ANDESFIT ADF-B829 User manual

ANDESFIT LIMTIED
Unit513, Lakeside 1, No.8 Science Park West Ave,
Hong Kong Science Park, Hong Kong
Customer Services: (852) 35951880
www.andesfit.com
ADF-B829
Wireless Body Fat / Hydration Scale
INSTRUCTION MANUAL

NOTE
1. You should place scale on clear, flat surface be fore use.
2. Do not place scale on wet, severely hot or extremely cold surfaces.
3. Do not jump or stomp on scale. Do not attempt to disassemble the
scale.
4. To avoid falling off scale, do not stand on the scale to avoid glass
and electrode wear out.
5. Do not ware shoes when standing on the scale to avoid glass and
electrode wear out.
6. Never submerge the unit in water. Use alcohol to clean the electrodes
and glass cleaner to keep them shiny, applied to a cloth first; avoid
soaps.
7. For home use only. Not for professional use. Body fat percentage and
hydration percentage is reference only. You should consult a doctor
when you undertake any diet or exercise program.
8. Check battery if scale malfunction. If necessary, install a new battery.
For other problems, please contact your local franchiser or contact
our company for repair.
-8-

THE COMPARISON SHEET OF
HYDRATION MEASURED
AND HYDRATION STANDARD LEVEL
Because of differences in geographic areas and locations, the body fat percentage
standards and percentage standards can vary. This sheet is for reference only.
Please remember your personal key. You do not need to program personal key the next
time you use scale. You can use the personal key you have already stored.
-7-
CONTENTS
Caution ------------------------------------------------------------------ 1
Key features ------------------------------------------------------------ 2
Preparation before use------------------------------------------------- 3
Set procedures --------------------------------------------------------- 4
Quick Start guide ------------------------------------------------------ 4
Date setting ------------------------------------------------------------- 5
Body fat ranges for standard adults --------------------------------- 6
The comparison sheet of hydration measured --------------------- 7
and hydration standard level
Note --------------------------------------------------------------------- 8

Thank you for choosing this Bluetooth 4.0 Electronic Body Fat and Hydration Scale of
our series products. To ensure proper operation and to maintain the lifespan and the
utmost accuracy of the scale, please read this manual carefully before use.
Read this Instruction Manual carefully and keep it for future reference.
CAUTION
1. Personals with pacemakers should not use this product.
2. Personals with metal implants will be unable to obtain accurate readings.
3. To ensure accuracy, we suggest using scale at the same time every night (19:00-21:00).
4. The “Errr” on scale display indicates overload. “Err2” display indicates fat percentage
measurement error.
5. If body fat percentage is less than 5%, indicator displays “FATL” If more than 50%
indicator displays “FATH” If impedance measuring makes an error, indicator will display
“Err2”.
LCD Display
-1-
Step on the scale gently and keep your bare feet in touch with the electrodes. Stand still
and erect to get your weight measured and your body fat, hydration, muscle and bone
percentage will be displayed respectively on the screen within seconds. These results will
be repeated for two times and the scale will be auto off if no further using.
Body Fat Ranges for Standard Adults
-6-

DATA SETTING
For weight only
Step on the scale gently and it will get ready for use when the
screen shows "0.0kg" after full display, and you can press the
scale back key to switch within different units(kg/lb/st)
Step on the scale gently, position your feet
evenly near the center and keep your body
still and erect until the scale stabilizes your
weight. The scale will be auto off if no
further using.
For weight, body fat, hydration, muscle and
bone percentage:
Press the "SET" key for seconds to set your
personal data. Press “ ” or “ ” key to select
a number from P0 to P9 as your personal code
when the code number flashes on the screen
and once you reach your target number, please
press "SET" to confirm.
Press “ ” or “ ” to choose
Male or Female, when the gender
symbol flashes on the screen and then
press “SET” to conform.
Press “ ” or “ ” to reach your target
age(10-80), when “age” and the number
flash on the screen and then press “SET”
to confirm.
Press “ ” or “ ” to reach your target
age(100-240cm) when the number and
“cm” flash on the screen and then press
”SET” to confirm.
-5-
KEY FEATURES
Bluetooth 4.0 compatible
This product adopts advanced BIA ( Bioelectrical Impedance Analysis )
technology to measure body fat, hydration, muscle and bone percentage by
sending a safe low-tension electric current through the body and the difference
of electrical conductive property of body fat from other tissues is analyzed and
processed by the CPU to get the body component percentage, then the results
are displayed on the LCD screen to offer you reference.
Also display BMI parameter, more reference data.
High precision strain gauge sensors system ensures more accurate weighing
results.
Tempered glass platform of high quality and modern design make the scales
safe and fashionable.
Smart memory of up to 10 persons' information offers you more convenience
in daily use.
Capacity: 2kg-150kg
Division: 0.1kg
Auto zero & Auto off
Low battery and over load indication
Free switch within three different units: kg/lb/st
Powered by 4X1.5V AAA batteries and four free batteries are packed in the
box.
-2-

PREPARATION BEFORE USE
About Buttons
SET UP DOWN
Set button: Power on, Menu select and confirm
Key: Up
Key: Down
Introduction of using and installing the batteries
Use 4*AAA Batteries
Find the two lithium cell in the packet and the battery holder
at the back of the scale, open the cover, install the battery
into the holder and cover it back.
Place the scale on hard and flat surface. Clean floor is best.
-3-
Setup Procedures
Prior to first use, Download and install "Andesfit Health" application
on your device. (Bluetooth 4.0 capabilities, e.g. iOS 7.0 or above
iPhone 4S, 5,6, iPad3 gen or above Android 4.3)
QUICK START GUIDE
Connect device via Bluetooth:
1. Turn Bluetooth "On" under the "Settings" menu on the device
2. Open "Andesfit Health" application
Press the "Weight" button on Measurement screen.
3. Press “ Start Measurement” button.
4. When the measurement is complete, the weight, body fat, hydration,
muscle and bone percentage will display on Scale monitor & press"
Save".
5. All measurement data will be saved in the app.
-4-