Amprobe FLASH-200SP User manual

FLASH-200SP
Super Bright LED Spotlight
Users Manual
April 2010, Rev.1
©2010 Amprobe Test Tools.
All rights reserved. Printed in China
English
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

FLASH-200SP Flashlight
1) Head-Lamp
2) 3 Position Gear Selector Switch
3) Handle
4) ON/OFF Switch
5) Handheld
6) Battery Room
7) Battery Cover
1
3
2
4
5
6
7

CONTENTS
SYMBOLS............................................................................ 2
UNPACKING AND INSPECTION .......................................... 2
INTRODUCTION .................................................................. 3
Features .......................................................................... 3
OPERATION......................................................................... 3
SPECIFICATION.................................................................... 5
BATTERY REPLACEMENT.................................................... 5

2
SYMBOLS
�Caution! Refer to the explanation in this Manual
=Do not dispose of this clamp meter as unsorted
municipal waste.
�WARNING and PRECAUTIONS
• Do not look at the LED light directly
• Do not allow children to use the LED light alone
• Flashlight surface maybe hot after using
UNPACKING AND INSPECTION
Your shipping carton should include:
1 FLASH-200SP Flashlight
4 AA Rechargeable Batteries
1 AC Power Adaptor
1 Vehicle charger
1 Manual
If any of the items are damaged or missing, return
the complete package to the place of purchase for an
exchange.
INTRODUCTION
The flashlight FLASH-200SP is a portable electric spotlight,
the whole body is made of metal; it can be used in most
of worst condition.
Features
• Osram Cree XRE Q4 LED
• Maximum light output:

3
High beam – up to 200 lumens
Low beam – up to 20 lumens
Strobe – up to 200 lumens
• Illuminating distance (under dark condition):
High beam – up to 350m
Low beam – up to 50m
• Continuous run time:
Min. 4 hours (high beam and 100% light on)
• IPX4 Waterproof
• Powered by 4 AA size rechargeable batteries
• Product size: 170.5 x 184.5 x 88 mm (6.7 x 7.3 x 3.4
inch)
OPERATING
1. Unscrew the battery cover and install 4 AA size
rechargeable batteries into battery room.
2. Screw on the battery cover.
3. Push ON/OFF button; and turn on flashlight
SPECIFICATION
Maximum light output:
High beam – up to 200 lumens
Low beam – up to 20 lumens
Strobe – up to 200 lumens
Continuous run time : Min. 4 hours (high beam)
Battery: AA rechargeable battery x 4
Product size: 170.5 x 184.5 x 88 mm (6.7 x 7.3 x 3.4 inch)

4
BATTERY REPLACEMENT
Refer to the following figure to replace the batteries:
ON / O FF S WI TC H
4 PC S “A A” S IZ E BAT TE RI ES
AA Size
AA Size