User and Installation Guide
R
Step 1 Connecting the transmitter
The transmitter connects either to a standard line-out audio interface via the
supplied RCA cable or to an amplified speaker output via the supplied short
speaker cables.
The transmitter can also be connected to other audio outputs by using an
appropriate adapter.
from power surges.
If the transmitter is connected via speaker cables, observe the polarity of the
cable connection to ensure that the transmitter will be fed with a correct
polarity signal. If one of the cables is switched (reversed), one speaker will
receive an opposite polarity signal which will degrade sound performance.
Connect the supplied small AC adapter’s barrel-shaped plug into the DC 9V
jack, and then plug the transformer into a standard AC outlet. We recommend
the use of a surge protector to protect the transmitter
Unpacking: Check that this package contains:
One 5.8 GHz Digital Audio transmitter, one 5.8 GHz Digital Audio receiver,
two AC adapters, two dual RCA audio cables.
ATTENTION!
Do not use both the speaker cables and RCA cable. Do not
connect speakers to the transmitter.
Page 2
Limited warranty
WHAT YOUR WARRANTY COVERS
This warranty extends only to the original user of the equipment (“you”, ”your”) and is
limited to the purchase price of each part. Amphony and its affiliated companies (”we”,
”our”, ”us”) warrant this Wireless Transmitter / Amplifier Set against defects in materials
or workmanship as follows.
For a period of ninety (90) days from the original date of purchase, if we
determine that the equipment is defective subject to the limitations of this warranty, we
will replace it at no charge for labor. We warrant any such work done against defects in
materials or workmanship for the remaining portion of the original warranty period.
For a period of one (1) year from the original date of purchase, we will supply,
at no charge, new or rebuilt replacement parts in exchange for parts we determine are
defective subject to the limitations of this warranty. We warrant any such replacement
parts against defects in materials or workmanship for the remaining portion of the
original warranty period.
”Parts” means items included in this package. It does include other parts
purchased separately.
LABOR:
PARTS:
Note: not
WHAT YOUR WARRANTY DOES NOT COVER
This warranty consumer instruction, physical setup or adjustment of any
consumer electronic equipment, or signal transmission problems.
This warranty cosmetic damage, damage due to the affixing of any
attachment not provided with the product, loss of parts, connecting the product to any
but the specified receptacles, lightning, electrical surges, fire, flood, or other acts of
God, accident, misuse, abuse, repair or alteration by other than authorized service
personnel, negligence, commercial or institutional use, or improper or neglected
maintenance.
This warranty equipment sold AS IS or WITH ALL FAULTS, equipment
removal or reinstallation, shipping damage if the equipment was not packed and
shipped in the manner we prescribe, nor equipment purchased, serviced, or operated
outside the contiguous United States of America.
does not cover
does not cover
does not cover
0
5
25
75
95
100
