Angelcare AC1100 User manual

INSTRUCTION MANUAL
THE ULTIMATE DIGITAL BABY MONITOR
Video, Movement and Sound
Mode AC1100
AC11000 UK 5.13.2012
with
Touch-Screen

TABLE OF CONTENTS
FREQUENTLY ASKED QUESTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
TIPS TO IMPROVE RECEPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
FCC WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
FEATURES & COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ANGELCARE® MONITOR INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
TESTING YOUR ANGELCARE® MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
MAIN MENU SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
SUB-MENU SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
PROBLEM SOLVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
FACTORY SETTINGS AND TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
• PLEASE READ THESE INSTRUCTIONS AND WARNINGS CAREFULLY PRIOR TO USING THIS PRODUCT.
• THIS PRODUCT IS NOT A TOY KEEP OUT OF CHILD’S REACH AT ALL TIMES
• FOR USE WITH CHILDREN FROM BIRTH AND UP.
WARNING:
• Adult assembly required.
• Keep small parts away from children when assembling.
• TOOLS REQUIRED (NOT INCLUDED):
We, at Angelcare®, stand behind all of our products.
If you are not completely satised or have any questions, please contact your Distributor.
INSTRUCTION MANUAL - MODEL AC1100
3 AAA regular batteries
for Nursery Unit battery
back-up.
Miniature Phillips screwdriver. HARD BOARD
(Plywood, Masonite or Melamin)
Size: 33 cm X 33 cm (13” x 13”)
Thickness: 6 mm (1/4”)
KEEP INSTRUCTIONS FOR FUTURE REFERENCE
2

3
MY MONITOR KEEPS BEEPING/ALARMING AS I SET IT UP...
Your monitor (Nursery Unit) is already pre-programmed to record movement (and sound). This means that as soon as the Nursery Unit receives
mains or battery power, it will start to record movements (whether or not the SensorPad is plugged into the Nursery Unit.) If no movement is
detected the alarm will sound after 15 seconds and will be signalled by one short beep (rouse alarm), and then 5 seconds later, loud beeps in rapid
succession.
To stop the alarm sounding turn o the Nursery Unit (using the Power ON/OFF - left wing), and insert the jack from the SensorPad (if not already
inserted). Turn on the unit and place your hand on the SensorPad and tap lightly (simulating movement from your baby).
If movement is detected, the pendulum in the Parent Unit Settings Bar will ‘swing’ from left to right.
Now remove your hand from the SensorPad and stand still until the pendulum stops swinging after 15 seconds you will hear rst the rouse alarm,
which is a short beep, and then the main alarm will sound.
This shows that your monitor is working properly.
I DON’T WANT TO MONITOR MOVEMENT WHILST MY BABY IS IN THE MOSES BASKET NEXT TO MY BED?
It is easy to change any settings on your monitor, by following the instructions in the manual.
Your Parent Unit is used to remotely transmit any changes you wish to make to your Nursery Unit.
You can reactivate or deactivate movement or sound as your needs change.
Note: If your monitor is set up to record movement, please ensure that the moses basket is not touching your bed as it could be picking up your
movements instead of your baby’s.
WHAT DO THE ALARMS SOUND LIKE?
There is a small loudspeaker on the Nursery Unit which emits this sound. Also the Nursery Unit transmits this sound to the Parent Unit which,
if is turned on will also emit the alarm sound. The Parent Unit can also be set up to vibrate as a means of alarm.
Move ent Alar - single short beep followed by rapid loud beeps
There is a sequence of alarms that you will hear when the monitor is recording movement.
Should the SensorPad not detect movement for 15 seconds, then a ‘Rouse’ alarm will sound. This is a single beep and may wake baby from a deep
sleep. If the SensorPad does not pick up any movement in the 5 seconds following the rouse alarm then the main alarm will sound. This sounds
like a rapid succession of loud beeps that are audible from a distance.
Other Alar s
Low Battery - A low single beep every 15 seconds. Please refer to page 16 Section 2.5.
HOLD Function - A triple beep every 30 seconds whilst HOLD is activated.
Temperature Warning - Four beeps every 5 seconds
I WANT TO TAKE MY MONITOR ON HOLIDAY ABROAD WITH ME. WILL IT WORK?
This is a digital Monitor so transmission in other countries should not be an issue.
If you do experience any diculties, always do the re-connection procedure. (See pg 11).
For short periods of time (2 weeks) you can use mains convertors, however for longer periods please use the appropriate mains adaptor which
can be supplied by the local Angelcare dealer (please visit our website for the International Dealers).
If you only wish to monitor movement, you can use your SensorPad and Nursery Unit on batteries or mains. Note that batteries will not last
for more than a few hours however where a power supply is not available this is an alternative option.
FREQUENTLY ASKED QUESTIONS

4
CAN I USE THE ANGELCARE®MOVEMENT MONITOR IN A TRAVEL COT?
Your SensorPad will give you optimal performance if it is placed on a steady at rigid surface. We recommend 6mm ply cut to 10cm bigger than
the pad. However if you are travelling with a travel cot, that has a soft/hammock base, this base type is too unstable to support your SensorPad.
WHEN I RETURNED HOME WITH MY MONITOR AFTER A TRIP IT LOST CONNECTION. MY VIDEO SCREEN WENT
BLUE AND I COULD ONLY SEE THE BATTERY ICON!
Sometimes your monitor can lose connection if it is moved from one location to another. This can be perfectly normal and does not mean that
your monitor is faulty. To establish connection please refer to Page 17 Section 2.7 Steps 1 to 6 to restore the connection in the Manual.
WHAT MATTRESS CAN I USE THE SENSORPAD WITH?
Your SensorPad can be used under a moses basket mattress, a cot mattress or a cot bed mattress or any other children’s mattress.
The thickness/depth of the mattress does not always aect the performance, however if you have a very thick mattress you may need to adjust the
sensitivity of the SensorPad.
Note: You cannot use the SensorPad with memory foam mattresses which are denser than normal mattresses, nor mattresses with a hollow frame.
IS THE SENSORPAD SAFE TO USE?
The SensorPad and its wire are completely safe to use. They do not carry any current nor radiate any form of energy. The surface area of the
SensorPad merely collects movements and transmits this data to the Nursery Unit.
HOW LONG CAN I USE MY SENSORPAD FOR?
Most parents use the SensorPad until baby is about 14 to 16 months old. Some parents like to monitor their baby for longer. The monitor will work
with older babies but you may experience false alarms as baby stands in the cot or moves away from the SensorPad.
MY BABY WAS VERY PREMATURE - WILL THE MONITOR STILL PICK UP MY BABY’S MOVEMENTS?
Yes your monitor will work even with the tiniest babies. You many need to adjust the sensitivity slightly when baby is very small, or if you have
a small baby in a bigger cot. Please refer to the Adjusting the Sensitivity Section in the Manual.
MY SENSORPAD KEEPS ALARMING...
This can be very normal and shows that the SensorPad is actually working.
So e things that can cause false alar s are:
- Babies breathing patterns do change as they grow and develop. When baby is in a deep sleep the breathing can be very shallow.
- Moving baby to a bigger bed can also cause false alarms since there is a larger surface area .
- When babies get to a certain age they do tend to move around their bed space.
- Thicker mattresses, sleeping bags, babygros and full nappies can make it harder for the SensorPad to pick up movement.
In these instances you may need to adjust slightly the Sensitivity Settings on the Parent Unit. Please refer to Page 15 Section 2.2
SENSOR PAD SENSITIVITY ADJUSTMENT. We have created a Factsheet to give you more information. This can be downloaded from our website.
If you are concerned about your baby’s health in any way, please contact your Health Professional for further advice.
FREQUENTLY ASKED QUESTIONS

5
1. INSTALLATION AND POSITION
•Do not use the Nursery Unit or the Parent Unit if they have been dropped or damaged.
•Your monitor can be used in any crib that is stationary and designed to safely hold a baby. YOU MUST p ace a hard board under the
SensorPad. This support must be at least 13 inches long on all four sides and 1/4 inch thick. Only use your Angelcare®Monitor in a
stationary sleeping environment such as a crib where the SensorPad can rest on a comp ete y at, rm surface, with the printed
side facing up.
•Always place both the Nursery Unit and Parent Unit on a at surface in an upright position and allow for proper ventilation.
•DO NOT place the Nursery Unit or its cord within your child’s reach. Do not put the Nursery Unit inside a crib or playpen.
•The SensorPad works with all baby bed sizes and all mattresses, except memory foam mattresses or mattresses with a hollow frame.
You will need to test your SensorPad after the set-up is completed.
2. VENTILATION
•ALWAYS place both units on a flat surface in the upright position so that air can flow freely around them. Do not cover the Nursery Unit or
Parent Unit with any object such as a blanket. Do not place it in a drawer or in any location which would mue the sound or interfere
with the normal ow of air.
•The SensorPad is made of plastic and does not permit the air to circulate. Therefore, mildew build up could develop underneath the
mattress in the SensorPad area. We suggest rotating the mattress regularly to prevent any mildew.
3. CORD PROTECTION
• STRANGULATION HAZARD. Chi dren have been strang ed by cords. Keep the SensorPad cords and adapter cords out of the reach
of chi dren. Do not use with extension cords.
•Do not use the Nursery Unit if the SensorPad cords, adapter cords or plugs have been damaged.
•Avoid damage to the SensorPad cords and adapter cords. Route cords so that they are not walked on or pinched by items placed upon or
against them.
•Route SensorPad cord only below crib mattress and out of the reach of children.
WARNING
• USE ONLY NIMH AAA RECHARGEABLE BATTERIES. WARRANTY VOID IF ANY OTHER TYPE OF BATTERY IS USED.
• The rechargeab e batteries inc uded with this monitor shou d be rep aced every 2 to 3 months.
• Remove the rechargeab e batteries when the product is stored for ong period of non-use.
• Dispose of exhausted batteries proper y.
BATTERY WARNING
THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.
• Fai ure to fo ow these warnings and the assemb y instructions cou d resu t in serious injury or death.
•This product was designed to aid in the monitoring of your child. When using the monitor, you must still provide the supervision necessary
for the continued safety of your child. Always be sure that both the transmitter and receiver are working properly and are within range of
each other.
• This product is NOT a substitute for direct supervision of your baby. Check your baby’s activities at regular intervals. Monitoring of
premature babies, or those considered to be at risk, should always be carried out under the supervision of a health professional.
• If and when the a arm is triggered by your monitor, you MUST check on your baby.
WARNINGS
IMPORTANT SAFETY INSTRUCTIONS

4. WATER, MOISTURE AND HEAT DAMAGE
•DO NOT use the Angelcare®Monitor if either of the unit or the SensorPad have been exposed to liquids.
•DO NOT immerse any part of the Nursery Unit, Parent Unit, charger, SensorPad, adapters in water or any other liquid. Clean only with a
dry cloth.
•DO NOT place unit near water and moisture. Do not use the Nursery Unit outdoors. Do not use the Nursery Unit near wet areas, such as a
bathtub, shower, wash basin, sink, laundry tub, swimming pool, wet basement, etc.
•Keep Nursery Unit away from heat sources, such as replaces, radiators, stoves or other appliances. Heat can damage the case or
electrical parts.
5. AC POWER SOURCE
•Use only the AC adapters supplied with the Angelcare®Monitor. DO NOT use these adapters with any other equipment.
•When unplugging the AC adapter from the Nursery Unit, be sure it is switched to the o position. If it isn’t, the unit will revert to
battery mode, if batteries are installed.
6. BATTERY
•Charge the batteries for 10 hours prior to rst use.
•Use ONLY AAA rechargeable batteries and/or the AC adapters provided for the Parent Unit.
7. OBJECT IN THE UNITS
•Care should be taken so that objects do not fall onto units.
• DO NOT OPEN the Nursery Unit, Parent Unit, Parents Unit base, SensorPad or adapters. No user-serviceable parts inside.
Risk of electrical shock, re or death.
8. CLEANING AND NON-USE PERIODS
•Disconnect all units before cleaning. DO NOT immerse in water. Use a dry cloth to keep monitor free from dust. DO NOT spray with cleaning
products or solvents. Wipe SensorPad with a cloth moistened very slightly with an antiseptic or mild detergent.
•When not using the monitor for any long period, remove the batteries from both units and disconnect the AC adapters from electrical outlet.
9. VIBRATION AND FALSE ALARMS
•When the monitor is in use, do not use a crib mobile or other crib accessories that may produce vibrations. Other sources of vibrations may
include fans, washing machines, loud music, etc. These sources of vibration may interfere with the performance of your Angelcare®monitor and
the alarm will not sound if it continues to detect any movement other than your baby’s. Be sure all vibration sources are eliminated before
using the monitor.
•You may experience false alarms for several reasons. The most common reason is the Nursery Unit has not been turned o after you have
removed your baby from the crib. Another reason is if the SensorPad has not been placed under the mattress properly.
•The sensitivity level may also need to be adjusted. Refer to the Movement Sensitivity Adjustment section.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
IMPORTANT SAFETY INSTRUCTIONS
6

7
• There is an increase of different products on the arket anufactured with wireless 2.4 GHz technology, which ay cause
interferences with your baby onitor. Install your Angelcare®baby onitor away fro icrowaves, cordless phones, Wi-Fi
technology, co puters and routers (and/or any other si ilar electronic devices), as these devices ay disrupt and/or
di inish the trans ission of the onitor’s signals, alar signals and range.
•The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm (7.9”) from all persons and must
not be located or operating in conjunction with any other antenna or transmitter.
•This monitor uses public airwaves to transmit signals. The Parent Unit may pick up signals or interference from other nursery monitors in
your area. Your monitor may even be picked up by other households. To protect your privacy, make sure both units are turned o when not
in use.
Modications not authorized by the anufacturer ay void users authority to operate this device.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
•Consult the dealer or an experienced technician for help.
This device co plies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference;
(2) This device must accept any interference received, including interference that may cause undesired operation.
TIPS FOR IMPROVING RECEPTION
FCC WARNING

Battery compartment
(only insert 3 'included' AAA
rechargeable batteries - included)
Charger
Night Light
Video camera
Microphone
Power indicator LED (green)
Low battery indicator LED (red)
4 Infrared LEDs for Night Vision
Night Light ON/OFF right wing
POWER On/O left wing
Speaker
Tripod entry and battery
back up compartment
(batteries not included)
Rotating Knob for camera
angle
AC Adapter cable
entry (included)
Charging cradle
AC Adapter cable entry
(included)
LCD touch screen
Microphone
Speaker
POWER On/O
Speaker volume control
Talk-Back button
Belt Clip
Charging cradle back view
Nursery Unit back view
SensorPad cable entry
The Angelcare®Under the
Mattress SensorPad will detect
your baby’s every movement and
trigger an alarm if no movement
is detected for 20 seconds.
Push Button
VERY IMPORTANT! You will need to
place a 6mm (1/4”) thick piece of
plywood measuring 33 cm (13”) X 33
cm (13”). This addition is andatory
to avoid bad contact of the
SensorPad with the attress
that could lead to continuous
false alar s.
FEATURES & COMPONENTS - PARENT UNIT
FEATURES & COMPONENTS - NURSERY UNIT
SENSORPAD
8

9
ANGELCARE®MONITOR INSTALLATION Please refer to SETTING pages for further details
Mattress
1. Remove the mattress from the crib and
place the plywood board between the
crib base and the mattress.


SensorPad
Plywood Board
(not included)
I SensorPad 2 SensorPads
(Available in certain countries only)
2. Position the SensorPad (as shown), in the
center of the crib. Make sure the printed
side faces up. Do not place any bedding
between the mattress and the SensorPad.
Crib center Crib center
1. Remove the belt clip, unscrew the back
panel and insert the 3 AAA NIMH
rechargeable batteries included into
Parent Unit.
2. Connect the AC adapter to the Parent
Unit charger and plug adapter into the
electrical outlet.
Charge for a ini u of 10
continuous hours before using the
onitor for the first ti e.

3. Turn the Parent Unit ON by pushing
and holding the POWER button for 2
seconds.
4. Screen Awill appear and then turn to the
video caption B. When the Nursery Unit is
OFF, screen Cwill appear and the Parent
Unit will automatically shut o after 1
minute. In this case, turn ON the Nursery
Unit and then turn ON the Parent Unit
again.

POWER
On/O

A. INSTALL THE PARENT UNIT

A B C
Crib Base
B. INSTALL SENSORPAD UNDER THE MATTRESS

5. Secure SensorPad and adaptor cords, out
of the child’s reach.
6. Position the Nursery Unit facing the crib.
The Nursery Unit can be installed on any
standard tripod (not included).
7. Use the rotating knob to adjust the angle
of the camera.
1. Unscrew the bottom of the Nursery Unit
and insert 3 AAA regular alkaline
batteries.
2. Connect the AC adapter to Nursery Unit
and plug adapter to an electrical outlet.
3. Connect the SensorPad cord to the
Nursery Unit.
4. Turn the Nursery unit ON by pushing
and holding the left wing for 2
seconds.







C. INSTALL THE NURSERY UNIT AND SECURE ALL CORDS
Secure SensorPad and adaptor
cords, out of the child’s reach.
10
Nursery Unit must be p aced minimum 1m (39”)
away from the crib.
IMPORTANT WARNING: Strangulation Hazard. Children have been STRANGLED by cords. Keep cords more than 1 meter away from
the crib. Securely tie and wrap, out of child’s reach. Do not use with an extension cord.
1 m
(39”)

11
• Test your onitor BEFORE using it for the rst ti e.
• The Angelcare®Monitor can be used with the factory settings or you can odify the in the enu.
• ONLY use rechargeable batteries in the Parent Unit.
Test your Angelcare®monitor BEFORE using it for the first time and then on a regular basis to make sure that it is functioning properly.
The Angelcare®monitor can be used outside of the crib in a different sleeping area. Test your monitor when moving the SensorPad to a
new location to ensure sensitivity is adjusted correctly to the new padding or mattress. Refer to the movement sensitivity adjustment section.
The SensorPad works with all baby bed sizes and all mattresses, except memory foam mattresses or mattresses with a hollow frame.
1. TEST THE SOUND
Make sure the sound mode is ON. Have someone else speak into the Nursery Unit or place a radio near the Nursery Unit. You should hear sound
from the Parent Unit. If there is no sound, refer to the Troubleshooting section.
2. TEST YOUR MONITOR TO DETECT MOVEMENT
Make sure the SensorPad’s cord is plugged into the Nursery Unit then turn both units ON. Make sure the movement function is ON.
Gently move your hand on the mattress. The pendulum symbol will move with your every movement. Remove your hand from the mattress.
Due to the lack of movement, a pre-alarm “Tic” sound will be emitted after 15 seconds and 5 seconds later, the alarm will sound.
3. TEST STOPPING THE ALARM
To stop the alarm, place your hand lightly on the mattress so that the SensorPad starts detecting movement again. The pendulum icon on the
Parent Unit will start moving again, as movement is detected by the SensorPad. You may also press the alarm icon on the Parent Unit, press
the push button on top of the Nursery Unit or shut the Nursery Unit OFF to stop the alarm.
NOTE: If the alarm does not sound, the SensorPad may be detecting a continuous vibration from the floor, a strong draft or the crib being
touched. Avoid contact with the crib when the monitor is in use. Place the crib near a solid supporting wall and away from strong air currents.
The SensorPad sensitivity may need to be reduced, consult the movement sensitivity adjustment section.
4. VERIFYING THE BATTERY MODE
Verify that the battery mode is functional by operating both units without the AC adapters. If the green light on the Nursery Unit does
not light up, the batteries need to be replaced. If the Parent Unit doesn’t light up and the screen does not appear, it needs to be recharged.
TESTING YOUR ANGELCARE®MONITOR

IMPORTANT NOTE: Press the OK icon to conrm a settings
and adjustments done on the MAIN MENU.
When the screen remains idle for 1 minute, it will automatically
return to video display. In such a case, any changes made will not be
saved.
Note: When you are using the MAIN MENU screen, the sound
transmission from the Nursery Unit to the Parent Unit is temporarily
deactivated. Movement detection will remain on if this option was
enabled. To access the MAIN MENU screen - touch the MENU
icon ocated at the bottom right corner of the screen.
UP
DOWN / MUTE
TALK-BACK
Sound transmission from the Nursery Unit can be ON or OFF.
1. Press sound icon to activate or deactivate.
2. Press OK to conrm setting.
• Adjust the sound level with the UP (+) and DOWN (-) buttons.
• Press and hold the DOWN (-) button for at least 2 seconds to
MUTE the sound.
• Press and hold the TALK-BACK button to talk to your baby.
Note: When the sound is on MUTE the icon on the top bar
will appear with a “X”.
SOUND
ICON
Sound ON MUTE
1. MAIN MENU SETTINGS
INSTRUCTIONS
1.1 SOUND
1.2 MOVEMENT
2- Press the top button of the
Nursery Unit.
1- Press the no movement alarm
icon on Parent Unit.
Angelcare® Under the
Mattress SensorPad
MOVEMENT
ICON
Movement detection is provided by the under-the-mattress
SensorPad. This function can be enabled (ON) or disabled (OFF).
1. Press movement icon to activate or deactivate.
2. Press OK to conrm setting.
When enabled, an alarm will be triggered when no movement is
detected for 20 seconds. If you are receiving false alarms, you will
have to adjust the SensorPad sensitivity in the SUB MENU.
NO MOVEMENT ALARM
• Triggered when no movement is detected by SensorPad for 20
seconds.
• Parent Unit and Nursery Unit speakers will emit a loud warning
alarm.
• LCD screen display will show the alarm icon on a black background
instead of the video display.
•Check your baby immediate y.
•To stop the a arm: press the alarm icon on Parent Unit LCD (1)
or press the top button of the Nursery Unit (2) and the alarm will
stop as shown.
12

13
The Tic function is related to the movement SensorPad and is only
available when the movement function is activated. It emits a
sound on the Parent Unit with every movement of the pendulum
telling you that the movement function is on.
1. Push Icon to activate or deactivate.
2. Press OK to conrm.
Pendulum movement will appear on the top bar of the
Parent Unit screen.
TIC
ICON
1.3 TIC
To pause your monitor, press in center of the ‘HOLD’ icon key.
1. When the unit is set into ‘hold’ mode, movement detection and
alarm are disabled.
2. Parent Unit speaker emits 3 consecutive beeps every 30 seconds
as a reminder that the monitor in on ‘HOLD’ mode.
3. Press icon key to return to normal video display.
4. You can also put the unit on HOLD by pushing the top button of
the Nursery Unit for at least 2 seconds and return to normal
operations by pushing it again.
Note: When the Monitor is on HOLD the Nursery Unit night light
blinks.
The video monitor function is activated when you receive your
Angelcare®Monitor. If you wish to disable this function, press the
VIDEO icon then press OK to conrm the setting.
1. The VIDEO icon will appear on the LCD screen when the video
function is OFF.
2. To retrieve the video monitor function, press the MENU icon at
the right bottom of the screen to go into the MAIN MENU, then
press the VIDEO icon.
3. Press the OK to conrm the setting.
MENU icon
VIDEO icon
Night Light
will blink
HOLD
ICON
VIDEO
ICON
1.4 VIDEO
1.5 HOLD

1.6 TEMPERATURE
The baby’s room temperature is always indicated on the top bar of
the screen. By setting the temperature alarm, you will be alerted if
the room temperature is too cold or too hot. If the temperature that
you have set goes out of range, 4 consecutive beeps will be heard
every 4 seconds and the temperature alarm icon will be displayed in
the center of the LCD screen.
Press on the THERMOMETER icon on the MAIN MENU, then press the
“+” and “-” for the temperature settings.
1. Maximum temperature is between: 15 and 32° Celsius / 59 and
90° Fahrenheit.
2. Minimum temperature is between: 5 and 20° Celsius / 41 and
6 ° Fahrenheit.
3. The range between the minimum and maximum temperature is
4° C / 7° F.
An error tone will be heard if you try to set it up below this range.
4. Press key at the left bottom corner of screen to switch the
temperature scale to Fahrenheit or Celsius. The scale you
selected will be indicated above the key.
5. If the temperature alarm is set ON, the word “ON” will appear
above the alarm icon and the thermometer will appear on top of
the video screen bar.
6. Press OK to conrm setting.
Note: If the temperature goes below 0°C (32°F) or over 45°C
(113°F) the top bar will display LO (low) or HI (high) instead of the
room temperature.
TEMPERATURE ALARM
ICON
TEMPERATURE
ICON
To start the TIMER, press the TIMER icon located on the MAIN MENU.
1. The screen will display the baby’s room and the timer.
2. The timer runs from 0:00 (0 hours and 00 minutes) to a
maximum of 5 hours and 59 minutes.
3. After showing “5:59”, it will then stop automatically and
disappear from video display.
Note: When Parent Unit is turned OFF, the timer will
automatically reset and turn OFF.
1.7 TIMER
TIMER ICON TIMER DISPLAY
14

15
2. SUB-MENU SETTINGS
IMPORTANT NOTE: Press the OK icon to conrm a settings
and adjustments done on the SUB-MENU.
When the screen remains idle for 1 minute, it will automatically
return to video display. In such a case, any changes made will not be
saved.
Note: When you are using the SUB-MENU screen, the sound
transmission from the Nursery Unit to the Parent Unit is
temporarily deactivated. Movement detection will remain on if
this option was enabled.
To access the SUB-MENU screen - touch the SUB-MENU icon
ocated at the bottom right corner of the MAIN MENU
screen.
SensorPad sensitivity levels.
When you are using the movement function, you can adjust the
SensorPad sensitivity in the settings menu, if necessary.
1. Press the SUB-MENU icon.
2. Press the SensorPad sensitivity key to the desired level from 1
(lowest) to 5 (highest).
3. Press OK to conrm and return to MAIN MENU.
The Screen Saver mode can be triggered manually by pushing the
Parent Unit POWER key or can be set on automatic mode.
1. Press SUBMENU icon.
2. Press the SCREEN SAVER icon to select the automatic mode.
3. Press “-” or “+” to select 5, 10, 15 or 20 seconds which
represent the delay before it goes in screen saver mode.
You can select OFF which means no delay.
4. Press OK to conrm and return to MAIN MENU.
5. When video is on Screen Saver Mode, the SCREEN SAVER icon
will appear in the middle of the screen. Push the icon to go back
to the camera caption.
Note: Do not push the POWER key for more than 2 seconds since
this will shut down the Parent Unit.
2.2 SENSORPAD SENSITIVITY ADJUSTMENT
POWER key
INSTRUCTIONS
2.1 SCREEN SAVER SETTINGS

1. Press the SUB-MENU icon.
2. Press the ALARM icon.
3. You can select one of the three following alarm modes: Sound
alarm, sound alarm and vibration or vibration only. The symbol
representing your choice will appear on top of the ALARM icon.
4. Press OK to conrm and return to MAIN MENU.
Sound alarm
Sound alarm and vibration
Vibration only
Vox sensitivity levels.
Note: When the “vibration only” mode is selected, the alarm will
not sound on the Parent Unit but it will still sound on the Nursery
Unit. When the Parent Unit is placed in the charging unit, vibration
is disabled and will temporarily change to sound alarm only mode.
During main menu and settings operations, no sound will be
transmitted to the Parent Unit but if the SensorPad detects no
movement, the alarm will sound. The other secondary alarms and
notications are temporarily turned o.
2.3 VOX ADJUSTMENT
2.4 ALARM SET-UP
• Battery capacity icon is always displayed on the LCD screen top bar.
• When battery capacity is low - the Parent Unit will emit a
warning beep every 15 seconds, to indicate that the batteries
need to be recharged.
• Although the batteries at 1/3 capacity will support normal
operations of your monitor, it is highly recommended to fully
recharge the batteries at this stage (A).
• For FULL battery capacity, you must charge the Parent Unit for a
minimum of 10 hours in the Parent Unit cradle.
• While the Parent Unit is recharging, the battery icon will run as
shown on (B).
Low 1/3 full 2/3 full Full
A)
B)
2.5 BATTERY CAPACITY DISPLAY
1. To deactivate the key tone sound, press the KEY TONE icon.
2. Choose ON or OFF.
3. Press OK to conrm and return to the MAIN MENU.
2.6 KEY TONE SETTINGS
16
The Vox function is the sound reception on “voice activated mode”.
The microphone sensitivity can be adjusted as follows: A low Vox
microphone sensitivity means that the sound from the baby’s room
has to be louder to trigger sound transmission to the Parents Unit.
1. Press the SUB-MENU icon.
2. Press on VOX icon to activate or deactivate.
3. Press the microphone sensitivity key to the desired level 1
(lowest) to 4 (highest).
4. Press OK to conrm and return to the MAIN MENU.
Note : If VOX is turned OFF, the sound reception will be continuous.
Press on VOX icon to
activate or deactivate the
Voice activated mode.

17
• The antenna icon, displayed on the LCD screen, indicates the
strength of the link to the Nursery Unit.
• When the link between the Parent Unit and the Nursery Unit is
lost, the OUT OF RANGE alarm icon will be displayed on the
Parent Unit screen.
• On the top bar, the LOST LINK icon will be displayed.
In case the connection between the Nursery Unit and the
Parent Unit is comp ete y ost, you can fo ow these steps to
restore the connection.
1. Make sure the Parent Unit and the Nursery Unit are turned o.
2. Turn the Nursery Unit on.
3. Press and release the left wing 4 times. The night light will
ash.
4. Turn the Parent Unit on. A blue screen will appear with the lost
link icon on the top bar.
5. While pressing the talk-back button on the right side of the
Parent Unit, press and release the power key on the Parent Unit.
6. Video will appear on the Parent Unit’s screen, meaning that the
connection was successfully restored.
Good link
Low link
Lost link Out of range Icon on
LCD screen
Talk-Back Button Power Key
2.7 LINK BETWEEN UNITS
There are 4 built-in infrared LEDs to display a better image on the
Parent unit when there is no sucient lighting in the room. When
the infrared LEDs are in use, the image is shown in black and white
on the Parent Unit screen.
The Vision mode is always on AUTO when you turn the Parent Unit
ON. Press the NIGHT VISION icon to scroll through the 3 available
modes.
4 Infrared LEDs
Camera
1. AUTO: the infrared LEDS are turned on
automatically when the lighting is not
sucient. The image transition takes 20 seconds.
2. ON: The infrared LEDS are ON at all times.
3. OFF: The infrared LEDS are OFF at all times.
The Moon icon appears when the infrared
LEDS are on.
3.1 INFRARED NIGHT VISION
3. ADDITIONAL FUNCTIONS

1. Press the ZOOM icon key in video display to enter ZOOM mode.
2. In ZOOM mode, the video display is enlarged twice the normal
size and the menu icon disappears.
3. Four directions arrows are displayed on the LCD screen. Press on
the direction you wish to see enlarged.
4. To return to the normal video display, press the ZOOM icon again.
ZOOM icon
Direction arrows
Push Button
The Talk-Back button allows you to reassure your baby until you
get to the baby’s room, or to communicate with someone taking
care of the baby.
1. Press and hold the Talk-Back Button to talk
2. Release to stop the communication.
Your Angelcare®Monitor is equipped with a paging system that
allows you to locate the Parent Unit quickly.
1. Press the Push Button on the top of the Nursery Unit for less
than 2 seconds.
2. The Parent Unit will emit a sound for one minute.
3. You can stop the Parent Unit sound by pushing the button on
the Nursery Unit again.
4. IMPORTANT: If you press the Push Button for ore than
2 seconds, you will put the ove ent onitoring on
HOLD. If this should happen, push the button again to
reactivate.
3.2 ZOOM MODE
3.3 PAGER - PARENT UNIT LOCATER
3.4 TALK-BACK BUTTON
Talk-Back button
18

19
FALSE ALARMS
• Turn off the Nursery Unit.
• Verify the connection between the SensorPad and Nursery Unit. Unplug and reconnect the cord.
• Make sure there is no bedding between mattress and SensorPad. You will need to place a 6mm (1/4”) thick plywood Hardboard measuring
33 cm X 33 cm (13” x 13”).
• Make sure SensorPad is positioned as described under the Installation in the Baby’s room section. Sensitivity may need to be adjusted, refer
to the Movement section.
ALARM WILL NOT SOUND
• Avoid contact with the crib when the monitor is ON.
• Place crib near a solid supporting wall to avoid SensorPad from detecting movement from outside crib.
• You may need to decrease the sensitivity, refer to the section Testing your Angelcare®monitor and the Movement section.
NO SOUND IS BEING TRANSMITTED
• Bring Parent Unit closer to Nursery Unit.
• Check/replace batteries or recharge Parent Unit.
• Check connections or change to another electrical outlet.
• Ensure both units are ON.
• Check on the top bar of the Parent Unit to see if the Monitor is on “MUTE” instead of “ON”. Refer to the Sound Section.
NURSERY UNIT POWER ON INDICATOR (GREEN LIGHT) DOES NOT LIGHT UP
• Check connections or change to another electrical outlet.
• Push and hold the left wing for 2 seconds to turn the Nursery Unit ON.
WEAK RECEPTION
• Bring units closer together.
• Change the position of one or both units.
• Place units on a flat surface away from baby’s reach.
• Replace the batteries or recharge Parent Unit.
STATIC, DISTORTION, INTERFERENCES (FROM OTHER MONITORS, WIRELESS PHONES, WALKIE-TALKIES, ETC...)
• Rotate Parent Unit or move it away from source of interference.
FEEDBACK (LOUD NOISES EMITTED FROM THE PARENT UNIT)
• Move units farther apart (at least 3 meters/10 feet apart).
• Decrease volume on Parent Unit.
THE PARENT UNIT SCREEN IS BLACK (PARENT UNIT IS OFF)
• Turn the Parent Unit back ON by pushing and holding the power key for 2 seconds.
• Replace the batteries or recharge Parent Unit.
The Angelcare Baby Monitor is a Personal care Product.
Please DO NOT return it to the store, but contact us initially for advice and assistance:
Angelcare Helpline 0 45 009 17 9; Monday to Friday, 10am-4pm
Website: www.angelcare-uk.co.uk; Email: [e-mail]
PROBLEM SOLVING

Protect the environ ent!
This electronic equipment contains reusable material and must not be disposed with domestic waste. Please take it to a
collecting point for electric and electronic equipment (ask your local authorities for details).
Sound Mode .........................................................................................ON
Movement Mode ..................................................................................ON
Tic .........................................................................................................ON
Camera..................................................................................................ON
Parent Unit speaker volume ..................................................LEVEL 3 OF 6
VOX ......................................................................................................OFF
VOX level (microphone sensitivity) .......................................LEVEL 2 OF 4
SensorPad sensitivity ............................................................LEVEL 3 OF 5
LCD .......................................................................................................ON
Temperature scale.......................................................................... Celsius
Timer ...................................................................................................OFF
Temperature Alarm .............................................................................OFF
High Temperature Alarm ...................................................................30°C
Low Temperature Alarm ....................................................................19°C
Alarm mode ..................................................................Sound alarm only
Night View .........................................................................................Auto
Range: up to 200 m - 656 ft.
Nu ber of Channels: Europe: 64 channels, USA/Canada: 19 channels
Power Supply: Three AAA alkaline batteries (not included) or 7.5V AC adapter for Nursery Unit.
Three AAA rechargeable batteries and 7.5V AC adapter for Charging Base for the Parent Unit.
CAUTION: To reduce the risk of electric shock, do not expose this product to rain or moisture.
Danger of explosion if battery is incorrectly replaced. Batteries included: 3 AAA NIMH rechargeable
batteries, manufactured by GPI INTERNATIONAL LIMITED (GN60AAAHC, 1.2V 600mAh) and by
HIGHPOWER TECHNOLOGY CO., LTD (HFR-44AAAJ600, 1.2V 600mAh). They ay only be replaced
by 3 AAA NIMH rechargeable batteries.
Batteries:
- Do not mix old and new batteries
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, NIMH, etc.) batteries
Trans ission:
Data transmission between the Parent Unit and Nursery Unit is made on the 2.4GHz frequency.
ErP COMPLIANCE
UK – Malta – Cyprus – Singapore
Use only Angelcare®brand power supply - model number T07505B002
EUROPEAN UNION
Use only Angelcare®brand power supply - model number T07505V002
Angelcare®warrants to the original owner of this product that Angelcare®rechargeable video, movement and sound monitor (model AC1100)
is free from any material and workmanship defects, for a period of one (1) year from the date of the original purchase. If this monitoring system
fails to function properly when used as directed under normal conditions within the one-year period, Angelcare®will either repair or replace
the product, at our discretion, free of charge. Please contact your distributor.
The product must be accompanied by a proof of purchase, either a bill of sale or other proof that the monitoring system is within the warranty
period. Angelcare®will bear the cost of repairing or replacing the product and shipping it back to you.
This warranty does not apply to a product which has been da aged as a result of i proper aintenance, an accident, i proper
voltage supply or any other for of isuse. The warranty is also void if the owner repairs or odifies the product in any way.
Angelcare®is not liable for any incidental or consequential da ages with regard to this product. The warranty also excludes any
liability other than what is stated above. No other warranty is given.
LEGAL RIGHTS VARY FROM COUNTRY TO COUNTRY. SOME COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
WE ARE NOT IN ANY WAY RESPONSIBLE FOR ANY OUTCOME RESULTING FROM THE USE OF THIS PRODUCT.
IMPORTANT! This Angelcare®monitor is a personal care product. Please do not return this product to the store. If you have questions or need help,
please call your distributor before returning this product.
LIMITED WARRANTY
FACTORY SETTINGS AND TECHNICAL SPECIFICATIONS
20
Distributor for the UK/Ireland:
Hardenberg&Co Ltd, PO Box 3534, Stone, Staffordshire, ST15 9DT, United Kingdom
Consumer Helpline: 0 45 009 17 9 (Monday to Friday; 10am - 4pm)
Email: [email protected].uk Website: www.angelcare-uk.co.uk