ANDlight VOLUMES Series User manual

andlight.ca
SPOTLIGHT
VOLUMES SERIES
TABLE
DESIGNER
LUKAS PEET
Inspired by spotlights, the Spotlight
Volumes series is based on four
unique shade profiles which
combine in various ways.
NORTH AMERICA + WORLD
INSTRUCTIONS
SCAN HERE

2MODIFIED: 11/17/21
GLASS GLOBE
PLUG
A19 L AMP
SWITCH
LAMP SHADE
CARE INSTRUCTIONS
Always wear clean gloves when
handling the luminaire.
Clean painted surfaces with a soft,
lint-free cloth. Clean glass with a
soft lint-free cloth and a standard
glass cleaner.
For replacement glass globes,
contact ANDlight directly.
Never exceed the recommended
max wattage and voltage as doing
so may damage the luminaire or
cause a fire.

3
KNOT DETAIL
*DO NOT UNKNOT
ON / OFF + DIMMING
Plug the Spotlight into the
wall receptacle.
Rotate the switch to turn the
Spotlight on, off and to adjust
the brightness.
Install lamping and
glass globe.
To install lamping, turn the lamp
clockwise into the socket.
If the lamp does not turn on
when the power is connected, try
threading the lamp further into the
lamp socket.
To attach the glass globe, turn the
the thumb screws clockwise into the
globe holder. Turn all three until the
glass globe is secure.

andlight.ca
For support, please contact:
[e-mail]
[phone]
ANDlight
1951 Franklin St,
Vancouver, BC
Canada V5L 0C7