anko 43055845 User manual
Input Voltage:
KƉĞƌĂƟŶŐWŽǁĞƌ
Demensions: 154*212*86mm
AC100-240V
DC5V/550mA
&ĂďƌŝĐƚŽƵĐŚ
ϱ
I’M NOT
GETTING
RECEPTION
• Connect Adaptor and Antenna to Amplifier • Extend Antenna Ears
• Turn Amplifier on by sliding the Dial towards the right until you hear a ‘click’ sound
• Set Amplifier to minimum • Connect to TV
THESE STEPS SHOULD HELP
IF YOU DON’T RECEIVE CHANNELS,
THERE ARE TWO POSSIBLE ISSUES
Place the antenna near a window
facing towards the tower
SCAN FOR CHANNELS
1
Unplug antenna from Amplifier
Plug Antenna directly in to TV
SCAN FOR CHANNELS
2
Rotate Antenna 45 degrees again
(90 degrees total)
SCAN FOR CHANNELS
4
Retract Antenna Ears
SCAN FOR CHANNELS
5
Rotate Antenna 45 degrees
SCAN FOR CHANNELS
3
Plug Amplifier back in
Extend Antenna Ears
SCAN FOR CHANNELS
6
Increase Amplifier Dial by 1/8 turn
SCAN FOR CHANNELS
7
Ensure Antenna Ears are extended
Elevate Antennas high as possible
SCAN FOR CHANNELS
9
Retry the previous steps in
different locations in the house
SCAN FOR CHANNELS
10
Repeat step 6 until the Amplifier
Dial has reached the maximum
SCAN FOR CHANNELS
8
SIGNAL TOO STRONG SIGNAL TOO WEAK
