TROUBLESHOOTING
CAUTION: Unplug the device before handling.
If the unit fails to light:
Check the power supply using another electrical device.
Check if night sensor is exposed to light source.
Ensure the light cord plug socket is properly seated and tight to the transformer.
Ensure the bulb is properly seated into the socket.
Note: A bulb replacement may be necessary.
CLEANING AND MAINTENANCE
When a reduction in light performance is noted, the need for cleaning is the most common
reason. Cleaning intervals depend on your pond environment.
The halogen bulbs are easily replaceable, and we suggest doing this seasonally.
The bulbs are a standard item (MR11) available at various retailers, as well as through our
website.
The clear and coloured lenses must be kept clean using a mild soap and soft brush.
Check the night sensor regularly for obstructions or build up or debris.
IF MOISTURE IS NOTICED UNDER THE LENS, disassemble the unit, allow to dry,
and reassembly properly to insure the protective ring makes a complete seal.
We recommend inspecting the unit annually for any damage to the cord or electrical
supply. UNIT MUST BE PROPERLY STORED FOR WINTER.
LIMITED WARRANTY
This item is warranted to the original user against defective materials and workmanship
for a period of 90 days. Warranty does not cover replaceable materials such as light
bulbs or coloured lenses. Our limited warranty does not cover any costs associated with
the installation or removal of products subject to warranty claims or the cost of return of
the item. The warranty will commence from the date of purchase. Replacement liability
is limited to any part or parts of the unit which have failed due to defective material or
workmanship. Proof of purchase is required for all claims against the limited warranty.
This warranty does not extend to damage of the product or part resulting from accident,
misuse, alteration, negle
ct, abuse, improper installation or normal wear and tear to the product(s). This limited
warranty extends only to the original user of the product.
3 x 10 Watt Halogen Spotlights
COMPONENTS
1. Lights with swivel base,
seal, protective ring, light
cord with plug socket and
cap.
2. CUL Transformer with
Grounded Power Plug.
3. Interchangeable coloured
lenses - (4 Each - red,
green, yellow, blue)
4. Light sensor.
5. Replacement 10W Bulb X
3 (MR11)
INTENDED USE:
These spotlights are primarily intended for use fully submersed in a pond, fountain,
or water feature. They are designed for fresh water use only. They can be used above the
water surface, however should be located away from ANY flammable materials and
monitored closely as they generate heat. Included interchangeable coloured lenses create
additional effect in your pond. The sensor turns the unit on automatically at night for added
convenience.
The transformer and night sensor MUST NOT BE SUBMERSED in water.
The lights can be located up to three feet apart and have 5 angle adjustments.
QUESTIONS? REPLACEMENT PARTS?
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
Visit our website (www.angelodecor.com) for more information and videos on how to
assemble and properly use your product.
For more information on this and other products, please visit our web site:
www.angelodecor.com
To contact us regarding this unit, your options include:
Email:customersupport@angelodecor.com | Phone: (780) 453 - 6646 | Fax: (780) 453- 6620
Angelo Décor International Inc. | 15840 –118th Avenue | Edmonton, AB |T5V 1C4
