UNDERSTANDING AND CARING FOR YOUR ANIMAL
COMA REACTOR EURORACK MODULE
USER MANUAL
DRY WET
RETURN
LEVEL
RETURN
FEEDBACK FEEDBACK
TIMECOMA
FILTER
FREQUENCY
FREQUENCY
CV RESONANCE
TIME
CV
FREQUENCY
CV INPUT
TIME
CV INPUT
DRY
IN
DRY
OUT SEND RETURN MIX
OUT
DEPTH
TIME
Congratulations!
You are now a proud human to a Coma Reactor Eurorack
Module.
This delay module looks deceptively simple on the outside - a
seemingly no-frills approach based on the venerable PT2399
delay chip. The routing and sound design possibilities will
however leverage your imagination to create nightmarish
textures, generated by broken synaptic connections of an
analog neocortex terminally damaged by digital drugs.
CONTROLS
DRY: Control the level of the
dry signal in the mix out.
RETURN FEEDBACK: Sends
effected signal back into delay
circuit and back into the FX send.
Can self-oscillate very quickly!
COMA: Attenuates the input
signal into the delay circuit.
Turning this up will overdrive the
delay signal somewhat.
FEEDBACK: Control the amount of
repeats. Will self-oscillate at high
settings!
TIME: Set the delay time interval
for repeats. The longer the delay,
the more noise is introduced into
the signal.
FREQUENCY CV: Attenuverter
to control filter frequency.
White light indicates a +ve
signal, a blue indicates -ve
signal.
TIME CV: Attenuverter to
control repeat times of the
delay circuit. White light
indicates a +ve signal, a blue
indicates -ve signal.
WET: Control the level of the
processed signal in the mix out.
RETURN LEVEL: Control the
level of the return FX signal.
FILTER FREQUENCY: Control
the frequency of the Twin-T BPF
in the return path.
DEPTH: Switch between a
shallow or deep modulation
effect on the time CV input.
TIME: Switch between a long or
short time range. Sets the time
knob between 32ms - 330ms
(switch down) or 32ms - about
2000ms (switch up).
INPUTS/OUTPUTS
SWITCHES
DRY IN: Dry signal to be
processed.
DRY OUT: Buffered copy of dry
signal output (unattenuated).
SEND: Unattenuated delayed
signal output.
MIX OUT: Delayed signal mixed
with dry signal out.
FREQUENCY CV INPUT:
Control Voltage for frequency
cutoff point.
TIME CV INPUT: Control
Voltage to control the repeat
times of the delay circuit.
RETURN: Processed signal
input.
