Ancom ODAG065X9-A4 User manual

Model Number:
ODAG065X9-A4
Outdoor Wide-band Directional Antenna, X-pol, 698-960/1710-2170/2400-2700MHz, 6.5-9dBi
Rev:2016-0-2i
*Information contained in this document is subject to confirmation at time of ordering.
1/2
Electrical Specifications
Frequency Range
MHz
698-864
870-960
1710-1880
1920-2170
2400-2500
2490-2700
Gain
dBi
6.5
7.0
8.5
9.0
8.0
7.5
Polarization
+/-45
Beam-width
Horizontal
deg
78
73
65
60
Vertical
70
55/65
75/55
VSWR
≤2.0:1
Isolation
dB
25 (typ.)
PIM3
dBc
≤-150@2x43dBm
Power Handling
W
100
50
Impedance
Ω
50
Mechanical Specifications
Dimensions, HxWxD
mm (in)
310x200x75 (12.2x7.9x3.0)
Weight without Bracket
kg (lb)
1.0 (2.2)
Radome Material and Color
ABS, white
Reflector Material
Aluminum
Radiating Element Material
Brass and PCB
Connector Type
2 xN-F
Environmental Class
Outdoor and Indoor
Mounting
Wall mount with bracket
Shipping Dimensions, HxWxD
mm (in)
440x215x95 (17.3x8.5x3.7)
Operational Temperature
°C
-55 to +70
Operational Humidity
%
≤ 95
Shipping Weight
kg (lb)
1.75 (3.9)
Radiation Patterns
Co/X-pole
Horizontal
pattern
Vertical
pattern
+ 45deg Port
-45deg Port
Features and Product Description
Broadband, coverage for 698-960/1710-2700MHz 2x2 MIMO application.
Typically used in outdoor micro-cell or in-building distribution of
2G/3G/LTE and WLAN(Wi-Fi) services.
Aesthetically pleasing and easy for in-building or outdoor installations.
2-axial mounting bracket is supplied.

Model Number:
ODAG065X9-A4
Outdoor Wide-band Directional Antenna, X-pol, 698-960/1710-2170/2400-2700MHz, 6.5-9dBi
Rev:2016-0-2i
*Information contained in this document is subject to confirmation at time of ordering.
2/2
Note for Installation and Preparation
Thanks for choosing our product! Before exciting installation, please read this guide carefully.
Make sure qualified personnel are hired for installing this product such as working at height
with safety awareness, tools operating skills, and etc.
Please check the items against the below packing list and make sure the product is in good
condition without any damage and none is missing.
Check the necessary installation tools below are prepared on site before the installation.
Find proper position and the mounting area to mount this antenna based on the coverage
design and planning documents.
Wall Mounting Instruction
STEP1: Mount one part of bracket on the back
of antenna as shown and fix the 4 screws firmly.
STEP2: Mount another part of bracket on the wall
as shown.
STEP3: Connect the both parts of brackets.
Adjust the antenna azimuth direction and fix the
4 screws firmly
STEP4: Adjust the antenna elevation angle and fix
the 4 screws firmly.
STEP5: Joint the connectors with system and implement water-proof measure for connections.
Packing List
List of Installation Tools
Antenna with 4*M4*8 Screws
1
Percussion Drill andΦ10mm bit
Bracket Kits
1
4mm Hexagon Wrench (Supplied)
St 6.5*40 Tapping Screw
4
Philips Screwdriver (Supplied)
10*50mm Plastic Plug
4
Hexagon/Philips Screwdriver
1
QC Check