ACME LED-MS350B User manual






LED‐MS350B



UserManual
Pleasereadtheinstructioncarefullybeforeuse


1B

CONTENTS

1.SafetyInstruction .....................................................................................................2
2.TechnicalSpecifications ............................................................................................3
3.HowToSetTheUnit .................................................................................................5
3.1FixtureOverview ................................................................................................5
3.2MainFunction ....................................................................................................6
3.3HomePositionAdjustment...............................................................................13
4.HowtoControltheUnit .........................................................................................14
4.1Master/SlaveBuiltInPreprogrammedFunction ..............................................15
4.2EasyController..................................................................................................15
4.3DMXController.................................................................................................16
5.DMX512Configuration ...........................................................................................17
6.DMXConnection ....................................................................................................19
7.Troubleshooting......................................................................................................20
8.FixtureCleaning......................................................................................................21





2B
1.SafetyInstruction

WARNING
PleasekeepthisUserGuideforfutureconsultation.Ifyouselltheunittoanotheruser,besure
thattheyalsoreceivethisinstructionmanual.
yUnpackandcheckcarefullythereisnotransportationdamagebeforeusingtheunit.
yBeforeoperating,ensurethatthevoltageandfrequencyofpowersupplymatchthepower
requirementsoftheunit.
yIt’simportanttogroundtheyellow/greenconductortoearthinordertoavoidelectricshock.
yTheunitisforindooruseonly.Useonlyinadrylocation.
yTheunitmustbeinstalledinalocationwithadequateventilation,atleast50cmfromadjacent
surfaces.Besurethatnoventilationslotsareblocked.
yDisconnectmainpowerbeforereplacementorservicing.
yMakesuretherearenoflammablematerialsclosetotheunitwhileoperatingasitisfirehazard.
yUsesafetycablewhenfixesthisunit.DONOThandletheunitbytakingitsheadonly,butalways
bytakingitsbase.
yMaximumambienttemperatureisTa:40℃.DONOToperateitwherethetemperatureishigher
thanthis.
yUnitsurfacetemperaturemayreachupto85℃.DONOTtouchthehousingbare‐handduringits
operation.Turnoffthepowerandallowabout15minutesfortheunittocooldownbefore
replacingorserving.
yIntheeventofseriousoperatingproblem,stopusingtheunitimmediately.Nevertrytorepair
theunitbyyourself.Repairscarriedoutbyunskilledpeoplecanleadtodamageormalfunction.
Pleasecontactthenearestauthorizedtechnicalassistancecenter.Alwaysusethesametype
spareparts.
yDONOTtouchanywireduringoperationashighvoltagemightbecausingelectricshock.
Warning
yTopreventorreducetheriskofelectricalshockorfire,donotexposetheunittorainor
Pleasereadtheinstructioncarefullywhichincludesimportant
informationabouttheinstallation,usageandmaintenance.

3B
moisture.
yDONOTopentheunitwithinfiveminutesafterswitchingoff.
yThehousing,thelenses,ortheultravioletfiltermustbereplacediftheyarevisiblydamaged.




Caution
Therearenouserserviceablepartsinsidetheunit.DONOTopenthehousingorattemptany
repairsyourself.Intheunlikelyeventyourunitmayrequireservice,pleasecontactyournearest
dealer.
Installation
Theunitshouldbemountedviaitsscrewholesonthebracket.Alwaysensurethattheunitis
firmlyfixedtoavoidvibrationandslippingwhileoperating.Andmakesurethatthestructureto
whichyouareattachingtheunitissecureandisabletosupportaweightof10timesoftheunit’s
weight.Alsoalwaysuseasafetycablethatcanhold12timesoftheweightoftheunitwhen
installingthefixture.
Theequipmentmustbefixedbyprofessionals.Anditmustbefixedataplacewhereisoutofthe
touchofpeopleandhasnoonepassbyorunderit.

2.TechnicalSpecifications
Constructions:
Stylishdesignwithfireretardantplastichousing
FasteningSystem:2XOmegaclamps
Excellentventilationforreliableoperation
RotatingGoboWheel:6rotatingandchangeablegobosplusopen
ColorWheel:8colorspluswhite
ForAC120V,60Hzpowersupply,maximumfixturesthatcanbeconnectedtogetherfrom
thesamemainsoutletis4pcs;
ForAC230V,50Hzpowersupply,maximumfixturesthatcanbeconnectedtogetherfrom
thesamemainsoutletis8pcs;

4B
Pan/Tilt:
Pan/Tilt:540°/270°
AutomaticPan/Tiltpositioncorrection
Easycalibrationandmaintenancebymagnetichomepositioning
Control:
3DMXcontrolmodes:DMX,Master/SlaveMode,SoundActivemode
DMXchannelmodes:8/11CH
LEDdisplayforeasynavigationandaddressing
0~100%smoothdimmingandvariablestrobespeeds
DataIn/Out:3‐PINXLRsockets
RDA:RemoteDMXaddressing,DMXaddresscanberemotelysetupbyuniversalcontroller
Specification:
yPowerVoltage:AC100~240V,50/60Hz
yPowerConsumption:134W
yLightSource:1x60WWhiteLED
yBeamAngle:15°
yDimension:292x169x425mm
yWeight:7.2Kgs


5B
3.HowToSetTheUnit
3.1FixtureOverview

1.LED:
DMXOnDMXinputpresent
MASTEROnMasterMode
SLAVEOnSlaveMode
SOUNDFlashingSoundactivation
2.LEDDisplay:
Usedtoshowthevariousmenusandtheselectedfunctions;
3.Button:
MENUToselecttheprogrammingfunctions
  DOWNTogobackwardintheselectedfunctions
  UPTogoforwardintheselectedfunctions
ENTERToconfirmtheselectedfunctions
4.PowerIN/OUT:
Usedtoconnectthefixturetomainspower.
5.DMXIN:
ForDMX512link,use3‐pinXLRplugcabletolinktheDMXcontrollerandthefixture,and

6B
inputtheDMXsignal.
6.DMXOUT:
ForDMX512link,use3‐pinXLRplugcabletolinkthenextfixtureandoutputtheDMXsignal.
7.Fuse(T3.15A):
Usedtoprotectthefixturefromdamageofovercurrent.
8.OnlyForRemoteControl:
UsedtoconnectwithoptionalCA‐8tocontrolthefixtureforStandby,FunctionandMode
select.
3.2MainFunction
Toselectanyfunctions,presstheMENUbuttonuntiltherequiredfunctionisshowingonthe
display.SelectthefunctionbypressingtheENTERbuttonandthedisplaywillblink.Usethe
DOWNandUPbuttontochangethemode.Oncetherequiredmodehasbeenselected,pressthe
ENTERbuttontosetuptogobacktothefunctionswithoutanychangespresstheMENUbutton
again.HoldandpresstheMENUbuttonforonesecondorwaitforoneminutetoexitthemenu
mode.
Themainfunctionsareshownbelow:


7B


8B
DMX512ADDRESS
Toselectthe,presstheENTERbuttontoshowtheDMXADDRESSonthedisplay.Usethe
DOWN/UPbuttontoadjusttheaddressfrom1to512.Oncetheaddresshasbeenselected,press
theENTERbuttontosetup,togobacktothefunctionswithoutanychangespresstheMENU
buttonagain.HoldandpresstheMENUbuttonforonesecondorwaitforoneminutetoexitthe
menumode.

CHANNELMODE
Toselectthe,presstheENTERbuttontoshowtheDMXCHANNELMODEonthedisplay.
UsetheDOWN/UPbuttontoselectthe8CHor11CHmode.Oncethemodehasbeenselected,
presstheENTERbuttontosetup,togobacktothefunctionswithoutanychangespresstheMENU
buttonagain.HoldandpresstheMENUbuttonforonesecondorwaitforoneminutetoexitthe
menumode.

SHOWMODE
Toselectthe,presstheENTERbuttontoshowtheSHOWMODEonthedisplay.Usethe
DOWN/UPbuttontoselectthe(Show1),  (Show2),  (Show3)or
(Show4)mode.Oncetheshowmodehasbeenselected,presstheENTERbuttontosetup,togo
backtothefunctionswithoutanychangespresstheMENUbuttonagain.Holdandpressthe
MENUbuttonforonesecondorwaitforoneminutetoexitthemenumode.

SPLITCOLORMODE
Toselectthe,presstheENTERbuttontoshowtheSPLITCOLORMODEonthedisplay.Use
theDOWN/UPbuttontoselectthe  (splitcolormode)or  (normal).Oncethemode
hasbeenselected,presstheENTERbuttontosetup,togobacktothefunctionswithoutany
changespresstheMENUbuttonagain.HoldandpresstheMENUbuttonforonesecondorwait
foroneminutetoexitthemenumode.

9B
SLAVEMODE
Toselectthe,presstheENTERbuttontoshowtheSLAVEMODEonthedisplay.Usethe
DOWN/UPbuttontoselectthe  (normal),  (2lightshow)mode.Oncethemodehas
beenselected,presstheENTERbuttontosetup,togobacktothefunctionswithoutanychanges
presstheMENUbuttonagain.HoldandpresstheMENUbuttonforonesecondorwaitforone
minutetoexitthemenumode.

BLACKOUTMODE
Toselectthe,presstheENTERbuttontoshowtheBALCKOUTMODEonthedisplay.Use
theDOWN/UPbuttontoselectthe(blackout)or  (normal)mode.Oncethemode
hasbeenselected,presstheENTERbuttontosetup,togobacktothefunctionswithoutany
changespresstheMENUbuttonagain.HoldandpresstheMENUbuttonforonesecondorwait
foroneminutetoexitthemenumode.

SOUNDMODE
Toselectthe,presstheENTERbuttontoshowtheSOUNDMODEonthedisplay.Usethe
DOWN/UPbuttontoselectthe  (soundmodeon)or  (soundmodeoff).Oncethe
modehasbeenselected,presstheENTERbuttontosetup,togobacktothefunctionswithoutany
changespresstheMENUbuttonagain.HoldandpresstheMENUbuttonforonesecondorwait
foroneminutetoexitthemenumode.

SOUNDSENSE
Toselectthe,presstheENTERbuttontoshowtheSOUNDSENSEonthedisplay.Usethe
DOWN/UPbuttontoadjustthesoundsensitivityfrom0to100.Onceselected,presstheENTER
buttontosetup,togobacktothefunctionswithoutanychangespresstheMENUbuttonagain.
HoldandpresstheMENUbuttonforonesecondorwaitforoneminutetoexitthemenumode.

