518-877-8560 www.AMTMotorsport.com Rev 4-20
Installation
We installed this pedal on our car before we included the handy dandy pedal template.
You can cut out the template on the back of this instruction booklet if you’d like to drill
the holes in your pedal without the extension in place. We’ll be demonstrating the
process with the actual pedal extension.
1. Here’s the stock C5/C6 Corvette
Pedal. Obviously our pedal
extension was already installed on
this vehicle but you can either A)
Pretend you don’t see the holes or
B) Realize from this picture
approximately where you’ll be
drilling the holes on your gas pedal
2. Affix Tape or Something on the back of
the Pedal Extension so it sticks to your
gas pedal. Or feel free to wrap it around
the outside of the extension and tape to
gas pedal. Or this would be the point
where you’d cut out the template and
stick it right over the gas pedal.
