annke I91BF User manual

User Manual for IP Camera’s
Remote View
Please refer to the notes below before use:
1. The IP camera can be used with a NVR for preview, recording and
playback.
2. The IP camera can also be used independently for preview. And if
it supports TF card storage, it can also be used for recording and
playback.
3. Before you use a new IP camera independently for video
surveillance, you need to activate it first. You can activate your IP
camera by mobile app, IE, SADP , PC software, or NVR.
Step 1: Download and install the mobile APP
1. Connect your phone to Wi-Fi, search and download APP “Annke
Vision” from APP store or Google play. Then install and open
the app.
If you want to use a new IP camera independently for video
surveillance, please follow steps below:
2. Click “Register” to sign up for an account by your mobile phone
number or email address step by step, then please click “Login”
after you registered successfully.
Note: Please select the correct country/region when you register an
account; it cannot be changed once selected.
Step 2: Power on the device
Power on the camera with your DC12V power supply, connect the
camera to your router with a network cable that can be connected
to the Internet.
2. If the camera has not been activated before, it will prompt “The
device is offline”. Click “Connect to a Network”, make
sure the camera has been connected to a router, then click
“Connected and Next” .
Step 3: Add the device onto your phone
1. Open the APP, click " " or the " " button in the upper
right corner to add the device. Scan the bar code in the label of
camera or box.

3. Then it will connect to the network. Please set a device password
to activate it, and keep it well.
5.Then the device will added to your account soon.
6. After the device is added, it will appear in the device list. You can
click to access the live preview. You can also adjust the preview
image resolution to HD, take snapshots, record to your phone, etc.
7. You can click the “...” button in the top right corner to access the
camera's settings interface, modify the device name, change the
time zone, etc. If the IP camera supports TF card, there will be
storage status prompt the first time you insert the card. You need
to click “Initialized” to format the new TF card before recording.
Manufacturer: Shenzhen Kean Digital co., Ltd.
Address: 10th Floor, Rujun Building, NO. 105, The
Center Road, Bantian Street, Longgang
District, Shenzhen, 518129,China
For technical help please visit help.annke.com
Tech support: suppor[email protected]
Made in China
4. Now please enable Annke Vision service. Tick “Read and Agree
Annke Vision Terms of Service”, click “next”, then set a
verifica tion code for your camera and keep it well. After that,
please click “Enable Annke Vision Service”.