Anker 633 User manual

Product Number: A1641 5100500XXXX V01
For FAQs and more information, please visit:
anker.com/support
@Anker Deutschland
@Anker Japan
@Anker
@AnkerOcial
@Anker_JP
@anker_ocial
@anker_jp

English 01
Deutsch 07
Español 10
Français 13
Italiano 16
Nederlands 20
Język polski 22
Português 25
 28
Svenska 32
Türk 33
日本語 36
󽋸󺬉󼍐 38
简󱚏󱓩󳷤 40
󽗪󺁨󱓩󳷤 43
 45
   48

0201
Important Safety Instructions
When using this product, basic precautions should always be followed,
including the following:
1) Store the product in a cool and dry place.
2) Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas.
3) Use of a power supply or charger not recommended or sold by the product
manufacturer may result in a risk of fire or injury to persons.
4) Operating temperature should be between 0°C to 25°C / 32°F to 77°F.
5) Do not disassemble the product. Take it to a qualified service person when
service or repair is required. Incorrect reassembly may result in a risk of fire or
injury to persons.
6) If the product is not used for long periods of time, you should charge and
discharge it once every three months.
7) When charging a device, the product may feel warm. This is a normal
operating condition and should not be a cause for concern.
8) In normal conditions, the battery performance will decline over several
years.
9) Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
10) Do not clean the product with harmful chemicals or detergents.
11) Misuse, dropping, or excessive force may cause product damage.
12) When disposing of secondary cells or batteries, keep cells or batteries of
different electrochemical systems separate from each other.
13) Be aware that a discharged battery may cause fire or smoke. Tape the
terminals to insulate them.
14) A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
EN
LED Indicator
Wireless Charging
Indicator
Flashing white Wireless charging
activated
Solid white Charging wirelessly
Flashing white quickly Metal or abnormal objects
detected
Off Wireless charging off
Battery Level Indicator
Flashing white Battery input/output
Solid white Showing the current
battery level
Off No battery power
Note: When your Magnetic Battery exceeds the temperature limit, the battery
level indicator will turn off. Let it cool down before use.
T
•• This wireless charger is not compatible with non-MagSafe phone
cases, such as Otterbox Defender cases.
•• Do not use an adapter with an output of 5V/1A (5W) or less.
•• Wireless chargers make charging more convenient than wired
chargers, but confined by current wireless technology, their
charging speed is slower than that of wired chargers.
•• High temperatures will reduce charging speed and restrict power,
which is something that happens to all wireless chargers. It is
recommended that you charge your device in environments with
temperatures below 25°C / 77°F.
•• Both the protective phone case and the position of your device on
the wireless charger will affect the charging speed. The farther it
is placed from the center of the wireless charger, the slower the
charging speed will be.

0403
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the separation between
the equipment and receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. (4) Consult the
dealer or an experienced radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. The device can be used in portable exposure
condition without restriction.
Product Name: Anker 633 Magnetic Battery (MagGo)
Model: A1641
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: [phone]
IC Statement
This device complies with RSS‐216 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference.
Déclaration d'Industrie Canada
Cet appareil est conforme à la norme RSS-216 d'Industrie Canada. Son
utilisation est sujette aux conditions voulant que cet appareil ne cause aucune
interférence nuisible.
RSS-Gen Issue 5 March 2019
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
RSS-Gen numéro 5 mars 2019
Cet appareil contient des émetteurs / récepteurs exemptés de licence
conformes aux RSS (RSS) d'Innovation, Sciences et Développement
économique Canada. Le fonctionnement est soumis aux deux conditions
suivantes:
(1) Cet appareil ne doit pas causer d'interférences.
(2) Cet appareil doit accepter toutes les interférences, y compris celles
susceptibles de provoquer un fonctionnementindésirable de l'appareil.
Tout changement ou modification non expressément approuvé par la partie
responsable de la conformité pourrait annulerl'autorité de l'utilisateur à utiliser
l'équipement.
RF exposure statement
The equipment complies with IC Radiation exposure limit set forth for
uncontrolled environment. The device can be used in portable exposure

0605
condition without restriction.
This device complies with Industry Canada license-ICES-003. Operation
is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
Le présent appareil est conforme aux CNR d' Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
This product complies with the radio interference requirements of
the European Community.
EU Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A1641 is in
compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.anker.com/
This symbol indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment.
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A1641 is in
compliance with Radio Equipment Regulations 2017 and The Restriction of the
Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the GB declaration of conformity is available
at the following internet address:
https://www.anker.com
This device was tested for typical body-worn operations. The device has
been evaluated to meet general RF exposure requirements. The device can
be used in portable exposure condition without restriction. Third-party
belt-clips, holsters, and similar accessories used by this device should
not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements
and should be avoided. Use only the supplied or an approved antenna.
This device is in compliance with the essential requirements and other
relevant provisions of UKCA. All essential radio test suites have been
carried out.
Anker Innovations Limited
Room 1324-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong
Kong
The following importer is the responsible party (contract for EU and UK
matters)
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United
Kingdom