annke I61BK User manual

Turret

N etw orkTurretCam era·Quick Start Guide
1
Ab ou tth is M anual
The Manual includes instruc ons for using and managing the
product. Pictures, charts, images and all other informa on
hereina er are for descrip on and explana on only. The
informa on contained in the Manual is subject to change, without
no ce, due to rmware updates or other reasons. Please nd the
latest version in the company website
Please use this user manual under the guidance of professionals.
Leg alD isclaim er
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. OUR COMPANY
SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL
RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS
PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE
APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE
EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATER PREVAILS.
Reg ulatory Inform ation
FC C Inform ation

N etw ork Cam era·Quick Start Guide
2
Please take a en on that changes or modi ca on not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FC C com plian ce:This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protec on against harmful interference in a residen al installa on.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruc ons, may cause harmful interference to radio
communica ons. However, there is no guarantee that interference
will not occur in a par cular installa on. If this equipment does
cause harmful interference to radio or television recep on, which
can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separa on between the equipment and receiver.
—Connect the equipment into an outlet on a circuit di erent from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FC C C onditio ns
This device complies with part 15 of the FCC Rules. Opera on is
subject to the following two condi ons:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired opera on.
Turret

N etw ork Cam era·Quick Start Guide
3
EU C on form ity Statem ent
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized European
standards listed under the EMC Direc ve 2014/30/EU, the RoHS
Direc ve 2011/65/EU.
2012/19/EU (WEEE direc ve): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collec on points. For more informa on see:
www.recyclethis.info
2006/66/EC (ba ery direc ve): This product
contains a ba ery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documenta on for speci c ba ery
informa on. The ba ery is marked with this symbol,
which may include le ering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the ba ery to your
supplier or to a designated collec on point. For more informa on
see:www.recyclethis.info
In du stry Can ad a IC E S- 003 C o m p lian ce
This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.
Safety In struction
Turret

N etw ork TurretCam era·Quick Start Guide
4
These instruc ons are intended to ensure that user can use the
product correctly to avoid danger or property loss.
The precau on measure is divided into “Warnings” and “Cau ons”
W arning s:Serious injury or death may occur if any of the warnings
are neglected.
Cau tio n s:Injury or equipment damage may occur if any of the
cau ons are neglected.
W arning s
●Proper con gura on of all passwords and other security
se ngs is the responsibility of the installer and/or end-user.
●In the use of the product, you must be in strict compliance with
the electrical safety regula ons of the na on and region. Please
refer to technical speci ca ons for detailed informa on.
●Input voltage should meet both the SELV (Safety Extra Low
Voltage) and the Limited Power Source with 12 VDC according
to the IEC60950-1 standard. Please refer to technical
speci ca ons for detailed informa on.
W arning sFollow these
safeguards to prevent serious
injury or death.
Cau tio n sFollow these
precau ons to prevent poten al
injury or material damage.

N etw ork TurretC am era·Quick Start Guide
5
●Do not connect several devices to one power adapter as
adapter overload may cause over-hea ng or a re hazard.
●Please make sure that the plug is rmly connected to the power
socket. When the product is mounted on wall or ceiling, the
device shall be rmly xed.
●If smoke, odor or noise rise from the device, turn o the power
at once and unplug the power cable, and then please contact
the service center.
C au tio ns
●Make sure the power supply voltage is correct before using the
camera.
●Do not drop the camera or subject it to physical shock.
●Do not touch sensor modules with ngers. If cleaning is
necessary, use clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period,
please replace the lens cap to protect the sensor from dirt.
●Do not aim the camera at the sun or extra bright places.
Blooming or smearing may occur otherwise (which is not a
malfunc on), and a ect the endurance of sensor at the same
me.
●The sensor may be burned out by a laser beam, so when any
laser equipment is in using, make sure that the surface of
sensor will not be exposed to the laser beam.
●Do not place the camera in extremely hot, cold (the opera ng
temperature shall be-30°C ~+60°C, or -40°C ~ +60°C if the

N etw orkTurretCam era·Quick Start Guide
6
camera model has an “H” in its su x), dusty or damp loca ons,
and do not expose it to high electromagne c radia on.
●To avoid heat accumula on, good ven la on is required for
opera ng environment.
●Keep the camera away from liquid while in use.
●While in delivery, the camera shall be packed in its original
packing, or packing of the same texture.
●Regular part replacement: a few parts (e.g. electroly c
capacitor) of the equipment shall be replaced regularly
according to their average enduring me. The average e
varies because of di erences between opera ng environment
and using history, so regular checking is recommended for all
the users. Please contact with your dealer for more details.
●Improper use or replacement of the ba ery may result in
hazard of explosion. Replace with the same or equivalent type
only. Dispose of used ba eries according to the instruc ons
provided by the ba ery manufacturer.
●If the product does not work properly, please contact your
dealer or the nearest service center. Never a empt to
disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or
maintenance.)

N etw orkTurretCam era·Quick Start Guide
7
Table ofC ontents
1 A p p earan ce D escrip tio n ..............................................................8
....................................................................................
2 In stallation 10
3 Setting the N etw ork C am era overth e LA N ............................. 19
Wiring ........................................................................... 193.1
Ac va ng the Camera ................................................... 203.2
Ac va on via Web Browser................................ 203.2.1
Ac va on via SADP So ware ............................. 213.2.2
Modifying the IP Address ...............................
........................................................
............... 233.3
4 A ccessin g via W eb B row ser 26
5 Quick Operation Guide (German Version) 28
...............................

N etw orkTurretCam era·Quick Start Guide
8
1A pp earan ce D escrip tion
This camera series of turret camera has four appearance types.
1.1Typ eI
Overview of Type I Turret CameraFigure 1-1
Descrip onTable 1-1
No. Descrip on No. Descrip on
1 Enclosure 3
Power Cord
2 Camera Body 4
5Network Cable
Note:
For cameras support power over Ethernet (PoE), the power is passed
along with data on Ethernet cabling. And a switch supports PoE
1
2
3
4
5

N etw orkTurretCam era·Quick Start Guide
9
1.2Typ e II
1
2
3
45
6
8
7
Type I Turret CameraFigure 1-2
Descrip onTable 1-2
No. Descrip on
No
Descrip on
1 Trim Ring 5 Power Cord
2 Enclosure 6 10M/100M self-adap ve
Ethernet interface (PoE)
3 Moun ng Base 7 RST (Reset) Bu on
4 Camera 8 Memory Card Slot
N otes:
●For this type I camera, the layout of memory card slot and
reset bu on may be di erent from model to model.
●Press Reset bu on about 10s when the camera is power on or
reboo ng to restore the default se ngs, including the user
name, password, IP address, port No., etc.

N etw orkTurretCam era·Quick Start Guide
10
2Installation
B efo re yo u start:
●Make sure the device in the package is in good condi on and all
the assembly parts are included.
●The standard power supply is 12 VDC, please make sure your
power supply matches with your camera.
●Make sure all the related equipment is power-o during the
installa on.
●Check the speci ca on of the products for the installa on
environment.
●Make sure that the wall is strong enough to withstand four
mes the weight of the camera and the bracket.
For the camera that supports IR, you are required to pay a en on to
the following precau ons to prevent IR re ec on:
●Make sure that there is no re ec ve surface too close to the
camera lens. The IR light from the camera may re ect back into
the lens causing re ec on.
2.1 Ceiling Moun
Before you start:
2.1.1 Type l
Both wall moun ng and ceiling moun ng are suitable for the turret
camera. Ceiling moun ng will be taken as an example in this sec on.

Network TurretCamera·Quick Start Guide
11
And you can take steps of ceiling moun ng as a reference for wall
moun ng.
Steps:
1. Paste the drill template (supplied) to the desired moun ng
posi on on the ceiling.
2. Drill the screw holes and the cable hole in the ceiling according to
the drill template.
Note:
Drill the cable hole, if adop ng ceiling outlet to route the cable.
85 mm (3.35"
)
110 mm
(4.33")
3- 4.2 mm
(0.17")
20 mm
(0.79")
Screw
Hole
Cable
Hole
Figure 2-1 The Drill Template
3. Disassemble the camera.
1). Rotate the camera to align the notch to one of the marks.
2). Insert a coin or another similar tool to the notch.
3). Press down the coin or another similar tool to pry the
moun ng base so as to separate the moun ng base from the
camera.

Network TurretCamera·Quick Start Guide
12
Mark
Notch
Figure 2-2 Disassemble the Camera
4. Fix the moun ng base to the ceiling with supplied screws.
Notes:
In the supplied screw package, both self-tapping screws, and
expansion bolts are contained.
If the ceiling is cement, expansion bolts are required to x the
camera. If the ceiling is wooden, self-tapping screws are
required.
Figure 2-3 Fix the Moun ng Base
5. Route the cables through the cable hole or the side opening.
6. Install the camera body back to the moun ng base.

Network TurretCamera·Quick Start Guide
13
Figure 2-4 Install the Camera Body
7. Connect the power cord and network cable.
8. Power on the camera, and set the network con gura on (for
details, refer to 3 Se ng the Network Camera over the LAN and 4
Accessing via Web Browser)to check whether the image is go en
from the op um angle. If not, adjust the surveillance angle.
0° to 360°
0° to 360°
0° to 75°
Figure 2-5 Adjust Surveillance Angle
1). Hold the camera body and rotate the enclosure to adjust the
pan angle [0° to 360°].

Network TurretCamera·Quick Start Guide
14
2). Move the camera body up and down to adjust the lt angle [0°
to 75°].
3). Rotate the camera body to adjust the rota on angle [0° to
360°].

2.1.2Type II
Step s:
Disassemble the camera.1.
1). Rotate the trim ring an clockwise to take it o from the camera.
Network TurretCamera·Quick Start Guide
15
2). Loosen the xing screw. Take the moun ng base o from the
camera and the enclosure.
3). Separate the camera and the enclosure.
①
②
③
Fixing Screw
Disassemble the CameraFigure 2-6
Install memory card If the IP camera is used with a video recorder,.2.
1). Unscrew the memory card slot cover.
2). Insert the memory card.
Memory Card
Install Memory CardFigure 2-7
3). (Op onal) to unmount the memory card, push to get it
ejected.
the video recorder can directly record videos. And you don’t need
to insert a TF card. If you use the IP camera alone, you need to
insert a TF card before recording videos.

N etw orkTurretCam era·Quick Start Guide
16
4). Screw the memory card slot cover back.
Paste the drill template to desired moun ng place.3.
Drill the screw holes (for expansion screws) and the cable hole4.
on the ceiling according to the drill template.
N o te:
If the camera is installed to a wooden wall, use self-tapping
screws instead of expansion screws.
Drill TemplateFigure 2-8
Fix the moun ng base to the ceiling with two supplied screws.5.

N etw orkTurretCam era·Quick Start Guide
17
Drill Template
Mounting Base
Fix Moun ng BaseFigure 2-9
Connect the corresponding power/network cable. Refer to the6.
sec on 2.3 for the water-proof accessory installa on if the
camera is installed in the outdoor.
Install the camera along with the enclosure to the moun ng7.
base.
Install the CameraFigure 2-10
Adjust the surveillance angle of the camera. Secure the xing8.
screw a er adjustment.

N etw orkTurretC am era·Quick Start Guide
18
Pan:
0° to 360°
Tilt:
0° to 75°
Rotate:
0° to 360°
Adjust Surveillance AngleFigure 2-11
Aach the trim ring to the camera and rotate the trim ring9.
clockwise to get it secured.
Figure 2-12 Install Trim Ring

N etw orkTurretCam era·Quick Start Guide
19
3Settin g th e N etw ork Cam era overth e
LA N
N ote:
You shall acknowledge that the use of the product with Internet
access might be under network security risks. For avoidance of any
network a acks and informa on leakage, please strengthen your
own protec on.
If the product does not work properly, contact your dealer or the
nearest service center for help.
W iring3.1
Connect the camera to network according to the following gures.
半球
N etw ork Cable
or
N etw ork Cam era
Com puter
Connec ng DirectlyFigure 3-1
网络交换机
半球
N etw ork Cable
N etw ork Cable
or
or
N etw ork Cam era
Com puter
Connec ng via a Switch or a RouterFigure 3-2