ANPVIZ HK Series User manual

User
Manual
EN / DE / FR / ES / IT Version
Network Dome Camera
HK Series

Thank you very much for choosing ANPVIZ.
Our products are supported by the world's first video monitoring manufacturers.
and they have adopted military level of protection.
It is our top priority to ensure your data safety and offer you a satisfactory service.
We strongly recommend that you set up an appropriate password for your device and save it
also set up security questions and reserved email to ensure you can reset password by yourself.
If you have any questions, please feel free to email us at [e-mail]
Or visit https://www.anpvizsecurity.com/download/
Please download Client software and user manuals from our download center
https://www.anpvizsecurity.com/downloadcenter.html
- 1 -
EN

The Manual includes instructions for using and managing the product Picture, charts,
images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version in the company
website. Please use this user manual under the guidance of professionals.
About this Manual
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT
SHALL BE WHOLLY AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY
RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER
DAMAGES RESULTING FROM CYBER ATOCK, HACKER ATTACK VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS HOWEVER, OUR
COMPANY WILL PROVIDE TIM ELY TECH NIC AL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO
ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. OUR COMPANY
SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.IN THE EVENT OF ANY CONFLICTS BETWEEN THIS
MANUAL ANDTHE APPLICABLE LAW, TH E LATER PREVAILS.
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the users authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
Legal Disclaimer
Regulatory Information
- 2 -

- 3 -
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver Is connected.
—Consult the dealer or an experienced radio/TV technician for help.
EU Conformity Statement
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2.This device must accept any Interference received. Including Interference that may
cause undesired operation
This product and - if applicable - the supplied accessories too are marked
with ( £ 'CE' and comply therefore with the applicable harmonized European
standards listed under the Low Voltage Directive 2015/35/EU, the EMC
Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your Local supplier upon the purchase of
equivalent new equipment or dispose of it at designated collection points.
For more information, please see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste In the European Union. See the
product documentation for specific battery information. The battery is marked
with this symbol which may Include lettering to Indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point For more Information,
please see: www.recyclethis.info.
Safety Instruction
These instructions are Intended to ensure that user can use the product correctly to
avoid danger or property loss. The precaution measure is divided into “Warnings” and
"Cautions"

- 4 -
Warnings: Serious Injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings: Follow these safeguards to
prevent serious injury or death.
Cautions: Follow these precautions to
prevent potential injury or material damage.
Warnings
• Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
• In the use of the product you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for detailed
information.
• In put voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited
Power Source with 100~240 SC or 12 VDC according to the IEC60950-1 standard.
Please refer to technical specifications for detailed information.
• Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
• Please make sure that the plug is firmly connected to the power socket
• If smog odor or noise rise from the device, turn off the power at once and unplug the
power cable, and then please contact the service center.
Cautions
• Make sure the power supply voltage Is correct before using the camera.
• Do not drop the camera or subject it to physical shock,
• Do not touch senor modules with fingers. If cleaning Is necessary, use clean cloth with
a bit of ethanol and wipe it gently. If the camera will not be used for an extended period,
replace the lens cap to protect the sensor from d lit
• Do not aim the camera at the sun or extra bright places. Blooming or smearing may
occur otherwise (which Is not a malfunction), and affect the endurance of sensor at the
same time.
• The sensor may be burned out by a Laser beam, so when any Laser equipment is in
using, make sure that the surface of sensor will not be exposed to the laser beam.

- 5 -
• Do not place the camera In extremely hot, cold (the operating temperature shall be
-30°C to +60°C, or -40"C to +60*C if the camera model has an "H1 in its suffix), dusty or
damp Locations, and do not expose it to high electromagnetic radiation.
• To avoid heat accumulation, good ventilation is required for operating environment.
• Keep the camera away from liquid while In use.
• While in delivery, the camera shall be packed in its original packing, or packing of the
same texture.

- 6 -
Figure 1-1 Figure 1-1 Camera Overview
Type I:
Table 1-1 Camera Description
No.
Description
1 Mounting Base
2 Panning Adjusting Bracket
3 Front Cover
4 Power Cord
5
Network Cable
6 IR LED
7 Lens
8 Black Liner
9 Safety Rope
1. Appearance Description

- 7 -
2. Installation
● Make sure the device in the package is in good condition
and all the assembly parts are included.
● The standard power supply is 12 VDC or PoE. Make
sure your power supply matches with your camera.
● Make sure all the related equipment is power-off during
the installation.
● Check the specification of the products for the installation
environment.
● Make sure that the wall is strong enough to withstand
four times the weight of the camera and the bracket.
For the camera that supports IR, you are required to pay attention
to the following precautions to prevent IR reflection:
● Dust or grease on the dome cover will cause IR reflection.
Do not remove the dome cover film until the installation is
finished. If there is dust or grease on the dome cover, clean
the dome cover with clean soft cloth and isopropyl alcohol.
● Make sure that there is no reflective surface too close to
the camera lens. The IR light from the camera may reflect
back into the lens to cause the reflection.
● The foam ring around the lens must be seated flush
against the inner surface of the bubble to isolate the lens
from the IR LEDS. Fasten the dome cover to camera body
so that the foam ring and the dome cover are attached
seamlessly.
Before you start:

- 8 -
2.1 Installation
For camera models that support memory card as local storage,
you can follow the steps to mount and unmount the memory
card.
Steps:
1. Loosen the screws on the bubble. Remove the bubble to
expose the memory card slot.
Figure 1-1 Remove Bubble
Notes:
● In case of losing, screws on bubble cannot be screwed out
thoroughly.
● The bubble is fastened to the camera with a safety rope, and
DO NOT pull the rope to remove the bubble. Otherwise, the
camera will be damaged.

- 9 -
2. Find the memory card slot to insert the memory card.
Figure 1-1 Insert Memory Card
3. (Optional) To unmount the memory card, push to get it ejected.
2.2 Ceiling Mounting
Step:
1. Paste the drill template to the desired mounting place.
2. Drill the screw holes on the ceiling according to the drill
template.

- 10 -
Figure 2-3 Drill Template
Notes:
● If you choose to route cable through the ceiling, cut a cable
hole according to Hole A on drill template.
● You can also route cable from the side outlet as shown in .
● If you install the camera for outdoor scenes, install the
waterproof jacket to the network cable. See Section .

- 11 -
Figure 2-4 Side Outlet
3. Route the cables and fix the mounting base on the ceiling with
three screws.
4. Adjust surveillance angle.
1). Loosen one tilting adjusting screw to adjust the tilting
position. Tighten the screw after adjustment.
2). Hold the black liner to adjust the panning position.

- 12 -
Figure 2-6 2-Axis Adjustment
5. Install the bubble back to the camera.
Figure 2-7 Install Bubble
2.3 Mounting with Brackets
This camera series supports mounting with wall mounting
bracket and pendant mounting bracket.

2.3.1 Wall Mounting with Junction Box
The wall mounting bracket with junction box is not included
in the package. You need to prepare one, if you adopt this
mounting type.
- 13 -
Steps:
1. Mark the screw holes on desired mounting place.
2. Fix the bracket to the wall with four expansion bolts.
Figure 2-8 Fix the Bracket
3. Route the cables.
If you install the camera for outdoor scenes, install the
waterproof jacket to the network cable. See Section .
Note:
Figure 2-9 Cable Routing

- 14 -
1. Unscrew the bubble of the camera.
2. (Optional) Insert the memory card to the camera, if your
camera supports memory card installation. Refer to
Section .
3. Fix the camera to the cap of the wall mounting bracket.
Figure 2-1 0 Fix the Camera to Wall Mounting Bracket
1. Adjust the surveillance angle of camera. Refer to
Step 4 in Section .
2. Install the bubble back to the camera.
2.3.2 Pendant Mounting
The pendant mounting bracket is not included in the
package. You need to prepare one in advance, if you
adopt this mounting type.
Steps:
1. Mark the screw holes on the desired mounting place.
2. Drill four screw holes for expansion bolts.
3. Route the cables and fix the pendant mounting
bracket to ceiling.

- 15 -
Figure 2-11 Fix the Pendant Mount
4. Unscrew the bubble of the camera.
5. (Optional) Insert the memory card to the camera,
if your camera supports memory card installation.
Refer to Section .
6. Fix the camera to the cap of the pendant mounting
bracket with three supplied self-tapping screws.
Figure 2-1 2 Fix the Camera to Cap

- 16 -
7. Screw the cap to the pendant mounting bracket.
Figure 2-1 3 Install the Cap
1. Adjust surveillance angle of camera. Refer to Step 4 in
Section 2.2.
2. Install the bubble back to the camera.
2.4 Waterproof Measures
If the camera is installed outdoor, you should use the
waterproof accessory or tapes to waterproof the cables.
Otherwise, the cables might get wet or a short circuit
occurs.

- 17 -
2.4.1 Install Network Cable Waterproof Jacket
Figure 2-1 4 Install Waterproof Jacket
1. Feed the network cable through ① and ③ in order.
2. Fix ② on the network cable between ① and ③.
3. Place ⑤ onto the end of ⑥, and plug the RJ45 male
connector into RJ45 female connector.
4. Screw ③ to ⑥ clockwise.
5. Push ② into ③.
6. Secure ① with the ③ in clockwise direction.
Step:
2.4.2 Waterproof Other Cables
After routing and connecting the cables, use the
waterproof tapes to wrap up the cables. Connected
cables and spare cables both should be wrapped up
as the figures below.

- 18 -
Figure 2-15 Waterproof Cables
3. Activate and Access Network Camera
Scan the QR code to get Activate and Access Network
Camera. Note that mobile data charges may apply if
Wi-Fi is unavailable

- 19 -
4. Operate IP Cameras via IE Browser
You can configure the IP cameras In the LAN network via the IE browser.
1. Power on the camera with a DC 12 V adapter and connect it to the same router as your
computer with a network cable.
2. Install the SADP software and search the camera.
can download SADP software from our website:
https://www.anpvizsecurity.com/software-tools-app-a00062a1.html.
3. Check the box of the camera and then activate the camera by creating a login password.