Anderic RRDYS01 User manual

ANDERIC® RRDYS01
Operating Manual
The Anderic® RRDYS01 Remote Control
is to work with Dyson® Hot, Cool,
Humidifier, and Purifying upright floor
fans.
Installing Batteries
Please insert two AAA batteries (sold
separately) into the battery compartment
behind the battery door on the back of the
remote. You may need to remove the
screw securing the battery cover. Please
make sure to match polarities when
installing the batteries. Slide the battery
cover down toward the bottom of the
remote to remove it, then replace it after
installing the batteries. The battery cover
screw is optional and is not needed to
secure the battery cover to the remote.
Optional security cable (sold
separately)
This remote has an optional security cable
(sold separately) attachment. You can
purchase this security cable from
Anderic.com/CBL01. Part number:
CBL01.
Programming to your fan:
1. Locate your model fan in the
programming chart below.
2. Press and hold the two keys shown
beside your fan model for about 3
seconds. The indicator light will
blink twice and release the keys.
Note: Please refer to the Key
Operations Chart to see which keys
should operate. If your fan does not
serve as expected, you can also try
the other codes; there may be a better-
suited code. The RRDYS01 is a
universal remote but may not work on
all models of fans.
Programming chart
Press & hold keys:
Fan model(s):
1
&
TP01, TP02,
DP02
2
&
PH02
3
&
HP09
4
&
HP07
5
&
TP04, TP05,
969154
6
&
HP02, 967826
7
&
AM10
8
&
BP01, 970192
9
&
TP04, TP05,
969154
10
&
TP06
11
&
AM05, AM04,
922662
12
&
HP01, 967197
13
&
AM06, AM08,
965824

Learning Instructions:
Note: All keys
on the RRDYS01 are
learnable, and an original remote is
needed. This method does not require
codes.
1. Press and hold the &
keys simultaneously for about 5
seconds; the indicator light will
illuminate brighter and remain
bright. Release the keys.
2. Point the original remote control
head-to-head with the RRDYS01,
aligning top edges at about 1-2
inches apart (both remotes should
be pointing at each other).
3. On the RRDYS01, Press and
release the first key to be learned,
and the indicator light will now
flash slowly.
4. On the original remote, press and
hold the key that you want to learn
to the corresponding key
previously pressed on the
RRDYS01. The indicator light will
flash three times to confirm and
then remain on, waiting for the
following key to learn.
5. Repeat steps 2-4 to learn other
keys.
6. Press & keys
simultaneously to save and exit;
otherwise remote will exit
automatically after 20 seconds.
Delete all learned keys
1. Press and hold & keys
simultaneously for 3 seconds; the
indicator light will flash twice to
confirm. The deletion of all learned
keys is now complete.
Reset to factory default status
1. Press and hold & keys
simultaneously for 3 seconds; the
indicator will flash twice to confirm.
Reset to factory default is now
complete.
Help: Go to Anderic.com/rrdys01
Legal: Anderic is a registered trademark of Dan’s Electronics
Etc., Inc. All rights reserved. Dyson® is a registered trademark
of Dyson Limited. Dan’s Electronics Etc., Inc. has no affiliation
with Dyson Ltd.
Press & hold keys:
Fun model:
1
&
Reset to factory
default
2
&
Exit learning mode
3
&
Enter learning
mode
4
&
Delete all learned
keys

Key Operations Chart
Refer to the below chart to determine which keys are active and the key descriptions.
KEY
Key description
Code number
(Refer to the Programming Chart above)
1
2
3
4
5
6
7
8
9
10
11
12
13
POWER
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
FILTER INFORMATION
✓
✓
✓
✓
✓
✓
✓
AUTO MODE (PURIFY)
✓
✓
✓
✓
✓
✓
✓
AUTO MODE (HUMIDIFY)
✓
✓
HEATING CONTROL
(INCREASE TEMP)
✓
✓
✓
✓
✓
HEATING CONTROL
(DECREASE TEMP)
✓
✓
✓
✓
✓
FAN SPEED (INCREASE)
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
FAN SPEED (DECREASE)
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
ON/OFF HUMIDIFIER
✓
ON/OFF SLEEP TIMER
✓
✓
✓
✓
ON/OFF COOLING MODE
✓
✓
✓
✓
FOCUSED MODE
✓
✓
DIFFUSED MODE
✓
✓
SLEEP TIMER (INCREASE)
✓
✓
✓
✓
✓
✓
SLEEP TIMER (DECREASE)
✓
✓
HUMIDITY CONTROL
(INCREASE)
✓
✓
HUMIDITY CONTROL
(DECREASE)
✓
✓
ON/OFF OSCILLATION
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
AIRFLOW DIRECTION
✓
✓
✓
✓
✓
ON/OFF NIGHT MODE
✓
✓
✓
✓
✓
✓
✓