Angelcare AC310 User manual

OWNER’S MANUAL
Model AC310
Baby Video Monitor
WARNINGS ......................................................................................................................................................................................................................2
Setup requirements.................................................................................................................................................................................................................. 3
Charging the Parent Unit (9 hours)...................................................................................................................................................................................... 3
Setting up the Camera............................................................................................................................................................................................................. 4
Turning on your monitor........................................................................................................................................................................................................... 5
Getting to know your monitor................................................................................................................................................................................................. 6
Activating and deactivating additional functions ............................................................................................................................................................ 8
Adding accessories .................................................................................................................................................................................................................13
Troubleshooting........................................................................................................................................................................................................................13
Limited warranty.......................................................................................................................................................................................................................14
Technical specifications ........................................................................................................................................................................................................14
TABLE OF CONTENTS
256AC_10_Manuel_AC310_ROW_m1.indd 1 2018-07-11 4:22 PM

1. THISPRODUCTCANNOTREPLACE RESPONSIBLEADULTSUPERVISION. isproductisdesigned
to aid in the monitoring of your child. When using the monitor, you must still provide the
supervision necessary for the continued safety of your child. Monitoring of premature babies,
or those considered to be at risk, should always be carried out under the supervision of a
health professional. is monitor SHOULD NOT be used as a medical device, nor as a device
to prevent Sudden Infant Death Syndrome (SIDS).
2. When an adapter is plugged into an electrical outlet, DO NOT touch the exposed end.
3. ALWAYS be sure that both the transmitter and receiver are working properly and are
within range of each other. Test the monitor before first use, periodically and when changing
location of the Camera.
4. ALWAYS be sure to immediately check on baby whenever an alarm sounds.
5. DO NOT use monitor near water (such as bath tub, sink, etc.).
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
6. Keep monitor AWAY from heat sources (such as stoves, radiators, etc.).
7. ALWAYS place both the Camera and the Parent Unit on a flat surface in an upright position
and allow for proper ventilation. DO NOT place on sofas, cushions, beds, etc. which may
block ventilation.
8. is monitor uses public airwaves to transmit signals. e Parent Unit may pick up
signals or interference from other nursery monitors in your area. Your monitor may even
be picked up by other households. To protect your privacy, make sure both units are turned
OFF when not in use.
9. is product contains small parts. Adult assembly required. Exercise care when unpacking
and assembling the product and keep small parts away from children.
10. When using the monitor, the room temperature should be between 10°C and 40°C.
BATTERY WARNING
11. The Parent Unit battery is a replaceable Li-Ion battery. Only use the Angelcare
recommended replacement battery. Danger of explosion if the wrong battery is used or
if replaced incorrectly. Refer to your user manual for correct battery installation. DO NOT
short circuit supply terminals. Only use the Angelcare provided power adapter to charge
the battery. Remove the battery from your Parent Unit if product is to be stored for an
extended period of time. Dispose of batteries according to your local ordinances. ALWAYS
keep all batteries away from children.
12. IMPORTANT SAFETY INSTRUCTIONS
12.1 Heed all warnings – All warnings on the product and in the operating instructions
should be adhered to.
12.2 Follow all instructions – All operating and use instructions should be followed.
12.3 Water and moisture - DO NOT use this apparatus near water. For example, near a bath
tub, wash bowl, kitchen sink, laundry tub, in a wet environment or near a swimming pool and
the like. Care should be taken so that objects DO NOT fall onto units and that liquids are not
spilled into either unit or Sensor Pad through its openings.
12.4 Cleaning - Disconnect all units before cleaning. DO NOT immerse in water any part of
the monitor. Clean only with dry cloth.
12.5 Ventilation - DO NOT block any ventilation openings. Allow for proper ventilation when
units are in use. DO NOT cover the Camera or the Parent Unit with any object such as a
blanket. DO NOT place it in a drawer or in any location which would muffle the sound or
interfere with the normal flow of air.
12.6 Heat sources - DO NOT install near any heat sources such as radiators, heat registers,
stoves, TVs or other apparatus (including amplifiers) that produce heat. Heat can damage
the case or electrical parts.
12.7 Power cord protection - Protect the Sensor Pad cord and Adapter’s power
cord from being walked on or pinched by furniture or other items – Power supply
cords should be routed so that they are not likely to be walked on or pinched
by items upon or against them, paying particular attention to cords and plugs,
convenience receptacle, and the point where they exit from the product.
e socket outlet shall be installed near the equipment and shall be easily accessible. Make
sure to plug the adapter to the socket outlet nearest to the equipment and that is easily
accessible. To disconnect from mains, unplug the adapter.
12.8 Accessories - Only use attachments/accessories specified by the manufacturer. DO
NOT place this product on an unstable cart, stand, tripod, bracket or table. e product may
fall, causing serious injury to a child or adult and serious damage to the product. Use ONLY
with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with
the product. Any mounting of the product should follow the manufacturer’s instructions.
12.9 Unplug this appliance during lightning storms or when not used for long periods of time.
12.10 Servicing - DO NOT attempt to service this product yourself as opening or removing
covers (except battery door) may expose you to dangerous voltage or other hazards.
12.11 Replacement parts - When replacement parts are required, be sure the replacement
parts specified by the manufacturer have the same characteristic as the original part.
Unauthorized substitution may result in fire, electric shock or other hazards.
12.12 Usage - is baby monitor is intended as an aid. It is NOT a substitute for responsible
and proper adult supervision and should not be used as such. Use this appliance ONLY for
its intended use as described in this manual.
12.13 Power Sources - Operate this product only from the type of power source indicated
on the type plate of the adaptor. If you are unsure of the type of power supply to your home,
consult your dealer or local power company.
12.14 Overloading - DO NOT overload wall outlets, extension cords or integral convenience
receptacles as this can result in a risk of fire or electric shock.
12.15 Object and Liquid Entry - NEVER push objects of any kind into this product through
casing slots as they may touch dangerous voltage points or short out parts that could result
in a risk of fire or electric shock. NEVER spill liquid of any kind on the product.
12.16 Antenna - e antenna used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be collocated or
operating in conjunction with any other antenna or transmitter.
12.17 Power Lines - An outside antenna system should NOT be located in the vicinity of
overhead power lines or other electric light or power circuit, or where it can fall into such
power lines or circuits as contact with them may be fatal.
12.18 Vibration Source - When the monitor is in use, DO NOT use a bedside crib, cot mobile
or other cot accessories that may produce vibrations. Other sources of vibrations may
include fans, washing machines, loud music, etc. ese sources of vibration may interfere
with the performance of your Angelcare®monitor and the alarm will not sound if it continues
to detect any movement other than your baby’s. Be sure all vibration sources are eliminated
before using the monitor.
12.19 You may experience false alarms for several reasons. e most common reason
OWNER’S MANUAL
KEEP YOUR OWNER’S MANUAL FOR FUTURE REFERENCE.
PLEASE READ THE WARNINGS AND INSTRUCTIONS CAREFULLY
BEFORE ASSEMBLING & USING THE PRODUCT.
FAILURE TO FOLLOW THE WARNINGS AND THE INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH OR DAMAGES TO
THE PRODUCT.
WARNING
Adult assembly required.
Keep small parts away from children when assembling.
We, at Angelcare®, stand behind all of our products.
If you are not completely satisfied or have any questions,
United States and Canada: Please contact us at:
[e-mail]
Other countries: Please contact your local distributor:
international.angelcarebaby.com
WARNINGS
WARNING
- Strangulation Hazard –
Children have STRANGLED in cords.
• KEEP the Camera Unit and adaptor cords out of the reach of children
more than 3 feet or 1 metre away. • NEVER use extension cords with
adaptors. ONLY use adaptors provided. • is product is NOT a Toy.
NEVER allow children to play with it.
2
256AC_10_Manuel_AC310_ROW_m1.indd 2 2018-07-11 4:22 PM

is the Camera has not been turned OFF after you have removed your baby from the cot.
Another reason is the Sensor Pad has not been placed under the mattress properly.
Be sure the Sensor Pad is on a flat, firm surface with the Angelcare®logo side facing up.
e sensitivity level may also need to be adjusted. Refer to Step 5.1. Always be sure to
immediately check on baby whenever an alarm sounds.
12.20 Sensor Pad - Your Sensor Pad can be used in any cot that is stationary. If the cot has a
spring or slat base, place a hard board between the cot base and the Sensor Pad measuring
at least 33 x 33 cm and 6 mm thick. Only use your Angelcare®monitor in a stationary sleeping
environment such as a cot where the Sensor Pad can rest on a completely flat, firm surface.
The Sensor Pad is made of plastic and does not permit the air to circulate.
Therefore, mildew build up could develop underneath the mattress in the Sensor
Pad area. We suggest rotating the mattress regularly to prevent any mildew.
13. IMPORTANT SAFETY INSTRUCTIONS RELATED TO USE OF BATTERIES
13.1 Use ONLY the type and size of battery specified in the owner’s manual. ere is a risk
of explosion if battery is replaced with an incorrect type.
13.2 Charge the battery for 9 hours prior to first use. Be sure to have the monitor in the OFF
position during this period. ONLY use the adapters included with your monitor.
13.3 DO NOT use these adapters with any other equipments.
13.4 When unplugging the adapter from the Camera, be sure it is switched to the OFFposition.
13.5 DO NOT dispose of batteries in fire. ey may explode. Check with local regulations for
possible special disposal instructions.
13.6 Exercise care in handling batteries in order not to short out the batteries with
conducting materials such as rings, bracelets and keys. Overcharging, short circuiting,
reverse charging, mutilation, or incineration of batteries must be avoided to prevent one
or more of the following occurrences: release of toxic materials, release of hydrogen and/
or oxygen, gas and rise in surface temperature.
13.7 DO NOT attempt to rejuvenate the battery provided with or identified for use with this
product by heating them. Sudden release of battery electrolyte may occur, causing burns
or irritation to eyes or skin.
13.8 If and when necessary, the battery must be replaced with identical new ones or
equivalent (volts and size).
13.9 Remove the battery from the Parent Unit if you store the product over 30 days because
the battery could leak and damage the product.
13.10 Discard ‘dead’ batteries as soon as possible since ‘dead’ batteries are more likely
to leak in a product. If a battery has leaked or vented, it should be replaced immediately
using protective gloves.
13.11 DO NOT store this product, or the battery provided with or identified for use with this
product, in high-temperature areas.
Model AC310
Baby Video Monitor
SETUP REQUIREMENTS
INCLUDED:
Touch control Parent Unit Camera Unit
Tabletop stand with
removable wall mount
metal ball
(for Camera Unit)
Hardware
(Screwdriver required
for wall mounting)
Lithium ion battery pack
(for Parent Unit)
2x AC adapter
(for Parent Unit and Camera Unit)
STEP 1  CHARGING THE PARENT UNIT 9 HOURS
VOLUME
+
-
AC410/AC417
08/04/2016
1
2
Battery compartment lock
Rear View
1) Unlock the battery compartment on the
rear and remove the cover. Insert the
provided rechargeable battery into the
compartment. Contacts of the battery
and the contacts in the compartment
must be aligned.
2) Connect the USB plug to the Parent Unit
and connect the power adapter with an
electrical outlet.
3) Charge the unit for 9 continuous hours
prior to first use.
3
E
N
256AC_10_Manuel_AC310_ROW_m1.indd 3 2018-07-11 4:22 PM

PARENT UNIT:
VOLUME
+
-
AC410/AC417
PU
08/04/2016
Front Side Rear Side
Micro USB charging port
(on the side)
Folding stand
(on rear)
Rechargeable battery
compartment
Navigate back
Microphone
Main Menu
Confirm Selection
Navigate Up
Navigate Down
Power
On/Off
Microphone
Visual sound
indicator
Power indicator Volume control +/-
(on the side)
WARNING
- Strangulation Hazard –
Children have STRANGLED in cords.
• KEEP the Camera Unit and adaptor cords out of the reach of children
more than 3 feet or 1 metre away. • NEVER use extension cords with
adaptors. ONLY use adaptors provided. • is product is NOT a Toy.
NEVER allow children to play with it.
STEP 2  SETTING UP THE CAMERA
Camera can be installed on the wall (see included parts) or using the tabletop stand. Depending on the position you choose,
you’ll need to remove the metal ball from the stand to wall mount camera.
Place the
Camera at least
1 metre from the
cot
2
1) Place the Camera at a minimum of 1 metre away from
the cot.
2) Connect the adapter to the Camera and into an electrical
outlet.
3) Adjust the Camera using the magnetic mount to get the
best view of baby in the cot.
4
256AC_10_Manuel_AC310_ROW_m1.indd 4 2018-07-11 4:22 PM

Note: Each time you power ON your Camera, the internal thermometer will need to calibrate to ensure accuracy.
is automatic process will take approximately 30 minutes. e colour changing temperature display, by default,
will be turned “OFF”. You may turn this feature “ON” in the settings mode on your Parent Unit.
CAMERA
Front Side
Speaker
Microphone
Camera
Room
temperature
display
Micro USB
charging port Rear Side
Magnet for
tabletop stand
and wall mount
POWER ON/OFF
Pairing button
STEP 3  TURNING ON YOUR MONITOR
Your Camera and Parent Unit come pre-paired.
1
ON
OFF
1) Slide the Camera ON/OFF switch to the ON position.
2
2) Press and hold the Parent Unit ON/OFF button for
2 seconds until LCD screen is turned ON. Angelcare’s logo will be
shown for 1 second.
e Camera connection signal strength icon will appear
in the status bar.
When Parent Unit is turned ON and Camera is OFF, Parent Unit will display
Out-of-Range icon.
If there is a lost connection between the two units after 15 seconds, the Out-of-Range alarm will sound on
the Parent Unit (refer to Troubleshooting section):
• e Out-of-Range icon will appear on the screen and on the info bar.
5
E
N
256AC_10_Manuel_AC310_ROW_m1.indd 5 2018-07-11 4:22 PM

INFO BAR IMPORTANT ICONS
Temperature
alerts icons
Too Cold
Too Warm
Reception
Quality icons
Out-of-Range
Volume Level
icons
Battery Level
indicators
Fully charged battery (only
appears when Parent Unit
is plugged in
VOX icon
Camera
displaying
image and
sound
3.1  HOW TO SET THE DATE
When activating the Parent Unit for the first time, you’ll be asked to set the date and time in order to record
temperature data. If you choose to skip this step, you can always go back later by accessing the settings menu
.
/
12 31 2016
/
31/12/201612/31/2016
02:04 18°C
2
31
4
1) Press to switch between Month/Day/Year and Day/Month/
Year display.
2) Press the down arrow once and then to set the date.
3) Set the day with the up/down arrows and confirm with .
Do the same for the month and year and confirm with .
4) Press the down arrow , the Save icon at the bottom is
highlighted in blue then Press the button to save the settings.
3.2  HOW TO SET THE TIME
02:04 18°C
02 04
2
31
4
1) Press to switch between 12 h and 24 h mode.
2) Press the down arrow once and then to set the time.
3) Set the hours with the up/down arrows and confirm with
. Do the same for the minutes and am/pm display and confirm
with .
4) Press the down arrow , the Save icon at the bottom is
highlighted in blue then Press the button to save the settings.
STEP 4  GETTING TO KNOW YOUR MONITOR
TOUCH CONTROL KEYS
Access to the different
operation settings
Navigate the different
functions
Exit or to go back to main menu when
in sub-menu
Confirm a selection or setting and allows
you to access to a quick menu
6
256AC_10_Manuel_AC310_ROW_m1.indd 6 2018-07-11 4:22 PM

e Angelcare®monitor can be used with the pre-programmed factory settings or you can also customize your
settings to your preference.
18°C
Temperature Reports
General Settings
Camera Settings
Temperature Settings
Pairing Units
18°C
Adjust LCD
Brightness
Pan & Zoom
Active Camera
Indicator
IMPORTANT
When in menu or sub-menu modes, sound transmission between the Parent Unit and the Camera will be
temporarily deactivated.
4.1  SOUND
TO ADJUST/MUTE SOUND:
Press the Volume up /
Volume down button to
adjust the sound level.
To mute the sound level
press the Volume down
button until the mute
symbol is displayed.
4.2  BATTERY
HOW TO CHECK THE BATTERY:
Unplug the adapter from the Parent
Unit and check the battery level
indicator.
1/4 full 1/2 full 3/4 full full
HOW TO CHARGE THE BATTERY IN THE PARENT UNIT:
Leave the Parent Unit plugged in to fully
charge the unit. Although the battery
at 1/4 capacity works normally,
we recommend that you fully recharge it.
PARENT UNIT BATTERY ALERT
• Alert activates when the battery needs to be recharged.
• Parent Unit will emit a beep sound every 30 seconds.
• Battery Alert icon will show on LCD screen.
YOU ARE NOW READY TO USE YOUR MONITOR
DEFAULT SETTINGS
Parent Unit Volume: Level 3 (of 4)
Camera Speaker Volume: Level 3 (of 4)
Temperature Unit: Celsius
Temperature Alert: OFF
Camera Temperature Indicator: ON
Camera Colour Changing Mode: OFF (White color)
7
E
N
256AC_10_Manuel_AC310_ROW_m1.indd 7 2018-07-11 4:22 PM

Temperature Monitoring: OFF
Voice Activation (VOX): ON
VOX Sensitivity: Level 2 (of 4)
Screen Saver Timer: 30 seconds
LCD Brightness: Level 3 (of 5)
STEP 5  ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS
5.1  TWO WAY TALK
Your Parent Unit is equipped with Two Way Talk. is feature allows you to talk to baby without being in
the nursery.
TO ACTIVATE TWO WAY TALK:
02:04 18°C
Press the Microphone button to activate/deactivate the
Two Way Talk.
e Microphone icon appears in the Screen when the
microphone is active.
5.2  VOICE ACTIVATION VOX OR CONTINUOUS SOUND MODE
Allows you to select your option on how your monitor sound. Your monitor is preset to ‘Sound Activated’ (VOX ON).
is means that it will transmit sounds only when it detects them, based on the setting of the sensitivity level. To
save power, after 10 seconds, the sound transmission will stop if no sound is detected. Once sound is detected
transmission will automatically activate.
Or, you can switch to ‘Continuous Sound’ (VOX OFF). e sound monitoring is continuously ON, picking up all
sounds.
NOTE:
By deactivating VOX, Continuous Sound setting will turn ON.
TO ACTIVATE/DEACTIVATE VOX:
02:04 18°C
2
1) In the Camera settings, press the down arrow to the VOX toggle
and press to activate/deactivate the VOX function.
2) Press the down arrow until the Save icon at the bottom is
highlighted in blue then Press the button to save the settings.
TO ADJUST THE CAMERA SPEAKER VOLUME:
02:04 18°C
2
1) In the Camera settings, adjust the Camera speaker volume level
with the up/down arrows and confirm by pressing .
2) Press the down arrow until the Save icon at the bottom is
highlighted in blue then Press the button to save the settings.
8
256AC_10_Manuel_AC310_ROW_m1.indd 8 2018-07-11 4:22 PM

TO ADJUST THE SOUND SENSITIVITY VOX:
02:04 18°C
2
1) In the Camera settings, adjust the microphone sensitivity level with
the up/down arrows and confirm by pressing .
2) Press the down arrow until the Save icon at the bottom is
highlighted in blue then Press the button to save the settings.
5.3  ROOM TEMPERATURE DISPLAY
TO ACTIVATE THE ROOM TEMPERATURE ALERT:
18°C
1) In the temperature settings menu, select the alarm settings by pressing
.
17 30
18°C
3
2) Press to switch the temperature alarm ON/OFF.
3) Press the down arrow until the Save icon at the bottom is
highlighted in blue then Press the button to save the settings.
TO SET THE ROOM TEMPERATURE RANGE:
18°C
1) In the temperature settings menu, select the alarm settings by pressing
.
17 30
18°C
2
1) Set the lower temperature limit with the up/down arrows and
confirm with . Do the same for the upper limit and confirm with
.
2) Press the down arrow , the Save icon at the bottom is highlighted
in blue then Press the button to save the settings.
TO ACTIVATE/DEACTIVATE THE CAMERA TEMPERATURE DISPLAY AND COLOR CHANGING MODE:
Allows you to set the LCD display on your Camera. You can completely turn OFF the display, or set the color
temperature color display on the Camera. With this option the Camera digits light up in colour when the
temperature goes above or below your preferences. e Camera LCD will turn to red if temperature is too hot, blue
if too cold and white if correct.
9
E
N
256AC_10_Manuel_AC310_ROW_m1.indd 9 2018-07-11 4:22 PM

18°C
1) In the temperature settings menu, select the Camera LCD display
setting menu.
18°C
3
2) Press to turn the LCD display mode activate/deactivate then
press the down arrow once and then to turn the colour
changing mode activate/deactivate.
3) Press the down arrow , the Save icon at the bottom is
highlighted in blue then Press the button to save the settings.
TO CHANGE BETWEEN CELSIUS AND FAHRENHEIT:
18°C
1) In the temperature settings menu, select the temperature unit
setting.
°C °F
02:04 18°C
3
2) Press to switch between °C and °F.
3) Press the down arrow until the Save icon at the bottom is
highlighted in blue then Press the button to save the settings.
TEMPERATURE ALERT
• Alert activates when temperature reaches maximum or minimum set
temperature.
• Parent Unit will emit 4 consecutive beeps, every 5 seconds.
• Temperature Alert icon will show on LCD screen.
5.4  SCREEN SAVER
02:04
02:04 18°C
1) In the general settings menu, select the screen saver settings
menu.
00:00:30 00:01:00 00:02:00 00:03:00
02:04 18°C
4
2) Press to switch the screen saver ON or OFF.
3) Press the down arrow once and then to set the time after
the screen saver will be activated.
Select between 30 seconds to 3 minutes.
4) Press the down arrow , the Save icon at the bottom is
highlighted in blue then Press the button to save the settings.
10
256AC_10_Manuel_AC310_ROW_m1.indd 10 2018-07-11 4:22 PM

MANUAL SETTING:
To manually activate the Screen Saver Mode, quickly press & release the Parent Unit POWER ON/OFF button.
NOTE:
e LCD screen will turn black when video is in Screen Saver mode. Press any button to return to
Video mode.
5.5  TEMPERATURE MONITORING
Room temperature tracking gives you insight into your little ones sleep pattern. ree times every hour the system
compiles the collected data and a report can be viewed on the Parent Unit.
TO ACTIVATE OR DEACTIVATE TEMPERATURE MONITORING:
IMPORTANT
In order to record the temperature data, ensure you have set the date and time in
STEPS 3.1 and 3.2.
e graphing function is not available during the first 20 minutes of use as the system is collecting the first set
of data that will be displayed. During this time, the graphing icon will not be operational.
02:04
02:04 18°C
1) In the general settings menu, select the monitoring settings.
02:04 18°C
3
2) Press OK to select monitoring ON or OFF toggle.
3) Press the down arrow , the Save icon at the bottom is highlighted
in blue then Press the button to save the settings.
DELETE GRAPHING DATA:
is option will not be available until 20 minutes from activation of this function.
02:04
02:04 18°C
1) In the general settings menu, select the graph delete menu.
02:04 18°C
3
2) Press the down arrow and then to delete previously saved
graph data.
3) Press the down arrow , the Save icon at the bottom is highlighted
in blue. Press button again to confirm delete. Otherwise press the
arrow back to cancel.
11
E
N
256AC_10_Manuel_AC310_ROW_m1.indd 11 2018-07-11 4:22 PM

NAVIGATING TEMPERATURE REPORTS:
18°C
1) In the temperature reports, press to highlight/select the first set of
arrows. Use the up/down arrows to navigate page by page.
18 20 20 19 22 23 20 18 17
18°C
4
2) Press to highlight/select the second set of arrows (double
arrows). Use the up/down arrows to navigate day by day.
3) Press to deselect the arrows.
4) Press the arrow back to go back to the Menu.
Temperature indicator: The blue bar indicates the temperature in the room.
Navigation Icons:
Graphing Icons:
Indicates an alert during the period Indicates the system was turned OFF during the period
MONITORING IMPORTANT BUTTONS AND ICONS
Go to previous page Go to next page Go to previous day Go to next day
5.6  DIGITAL PAN AND ZOOM
18°C
1) Select the zoom function.
2) Press to activate the zoom.
02:04 18°C
43) Use the up/down arrows to zoom in on what you want to see
more closely. Press to switch between vertical and horizontal
movement.
4) Press the arrow back to switch back to normal viewing mode.
Zoom is deactivated.
5.7  LCD SCREEN BRIGHTNESS
18°C
21) Select the brightness control and Press .
2) Use the up/down arrows to decrease / increase the brightness
level.
12
256AC_10_Manuel_AC310_ROW_m1.indd 12 2018-07-11 4:22 PM

STEP 6  ADDING ACCESSORIES
Your Angelcare monitor allows you to add additional Cameras or a Wired Sensor Pad. Please contact your local
distributor to check availability in your country.
IMPORTANT
• If you have a Sensor Pad connected to your Angelcare Monitor, it can ONLY be paired with Camera 1. e
alarm on the Parent Unit will only sound if Camera 1 is selected or in split view. If another Camera is
selected only the Camera 1 will sound the alarm.
• You will only be able to hear audio from one camera at a time. When in split screen, the sound transmitted
from the Parent Unit will be from the Camera number highlighted in the info bar.
TROUBLESHOOTING
TAKING CARE OF YOUR RECHARGEABLE BATTERY
• Ensure that you fully charge your battery for 9 hours before its first use.
• To maintain maximum battery life it is recommended that you fully discharge your battery periodically.
If your Parent Unit is not in use, please turn it OFF.
LOSS OF CONNECTIVITY
• If your Camera becomes un-paired from your Parent Unit, please follow the steps below to re-pair them.
18°C
1) Select the pairing settings menu and then
to access it.
2) Press the down arrow once and press to select/highlight
CAMERA (the Edit icon will turn to blue). Press to delete the
paired camera as the Trash icon appears, and then Press
to confirm. e +icon will appear, then Press to re-pair the
camera.
e Parent Unit Power Indicator will
flash to indicate it’s in linking mode.
18°C
3
6
3) Plug in and turn your Camera ON.
4) Press and hold the Pause / Pairing button on the top right of the
Camera for 2-3 seconds.
5) When the Trash can icon shows up, the Camera
is now paired.
NO SOUND IS BEING TRANSMITTED
• Check the volume level on the Parent Unit and the Camera to ensure they are set to an appropriate level.
• Try bringing the Parent Unit closer to the Camera to see if you can hear sound.
• Charge the Parent Unit.
WEAK RECEPTION
• Bring units closer together.
• Change the position of one or both units.
• Place units on a flat surface away from baby’s reach.
• Recharge the Parent Unit.
13
E
N
256AC_10_Manuel_AC310_ROW_m1.indd 13 2018-07-11 4:22 PM

TECHNICAL SPECIFICATIONS
Range:
Open field (Open area without obstructions):
up to 250 metres.
Number of Channels:
USA/Canada: 24 channels.
Europe: 24 channels.
Power Supply:
1 included rechargeable Li-Ion battery (Parent Unit)
100 - 240 VAC / 5 VDC adapter for the Parent Unit
100 - 240 VAC / 5 VDC adapter for the Camera
Caution: To reduce the risk of electric shock, do not expose this product
to rain or moisture.
Danger of explosion if batteries are incorrectly replaced. e battery included for the Parent
Unit is a user replaceable Li-ion rechargeable battery, manufactured by manufatured by Icon
Energy System (Shenzhen) Co Ltd. Only use the Angelcare recommended replacement battery.
To obtain information on replacement batteries please contact Angelcare customer service:
www.angelcarebaby.com or contact your local distributor. Instructions will be included with
the replacement battery. Keep all batteries away from children.
Batteries:
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Transmission:
Transmission between the Parent Unit and the
Camera is made on 2.4 GHz frequency for Europe/
Asia/Africa/Australia.
Asia/Africa/Australia
Maximum RF Power Transmitted:
• 20dBm (100mW) between Camera and Parent Unit
Hereby, Angelcare Monitors Inc., declares that this Baby Monitor is in compliance with Directive
2014/53/EU e full text of the EU declaration
of conformity is available at the following internet address:
www.angelcarebaby.com/customer-support/product-registration
LIMITED WARRANTY
Angelcare®warrants to the original owner of this product that Angelcare®monitor is free from any
material and workmanship defects for the term of the warranty period (see warranty table below to
determine the warranty for your country). If this monitoring system fails to function properly when
used as directed under normal conditions and during the warranty period, Angelcare®will either
repair or replace the product, at our discretion, free of charge. Please contact your local distributor
to validate warranty and warranty period.
e product must be accompanied by a proof of purchase, either a bill of sale or other proof
that the monitoring system is within the warranty period. Angelcare®will bear the cost of
repairing or replacing the product and shipping it back to you.
is warranty does not apply to a product which has been damaged as a result of
improper maintenance, an accident, improper voltage supply or any other form of
misuse. e warranty is also void if the owner repairs or modifies the product in
any way. Angelcare®is not liable for any incidental or consequential damages with
regard to this product. e warranty also excludes any liability other than what is
stated above. No other warranty is given.
is warranty does not cover products and accessories which are not Angelcare-branded,
or any problems that result from usage that is not in accordance with product instructions,
failure to follow the product instructions, or problems caused by using accessories, parts or
components not supplied by Angelcare.
LEGAL RIGHTS VARY FROM COUNTRY TO COUNTRY. SOME COUNTRIES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY
NOT APPLY TO YOU.
WE ARE NOT IN ANY WAY RESPONSIBLE FOR ANY OUTCOME RESULTING FROM THE USE OF THIS
PRODUCT.
IMPORTANT! is Angelcare®monitor is a personal care product. Please do not return this
product to the store. If you have questions or need help, please call your distributor before
returning this product: international.angelcarebaby.com
WARRANTY TERM PER COUNTRY
North America 1 year
UK, South Africa, Russia 1 year
Other countries 2 years
PROTECT THE ENVIRONMENT
e wheelie bin symbols mean that according to local laws and regulations your product
and/or its battery shall be disposed of separately from household waste. When the
product/battery reaches its end of life take it to a collection point designated by local
authorities. e seperate disposal and recycling will help conserve natural resources and
protect human health and the environment. Refer to User’s Guide for removal of batteries.
STATIC, DISTORTION, INTERFERENCES
FROM OTHER MONITORS, WIRELESS PHONES, WALKIETALKIES, ETC.
• Rotate Parent Unit or move it away from source of interference.
FEEDBACK LOUD NOISES EMITTED FROM THE PARENT UNIT
• Move units farther apart (at least 3 metres).
• Decrease volume on Parent Unit.
THE PARENT UNIT SCREEN IS BLACK PARENT UNIT IS OFF
• Turn the Parent Unit back ON by pushing and holding the POWER ON/OFF button for 2 seconds.
• Recharge the Parent Unit.
THE PARENT UNIT DOESN’T SHOW TEMPERATURE REPORTS
• Make sure the time and date is set up. Refers to STEP 3.1 & 3.2.
• Make sure the temperature monitoring is activated. Refers to STEP 5.5.
ErP COMPLIANCE
USE ONLY THE FOLLOWING ANGELCARE®BRAND POWER SUPPLY MODEL NUMBERS:
EU (INCLUDIG GERMANY) – MODEL NUMBER: K05S050100G
UK – MODEL NUMBER: K05S050100B
14
256AC_10_Manuel_AC310_ROW_m1.indd 14 2018-07-11 4:22 PM

15
E
N
256AC_10_Manuel_AC310_ROW_m1.indd 15 2018-07-11 4:22 PM

IM310-ROW-11072018
www.angelcarebaby.com
256AC_10_Manuel_AC310_ROW_m1.indd 16 2018-07-11 4:22 PM