anko 43154241 User manual

Instruction Manual
3-in-1 Streaming Solution
Keycode:43154241
Please read the instruction manual before using this device and follow all the safety
instructions to avoid damage caused by improper usage.
Features

Accessories:
1.
1.8 meter tripod stand x1
2.
Microphone boom arm x1
3.
8 inch ring light with USB cable x1
4.
Metal tray x1
5.
E holder x1
6.
ball head x1
7.
phone clip stick x1
8.
phone clip for ring light X1
9.
phone clip for E holder X2
8 inch ring light
Function
The LED ring light have 3 light modes (white, warm yellow, warm white),
10 adjustable brightness

How to install
1. Unfold the tripod on a flat platform.
2. Fix the metal tray with your desired height and mount the screw tightly.
3. Unscrew the Microphone boom arm, fix it on the top part of tripod and screw tightly.

4. Unscrew the nut, extend the boom arm to desired length, then screw tightly.
5. Insert a microphone (not included).
6. Remove the black head of the top of tripod, mount the E holder on it.

7. Mount both phone holders on the E holder.
8. Screw the ball head to the E-holder with 1/4 inch mounting screw, tightened screw cap after
connection;
7. Screw the ring light to the tripod stand through threaded joint with the screw cap.

8. Screw the phone clip stick to the light
9. Unscrew the nut behind the phone clip
10. Aimed the rotation ball axis into the hole.

11. Push the axis into the nut and secure the nut.
12.Put the phone in the phone clip in vertical or horizontal position phone clip.
13. Connect the USB cable to an USB adapter (Not included).
Specifications
Input: DC 5V 1.8A