Ancona Eleganzia User manual

© ®
P S I
G P M
Widespread Lavatory Bathroom Faucet
STANDARDS
Tools:
PLUMBERS PUTTY FLASHLIGHT BASIN WRENCH
SAFETY GLASSES SCREWDRIVER
PLIERSCHANNELLOCKS ADJUSTABLE WRENCH
HEX-KEY TAPE
Attention:
Helpful Information
Flow Rate Chart
Important
Eleganzia
2017-12-22 MAAN4321-1
SEALED-TUBE
Please keep the tools for future use!
ASME A112.18.1/CSA B125.1
ASME A112.18.2/CSA B125.2
LISTED IAPMO/cUPC
Gather the necessary tools as shown below to complete the installation of
this faucet. Some may not be needed depending on the model of faucet you
are installing. Check with your local hardware store on the requirements of
your installation situation.
WARNING:
For easy installation, you will need:
- To read all the installation instructions completely before beginning.
- To read all the warning, attention and maintenance information.
- To purchase the proper supply lines.
Tighten connection with two wrench to prevent
damage to tube body. Be careful not to bend the
stem as this will void the product warranty.
Connect to water supply lines with either
risers with the coupling nuts or
supplied tube head interior connector or
A. B. C.

Faucet Installation
1
2
Tools might be applied to the following places:
Installation size map
Position the body with o-ring on the installation
surface as shown, secure it with metal washer
and tighten the lock nut with basin wrench.
Position the handle on installation
surface as shown and secure it with
fixing kit and tighten the screw with
screwdriver. Repeat the above steps
for the other handle.
Caution: please be careful with the
position of hot and cold handles.
2 5/16 in.
(58 mm)
2 3/16 in.
(55 mm)
4 5/8 in.
(117.3 mm)
3 9/16 in.
(89.8 mm)
4 1/2 in.
(115 mm)
1 3/16 in.
(30 mm)
1 3/16 in.
(30 mm) 1/2-14NPSM
8 - 12 in.
(203 - 304 mm)
8 1/8 in.
(206.5 mm)
4 1/8 in.
(104.3 mm)
6 11/16 in.
(169.4 mm)
5 1/2 in.
(140.3 mm)

Checking and Testing
Maintenance:
3
4
5
Position the flexible hose and fix it
to the faucet as shown with clamp
spring.
Connect the water supply lines to
faucet and water supply valve and
tighten with wrench.
Warning: The water supply
valves mentioned above are not
included, please purchase them
at your local hardware store.
6
Turn the faucet handle all the way
on, turn on hot and cold water
supply and flush water lines for
one minute. Reinstall aerator by
hand
Check all connections at arrows for
leaks, retighten if necessary.
BUT DON’T OVERTIGHTEN
Simply rinse the surface with clear water or
mild liquid detergents (if necessary). Dry the
faucet with a clean soft cotton cloth. Do not
use any cleaning agents containing acids
polish abrasives or harsh cleaners.
WARNING:
DON'T OVERTIGHTEN!
HOT
COLD
1/2” (13 mm) IPS

1. Clean it with water and dry it with soft cloth.
2. Clean the product with gentle liquid or glass cleaner.
3. Don't use acid cleaner.
4. Don't clean with abrasive material, abrasive paper or knife.
Parts listCleaning and care
Daily cleaning and care are required in order to keep the product shining and working properly.
NO.PART NAME
Handle assembly1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Lock nut
O-ring
Water valve assembly
Gasket assembly
Lock nut
Screw
Clamp spring
Spout
O-ring
Aerator
Body
O-ring
Screw
O-ring
Copper tube
Washer
O-ring
O-ring
20 Plastic lock ring
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Flexible hose21
22
23
24
25
26
27
28
29
30
31
Clamp
Lock nut
Diverter cover
Lift rod
Left connector
Screen filter
Nut
Watersaving piece
Connector
Flexible hose