Analog Devices ADIS16COM1/PCBZ User manual

One Technology Way · P.O. Box 9106 · Norwood, MA 02062-9106 · Tel: [phone] · Fax: [phone] · www.analog.com
Rev 29 Aug 2013 21:21 | Page 1
ADIS16COM1/PCBZ Breakout Board Wiki Guide
OVERVIEW
The ADIS16COM1/PCBZ provides a breakout function for the ADIS16000CMLZ, which pairs with the
ADIS16229AMLZ to provide the sensor, signal processing and transceiver function for a wireless
vibration sensing system.
Here is a picture of the contents that come with the ADIS16COM1/PCBZ.
ADIS16COM1/PCBZ MOUNTING HOLES
The ADIS16COM1/PCBZ provides 4 mounting holes that line up with mounting “A” Labeled holes on
the EVAL-ADIS and supports the following products: ADIS16000AMLZ ADIS16229AMLZ products.
Please see the following picture for device mounting hole locations.

Rev 29 Aug 2013 21:21 | Page 2
EVAL-ADIS Mounting
Use the M2x0.4x6mm machine screws (provided in pink bag ANALOGKIT2) for mounting the
ADIS16COM1/PCBZ to the EVAL-ADIS and set their torque for 20 inch-ounces. The red-highlights in the
top-view picture illustrate the location of the mounting holes.
ADIS16000 Mounting on ADIS16COM1/PCBZ
Use the M3x0.5x12mm machine screws and M3x.5x Hex nuts with the M3 washers optional(provided
in pink bag ANALOGKIT2) for mounting ADIS16000AMLZ product to the ADIS16COM1/PCBZ and set
their torque for 20 inch-ounces. The red-highlights in the top-view picture illustrate the location of the
mounting holes for these products. Attach the 16 pin ribbon cable included with the EVAL-ADIS to
connect the J1 connectors. For high-vibration environments, consider using more than 2 screws, per
AN-1045

Rev 29 Aug 2013 21:21 | Page 3
WARNING: Make sure that the connector pins are in alignment with J1 on the
EVAL-ADIS and J1 on the ADIS16COM1/PCBZ, before pressing it into place.

Rev 29 Aug 2013 21:21 | Page 4
Here is a close-up view, which shows a few slides of the correct connector alignment .

Rev 29 Aug 2013 21:21 | Page 5
© Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners. www.analog.com