that only allow you to read-and-
write 2000 times. Please note that the
LCM’s specification sheet should
indicate the SD card you will need:
Standard SD card or TF card with
adaptor sleeve. Please call or email your
AMP representative should you have
any questions.
Why choose DWIN
SD Cards?
How it Works: Communication
between controller and DWIN DGUS
There are only five simple commands used during DGUS
operation for storage purposes with space from 0000H-
6FFFH. User can write or read the data into *VP for data
variable adjustment without directly controlling the
display, while the display module will automatically
recognize the corresponding variables that user want to
display, based on the SP settings. For detailed commands,
please refer to the Development Guide.
。
For example: Register Access Command 0x80
Use this to switch to the fifth image: AA 5A 04 80 03 00
05.
AA 5A: User Defined Frame Header
04: Data length (four bytes sent from 0x80 in eg)
80: Command for accessing control register
03: Register Address(*VP) 00 05: Image ID. 2
SP: Stack Pointer is a storage address for file
descriptions where you can adjust such properties
like character color, size, pixels etc. Description
files can be downloaded from Flash drive and
stored in SP.
VP: Variable Pointer is an address of variables for
data which will be displayed or input.
Contact Us

Adad
Contact Us
AMP Display Inc.
9856 Sixth Street, Rancho Cucamonga, CA 91730
Tel: [phone] Fax: [phone] | Email: [e-mail]
www.ampdisplay.com
3
AMP Display Inc.
(Continued)
Step 3
Once you connected the USB to a PC, the PC will
alert you to install a USB driver. Please go to
http://ampdisplay.com/support.php
to download
XR21v1410 and start manual installation. Open
Computer>Properties>Device Manager>Port, then
right click to install and update the driver software
option by browsing the folder of XR21v1410.
Though SD cards are capable of configuring the system file,
some customers still need direct data communications for
detecting commands that transferred between MCU and display,
such as data availability of serial port, data checking by
SSCOM32 etc. In order for data communication to take place,
you have to install the driver XR21v1410 to operate HDL662. If
you have the HDL663, you will need both CP2102 and
XR21v1410 drivers.
Step 4
Step 4: The yellow sign in Device Manager will
disappear and a dialog box will show up to notify
you that you’ve successfully completed the
installation.
Tips: Do not save the XR21v1410 folder to your desktop
because there will not be an actual path for the OS to track. Also,
make sure that you have installed the driver based on your OS
type (x64 bit or x86bit)
AMP Display Inc. offers the
newest DWIN technology,
the one stop solution
(software and hardware
package) to your LCD
module needs. Please click
here for more information about
DWIN and the latest product
offerings.
If you have a problem, we got
the solution. With over 10
years of experience, AMP
Display’s team of engineers and
sales representatives are ready
to assist and provide you a
solution. Please call or email us
at any time. An AMP Display
representative will be able to
assist within 24 hours.