Anets GoldenFRY FM-14 Installation guide

1 L20-386 R2
Anets, Inc.
PO Box 501 Concord, New Hampshire 03302-0501
Tel: [phone] • Fax: [phone]
GoldenFRY
Models
FM-14 Filter Mate
FM-18 Filter Mate
ModelFiltII-14Wshownbanked
to(2)14”fryers
ModelFM-14FilterMate
shownunderthebasesystem
of(2)14”fryers
DANGER
Improperinstallation,adjustment,alteration,service,ormaintenancecan
cause property damage, injury or death. Read the installation, operating
andmaintenanceinstructionsthoroughlybeforeinstallingorservicingthis
equipment.
WARNING
After installation of this equipment, immediately contact your local gas
supplier to obtain information about what action to take whenever any
person smells gas. Post this information in a prominent location.
Keep this Manual in a Convenient Location for Reference
The Anets GoldenLine
Quality Equipment For The Restaurant, Supermarket, and Bakery Industries
Filt II-14/14W Filtronic
Filt II-18/18W Filtronic
Installation,
User Operation
&
Maintenance
Manual
! FOR YOUR SAFETY
DONOTstoreoruse gasolineor other flammablevapors
or liquids inthe vicinity of this orany otherappliance.
FM-14
FM-18
FiltII-14/14W
FiltII-18/18W
!

2 L20-386 R2
TABLE OF CONTENTS
ShippingContainerInspection ....................................................... 2
CodeRequirements ...................................................................... 2
FilterUnitPreparationInstructions ................................................ 3
FilterSystemDiagrams .................................................................. 4
FilteringInstructions ...................................................................... 5
OilDisposalInstructions ............................................................... 6
ReplacingtheFilterPaper ............................................................ 7
FilterTroubleshootingGuide .......................................................... 8
FilterWarranty .............................................................................. 9
SHIPPING CONTAINER INSPECTION
1 . Carefullyexaminetheshippingcontainerforexternaldamage. Whendamageisnoted,notifythe
deliverycarrierimmediately. Saveallpackingmaterialsfordamageclaimexamination.
2 . Ifnoexternaldamageisnoted,removetheshippingcontainerfromthefilterandexaminetheunit
carefullyfordamage. Placethefilterinasafelocation,ifdamageisnoted,sothatthefreightdamage
claimsadjustercanexamineit.
Models Covered By This Manual
FM-14 Filter Mate, Under Fryer Filter System - 14”
FM-18 Filter Mate, Under Fryer Filter System - 18”
Filt II-14 14” Filtronic Filter System in Cabinet
Filt II-14W 14” Filtronic Filter System with Heat Lamp
Filt II-18 18” Filtronic Filter System in Cabinet
Filt II-18W 18” Filtronic Filter System with Heat Lamp
Standard Accessories furnishedintheshippingcartonwiththisfilterinclude:
(1) Filter Screen Assembly
(1) Sample Package Filter Paper
OtheravailableOptionalequipmentmayincludeaseparatehoseassemblyforshorteningremovalanda
cleaningbrush. These wouldbe packedwiththe fryers,ifordered.
NOTE: A Parts List for each
Anets Filter System is among the items shipped with each unit. If an
additional copy of this list is needed, please contact the factory as directed on the back cover.
! DANGER
Read these specifications, Code Requirements, Installation Requirements,
Installation Instructions, and Operating Instructions very carefully. Failure to follow the
Instructions could cause the filter system to malfunction. A filter system malfunction can
result in property damage, serious bodily injury, or death.

3 L20-386 R2
INSTALLATION
This Manual will detail the Installation and Operation of the Filter-Mate
system, with notes where the Filtronic II System differs.
BoththeFilterMateandFiltronicIISystemsenabletheusertosafelyandefficientlyfilterthecookingoilor
shorteningfromafryerinabankedrowwhiletheotherfryersinthatrowarestillbeingused. Eventhough
thesetwoFiltrationSystemsareslightlydifferentinphysicaldimensionsanddesign,theInstallationand
Operationisbasicallythesame.
FILTER ELECTRICAL SPECIFICATIONS
Pleasemakesurethatyourdesiredfilterlocationhaselectricalsupplyfactorsthataresuitableforthis product.
Requirementsare 120Volts,60Hz,8Amps,1-phase,three-wireconnection,includingan electrical
ground.
!
ElectricalGroundingInstructions
This appliance is equipped with a three-prong (grounding) plug for
your protection against shock hazard, and should be plugged
directly into a properly grounded, three-prong receptacle. DO NOT
cut or remove the grounding prong from this plug.
FILTER UNIT PREPARATION
(Refer to Photos On Page 4)
1 . Assemble filterenvelopetofilterscreenbyslidingtheenvelopeoverthefilterscreen,folding
backtheopenendover the filterscreen. Makesuretheholeinthefilterenvelopefitsover the
fittingonthefilterscreen.
2 . Assemblefilterenvelopeclipoverfoldedbackendofenvelopeandoverfittingonfilter screen.
3 . Attachknurledretainingnutontofittingonscreen,securingtheassembly.
4 . Attachquick-connectcouplingon draintubetoknurledretainingnut.
5 . Placefilterunitintothefiltertankusingthelift-outhandle.
6 . Connectthefilterassemblytothepumpusingthequick-connectassembly.
7 . Putthefilter tankcoveronthetank.
8 . Slidethefiltertankunitinto itslocationunderthefryersorinthefiltercabinet.
9 . Maketheconnectionfromthefryerreturnlinetothefilterpumpwiththequick-connect fitting.
10 . Plugthecord onthesideofthe filterunitintothe receptacleonthefryerframe.Makesure that
the power switch located on the side or top of filter unit is ON.
W
ARNING !

4 L20-386 R2
FILTER MATE TANK
Filterenvelopeclip
Liftouthandle
Quickconnectcoupling
Knurledretainingnut
Pumpquick-connectcoupling Filter envelope
Returnline andoptionalhose
connection
FILTRONIC II TANK
Pumpquick-connectcoupling
Filter envelope
Filterenvelopeclip
Liftouthandle
Quickconnectcoupling
Knurledretainingnut

5 L20-386 R2
FILTERING INSTRUCTIONS
WARNING
FILTERING
1.Beforefilteringtheshorteninginafryer,turnthethermostatknobto“OFF”ortheGasValveto“PI-
LOT”topreventthefryerfromre-lightingduringfiltering Onsomemodelsthesystemautomatically
preventstheburnersfromlightingwhenthedoorofthefryerisopen.
2.Openthedrainvalve(blackhandle)onthefryertobefiltered,lettingalltheshorteningdrainintothe
filter tank. Leavethisvalveopen.
!
!
Never drain more than one fryer at a time – the filter pan may overflow.
3.Openthereturnlinevalve(yellowhandle)for thefryerbeing filtered. Thisactivates the powertothe
pump. Ifthepumpdoesnotstartimmediatelycheckthattheswitchonthesideortopofthepump
frameis“ON”. Whilethefiltersystemiscycling,usea long-handledcleaningbrushtowipethebottom
ofthefryerandpushexcesscrumbsthroughthedrainandintothefiltermachine.
4.Whentheshorteningreturningintothefryerisclear,closethedrainvalve(blackhandle) andallowthe
fryertorefill.
5.Allowthepumptorununtilnomoreoilisreturningintothevat. Thenclosethereturnlinevalve
(yellowhandle), which de-activates the power tothepump.
CAUTION
Never operate the filter unit unless the cooking oil or shortening in the
fryers has been brought up to cooking temperature.
Alwayswear protectiveheat-resistantgloves whenperforming the filteringoperation.
DANGER
WARNING
When cleaning the inside of the frypot, do not damage the temperature and
hi-limit probes that protrude into the frypot.
W
ARNING
If solid shortening is being used it is very important that all oil is allowed to flow back into
the vat and none is left in the hoses. Failure to do so could cause the pump to fail if the
oil solidifies in the line.

6 L20-386 R2
Note On Using Filter Powder
If filter powder is being used, add 1 cup of powder (for 14” fryers) or 2 cups (for 18” fryers) to
eitherthefry tank orthefiltertank. Ifaddedtofrytank, makesure powderiscompletelyflushed
during fry tank cleaning (Step 3) before closing drain valve (Step 4). If added to filter tank, the
powder will be removed when the filter envelope is changed and the filter tank is cleaned.
6 .Ongas-operatedthermostatmodels(14G,14GS,MXEG,18EG,20EG)thethermostatknobcannow
beturnedbacktothedesiredtemperature. CAUTION: On these models the thermostatmustbe set to
“OFF” orthe Gas Valve to “PILOT”before filtering or the burnersMAYcomebackonifthedoorsare
closedduringfiltering.
7 .Onelectric-operatedthermostatmodels(MX-14E,MX-14AA,18E,18AA, 20E, and14EL-17)the
powerswitchonthecontrolpanel mustbe reset forthefryertooperateagain.
8.The otherfryers inthebankcanbe filtered using the same procedure.
IMPORTANT NOTE:
Thepumponthisfilterunitisequippedwithasafetythatwillturnoffthemotorifitoverheatsoran
electricalfaultoccurs. Ifthisoccurs,letthepump motorcoolfor 15minutes,thenpressthemanual
resetbuttonon the bottom ofthemotorandrestartthemotor.
OIL DISPOSAL
Ifthecookingoilorshorteningfromafryeris tobedisposed,followsteps1and2fromFiltering
Instructionsinprevioussection. Disconnectthelinefromthepumptothefryerreturnline,andconnect
the optionalhoseassemblytothepump. Turnonthepumpusing the manualswitchonthe side ortopof
the filteranddirecttheoilintoanappropriatedevicesuchasanoilshuttletomovetheusedoiltoits
disposal tank.
DANGER
Never run water through the filter system. This will cause rust and corrosion in the
motor and pump and will void the Warrranty.
WARNING
Always wear protective heat-resistant gloves when performing the oil disposal operation.

7 L20-386 R2
REPLACING THE FILTER PAPER
Ifthefilterpaperbecomestorn,orifthetimetofiltertheoilfromoneunitbecomesexcessive,itis timeto
replacetheFilterEnvelope.
1. Disconnecttheoilreturnlinefromthepump.
2. Unplugthe cord fromthereceptacleonthesideofthe cabinet.
3. Pullthefilterunitfromthecabinet.
4. Disconnectthelinefromthe pumptothe filterscreen.
5. OntheFiltronicIImodels,pivotthe motor assembly up out of the way.
6. Removethe filter cover.Use liftouthandle toremove screen assembly. Place onaclean surface for
disassembly.
7. Detachquick-connectcouplingondraintubefromknurledretainingnut.
8. Detachknurledretainingnutfromfittinginscreen.
9. Removefilter envelope clipfrom endoffilterscreenand foldedbackendofenvelope.
10. Removefilterenvelopefromfilterscreen.
11.Cleanthefilterpan,filterscreenandallcomponentsthoroughlyusingasolutionofhotwaterand
detergent. Makesurethatall food and breading particlesareremoved from thepan and from thefilter
screen.
12. Drythe pan,thescreenandall componentscompletely beforestartingtoreassemble.
13. Followinstructionsunder FILTERUNITPREPARATIONtoinstallnewfilterenvelope.
! DANGER !
Make sure the filter pan has cooled completely to room temperature before
attempting to change the paper.
W
A
RNING
The oil soaked filter envelope may still be very hot and could cause burns.

8 L20-386 R2
SYSTEM TROUBLESHOOTING GUIDE
SOLUTION
1 . Make sure the power cord is plugged into the receptacle in the cabinet and the
main power cord from the system is plugged into the appropriate power supply.
2 . Turn the switch on the side of the filter to “ON”.
3 . Close the return line valve (yellow handle) and try opening the return line valve
on another fryer. If the pump starts, the problem is with the micro switch that
contacts the return line valve on the first fryer.
4 . If pump still hasn’t started, depress the thermal overload button on the bottom
of the motor. If the motor is hot to the touch, wait at least 45 minutes before trying
this.
5 . If the pump starts and stops again in a short time, or if it hums but does not
pump, there is a restriction somewhere in the filter screen or in the pump itself.
Go
to Step 6 . If there is no reaction from the pump, go to step 7.
6 . Allow the oil/shortening in the filter pan to cool, then empty the pan and verify
that the filter paper and screen assembly is assembled correctly. Disassemble the
filter screen and look for blockages of sediment or solid shortening within.
7 . Problem is with the motor/pump or the wiring. Remove the motor from the
filter and bench test by connecting a 120V line to the motor leads. If it runs, the
problem is with the wiring between the motor and the power supply. If it does not
run, the motor needs to be replaced.
1. Afteralltheshortening/oilhasbeenpumpedbackintothefryer,inspectthe
filterpaperenvelope. Make surethatany excesssedimentisremovedfromthe
topofthefilterpaperenvelope.
2. Ifthefilterpaperenvelopeisdirtyortorn,disassemblethefilterscreen
assembly. Inspectforblockagesinthelines. Replacewithacleanfilterpaper
envelope.
3. Iftheoilstillreturnstothefryerslowly,theproblemmaybeablockage within
thepumpitself. Thepumpsectionofthemotorcanbeeasilydisassembledto
lookforblockagesofsedimentorsolidshorteningwithin.
1. Makesure the door on the fryer is completely closed.
2. Resetthe ON/OFFswitchonthe fryer by flippingtoOFFpositionand
then backto ON. (Note: Each time the fryer door is opened the ON/OFF
switchneedstobereset.
FILTER
PROBLEM
Pump does not
start when the
returnlinevalve
(yellowhandle)on
the fryer is opened.
Filteringprocedureis
veryslow. Shorten-
ing/oilreturningtothe
fryerveryslow.
Fryersdonotre-fire
afterfiltering.
WARNING
OnlyusefilterpaperenvelopesfromAnetsthathavebeen specificallydesignedfor
thisfiltersystem. Usingthewrongtypeoffilterpaper
cancausedamagetothepumpsystem,andwillvoidthewarranty.

9 L20-386 R2
















































ORIGINAL EQUIPMENT LIMITED WARRANT
Y
General Warranty
Anets, Inc. warrants to the original user of its commercial cooking appliances and related equipment that said appliances and related equipment will be free from
defects in material and workmanship under normal use for a period of one (1) year from the date of installation, with appropriate documentation, to a maximum of
fi fteen (15) months
from the date of manufacture, subject to the following additions, exceptions, exclusions and limitations.
What is covered
This warranty is limited to the repair or replacement at the Company’s option, without charge, of any part found to be defective within the warranty period and
reasonable expenses incurred for freight and material for the installation of such part; in addition, the Company’s obligation shall be limited to reimbursement for normal
labor onsuch parts.
Anets, Inc. agrees to pay the Authorized Service and Parts Distributor, for any labor and material required to repair or replace, at the Company’s option, any part
which
may fail due to defects in material or workmanship during the above general warranty period.
Silver Line Fryers
In addition to the above general warranty, for its economy fryers and cookers, the Company warrants to the original user any mild. Stainless steel fry tank or cooking
vessel to be free from defects for a period of one (1) year,
from the date of installation, with appropriate documentation, to a maximum of fifteen (15) months from the
date of manufacture, subject to the following additions, exceptions, exclusions and limitations.
Labor and freight shall be the responsibility of the end user.
Gold Line Fryers
In addition to the above general warranty, for its standard fryers and cookers, the Company warrants to the original user any stainless steel fry tank or cooking
vessel
to be free from defects for a period of (1) year parts and labor and 10 year frypot or cooking vessel Part only from the date of manufacture Labor and
freight shall be the responsibility of the end user.
Griddles
In addition to the above general warranty, for its griddles, the Company warrants to the original user any griddle
to be free from defects for a period of (1) year parts
and labor only from the date of installation, with appropriate documentation, to a maximum of fifteen (15) months from the date of manufacture.
Pasta Cooker
In addition to the above general warranty, for its standard fryers and cookers, the Company warrants to the original user any stainless steel fry tank or cooking
vessel
to be free from defects for a period of one (1) year parts and labor and 5 years Frypot or cooking vessel part only after year one from the date of
manufacture
. Labor and freight shall be the responsibility of the end user.
Limitations to Fry Tank and Cooking Vessel Warranty
After the expiration of the general warranty period, any additional warranty on fry tanks or cooking vessels shall only obligate the Company to repair or replace, at
its option, any fry tank or cooking vessel which it determines to be defective. Claims under this item shall be supported by a statement detailing the defect, and the
Company
may require the return of the fry tank or cooking vessel claimed to be defective . Labor and freight shall be the responsibility of the end user.
How to Keep Your Warranty in Force
• Make sure any shipping damages are reported immediately . Damages of this nature are the responsibility of the carrier and must be reported by the receiver.
• Install the unit properly
. This is the responsibility of the installer and the procedures are outlined in the manual.
• Do not install it in a home or residence.
• Maintain it properly. This is the responsibility of the user of the appliance and the procedures are outlined in the manual.
• Adjustments, such as calibration, leveling, tightening of fasteners or plumbing or electrical connections normally associated with initial installation. These
procedures are outlined in the manual and are NOT covered by warranty.
•
If it is damaged due to flood, fi re or other acts of God, this is not covered under this warranty.
•
Use it for what it is intended. If it is used for a purpose other than for which it was intended or designed, resulting damages are not covered under the warranty.
• Make sure that it has the correct voltage, gas supply and/or good quality water
. If a failure is due to poor water quality, harsh chemical action, erratic
voltage or gas supplies, these damages are not covered under the warranty.
• Do not materially alter or modify from the condition in which it left the factory.
•
Do not obliterate, remove or alter the serial number rating plate.
• Use only Genuine OEM parts from Anets, Inc . or its Authorized Parts and Service Distributors . Repairs are not covered by the warranty.
•
If any other failure occurs which is not attributable to a defect in materials or workmanship, it is not covered.
This warranty speci fi cally excludes parts which wear or would be replaced under normal usage, including, but not limited to, baskets, tube racks, electric lamps,
fuses, interior or exterior
finishes, o-rings and gaskets.
Limits to the Warranty
Outside the United States of America and Canada, this warranty is limited to the replacement of parts and Anets, Inc. will not bear any other expense be it
labor,
mileage, freight or travel.
If any oral statements have been made regarding the appliance, these statements do not constitute warranties and are not part of the contract of sale. This
limited
warranty constitutes the complete, final and exclusive statement with regard to warranties.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES WHETHER WRITTEN, ORAL OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR WARRANTYAGAINST LATENT DEFECTS.
Limitations of Liability
In the event of a warranty or other claim, the sole obligation of Anets, Inc. will be the repair or replacement, at the Company’s option, of the appliance or the component part. This repair or
replacement will be at the expense of Anets, Inc. except as limited by this warranty statement. Any repair or replacement under this warranty does not constitute an extensionin time to the original
warranty. Parts covered under this warranty will be repaired or replaced, at the Company’s option, with newor functionally operative parts.The liability of Anets, Inc. on any claim of any kind, including
claims based on warranty, express or implied contract, negligence, strict liability or any other legal theories will be exclusively the repair or replacement of the appliance
. This liability will not include,
and the purchaser speci
fi cally renounces any right to recover special, incidental, consequential or other damages of any kind, including, but not limited to, injuries to persons, damage to property, loss
of pro
fi ts or anticipated loss ofthe use of this appliance.
If any provision of this warranty is unenforceable under the law of any jurisdiction, that provision only will be inapplicable there, and the remainder of the warranty will remain unaffected
. The
maximum exclusion or limitation allowed by law will be substituted for the unenforceable provision.
How to Obtain Warranty Service
First direct your claim to the Anets, Inc . Authorized Service and Parts Distributor, www.anets.com/asap.asp closest to you giving complete model, serial and code
numbers, voltage, gas type,
and description of the problem. Proof of the date of installation and/or the sales slip may also be required. If this procedure fails to be
satisfactory, write the National Service Manager,Anets, Inc., P
. O. Box 501, Concord, NH. 03302-0501. USA
This warranty gives you certain speci
fic legal rights; you may have other rights which vary from state to state.
Anets,Inc.,P.O.Box501,Jct.I‐89&I‐93Concord,NH03302‐0501
553Route3A,Bow,NH03304USA
 Tel:(603)225‐6684Fax:(603)228‐5231www.ANETS.com
L14‐
0
22 R
ev
2
,
1
0,
2
0
14

10 L20-386 R2
In the event of problems with or questions
About your order, please contact the Anets
Factory at:
1-603-225-6684 World Wide
Website Address: www.anets.com
MAILING ADDRESS – P.O . BOX 501, CONCORD, NH 03302-0501
SHIPPING ADDRESS – 10 FERRY ST., CONCORD, NH 03301
In the event of problems with or
questions about your equipment, please
contact the Anets Authorized Service and
Parts representative (ASAP) covering
your area, or contact Anets at the number
listed to the left.