Angekis ASP-C-01 User manual

Please refer this ducument before using. Quick start guide(v1.1)|EN
Angekis ASP-C-01
Digital Signal
Processer

Product Overview
部件介绍
This is a high quality audio mixing system, developed for use in lecture halls, meetings
rooms, houses of worship, or any other large space that needs professional audio. It
consists of a Digital Signal Processor main unit with phoenix terminals, 3.5mm and USB
connectivity, as well as two HD voice hanging area microphones. It connects to speakers for
instant amplification and/or a computer or recording device for further audio production.
12
3
4
56
7
8 9
Component introduction
1 Mic 1 volume control knob
2 Mic 2 volume control knob
3 Mic 3 volume control knob
4 Local audio volume control knob
5 Call audio input volume control knob
6 Speaker volume control knob
7 Recorded volume control knob
8 Call audio output volume control knob
9 Indicator LED
10 Mic 1/ Mic 2 interface
11 Headset/handset interface
12 Local audio interface
13 Call audio input interface
14 Speaker interface
15 Recorded interface
16 Call audio output interface
17 3.5 mm Monitor Interface
18 USB interface
19 Power interface
20 Power switch
10 11 12 13 14 15 16 17 18 19 20
1

What'sin the box
2
Digtal Signal Processer 2 x ceiling area microphones Ceiling microphone
cables *2 (20m/pc)
Type B USB cable *1
(1.5m)
Speaker cable *2
(1.5m)
AEC cable *2
(1.5m)
Power adapter Phoenix terminal

Installation
Note:
1. Single-ended signals can only be connected with "+" and "GND", but "-" can not be
connected.
2. Dif ferential signals need to be connected with "+", "GND" and "-"
3. The distance between the microphones should be more than 2
meters.
4. Turn on the power switch after wiring.
PC
USB cable
UC Communication
Ceiling mic1
Ceiling mic 2
mic3 sound console
Speaker Recording box Monitor earphone
Power adapter

Operation
Audio connection method 1 ：
PC
Audio connection method 2 ：
Ceiling mic1
Ceiling mic2 Speaker
Power adapter
USB cable
Power adapter
PC
Ceiling mic1
Ceiling mic 2 Speaker

Local amplification:
Local console usage:
Speaker Power adapter
mic3
Ceiling mic1
Ceiling mic2
Wireless microphone
Speaker
Power adapter
Operation

Right click "Recording" to check whether "Angekis ASP-C-01" is the default
microphone. If not, please click "Angekis ASP-C-01" and and set to default.

Attention
Adjust microphone sensitivity
The sound you hear at the far end may be distorted or too low depending on
how the di f ferent systems interface. If this happens, please adjust the
sensitivity (input volume) of the microphone.
1. Right click the speaker icon at the bottom right of the screen, and then click
"recording device".Display "recording device" interface.
2. Click " A ngekis ASP-C-01”and properties. Display the "Properties"
interface
3. Click the levels tab to adjust microphone sensitivity in the microphone field

Attention
Mac OS
1. Click the apple icon at the top left of the screen, and then click "system
preferences" and "sound". Click”Recording”to check whether “Angekis ASP
-C-01”is the default microphone. If not, please click “Angekis ASP-C-01" and
select set to default.

Attention
2.Click the output and input tabs respectively.To check if you have selected
sound output and input as “Angekis ASP-C-01" from the device field.
If not, click"Angekis ASP-C-01" .
Angekis ASP-C-01
Angekis ASP-C-01