Anritsu MT1000A Network Master Pro User manual

MT1000AMT1000A
Network Master ProNetwork Master Pro
OTDR ModulesOTDR Modules
Operation ManualOperation Manual
Sixth EditionSixth Edition
For safety and warning information, please read thisFor safety and warning information, please read this
manual manual before attempting to use the equipment. before attempting to use the equipment.
Keep this manual with the equipment.Keep this manual with the equipment.
ANRITSU CORPORATIONANRITSU CORPORATION
Document No. M-W3810AE-6.0

MT1000A Network Master Pro
OTDR Modules
Operation Manual
25 November 2015 (First Edition)
20 December 2016 (Sixth Edition)
© Copyright 2015-2016, ANRITSU CORPORATION.
All rights reserved. No part of this manual may be reproduced without the prior
written permission of the publisher.
The contents of this manual may be changed without prior notice.
Printed in Japan
22

About This ManualAbout This Manual
The documentation for MT1000A Network Master Pro applies to the instrument
with the MU100020A, MU100021A, or MU100022A OTDR Module installed. This
operation manual describes both the basic operation of the instrument as well as
the operations available via interface options and predefined applications/tests.
MT1000A Network Master Pro OTDR Modules Operation Manual (this manual)MT1000A Network Master Pro OTDR Modules Operation Manual (this manual)
Operations for the MT1000A Network Master Pro mainframe with OTDR
module (MU100020A, MU100021A, and MU100022A) are described.
MT1000A Network Master Pro OTDR Modules Quick Reference GuideMT1000A Network Master Pro OTDR Modules Quick Reference Guide
A printed quick user's guide that introduces the basic operation of the
instrument.
MT1000A Network Master Pro OTDR Modules Remote Scripting Operation ManualMT1000A Network Master Pro OTDR Modules Remote Scripting Operation Manual
Operations of the command-based Remote Control function are described.
Manual structureManual structure
The contents of the manual is structured in the following way:
Chapter 1 - IntroductionChapter 1 - Introduction
Chapter 2 - ConfigurationChapter 2 - Configuration
Chapter 3 - Human-Machine-InterfaceChapter 3 - Human-Machine-Interface
Chapter 4 - Graphical User InterfaceChapter 4 - Graphical User Interface
Chapter 5 - Optical Fibre Test ApplicationsChapter 5 - Optical Fibre Test Applications
Chapter 6 - Utility ApplicationsChapter 6 - Utility Applications
Chapter 7 - Performance Test and CalibrationChapter 7 - Performance Test and Calibration
Chapter 8 - SpecificationsChapter 8 - Specifications
Chapter 9 - SupportChapter 9 - Support
Chapter 4 consists of a general introduction to the GUI. Chapters 5 contains
descriptions of each screen, sub-screen and major dialog box. The descriptions are
provided in the following order:
Setup and result screens for each application. The applications are described
in the same order as they appear on the application selector screen.
Measurement condition setup screens
This operation manual is intended for those who have the basic knowledge of the
following:
Basic knowledge of optical fiber communication, handling optical parts and
optical fibers
33

44
99
1010
1111
1111
1111
1212
12
12
12
13
13
1414
1616
17
1818
18
19
19
20
21
2323
2424
24
24
25
2525
25
2626
26
27
27
27
2929
3030
30
30
3434
3535
35
35
37
3939
4040
4141
41
4343
4444
44
45
45
4848
4848
4949
Table of ContentsTable of Contents
00 Table of ContentsTable of Contents
11 IntroductionIntroduction
1.11.1 MainframeMainframe
1.21.2 OTDR Module 1310/1550nm SMF (MU100020A)OTDR Module 1310/1550nm SMF (MU100020A)
1.31.3 OTDR Module 1310/1550/850/1300nm SMF/MMF (MU100021A)OTDR Module 1310/1550/850/1300nm SMF/MMF (MU100021A)
1.41.4 OTDR Module 1310/1550/1625nm SMF (MU100022A)OTDR Module 1310/1550/1625nm SMF (MU100022A)
1.51.5 Symbols and ConventionsSymbols and Conventions
1.5.1 Symbols Used in Manual
1.5.2 Safety Symbols Used on Equipment
1.5.3 Notes
1.5.4 Hints
1.5.5 Option
1.61.6 WarningsWarnings
1.71.7 CautionsCautions
1.7.1 Cautions against Computer Virus Infection
1.81.8 PrecautionsPrecautions
1.8.1 ESD (Electrostatic Discharge)
1.8.2 Optical Connectors
1.8.3 Cautions on Handling Optical Fiber Cables
1.8.4 Ventilation
1.8.5 Countries and Regions Permitting WLAN Use
22 ConfigurationConfiguration
2.12.1 Delivered AccessoriesDelivered Accessories
2.1.1 Standard Accessories
2.1.2 Optional Accessories
2.1.3 Module Accessories
2.22.2 Mains Power AdapterMains Power Adapter
2.2.1 Connecting Mains Power Adapter
2.32.3 Rechargeable BatteryRechargeable Battery
2.3.1 Installing or Replacing Battery
2.3.2 Charging Battery in Fast Mode
2.3.3 Charging Battery in Normal Mode
2.3.4 Battery Status Information
2.42.4 Optical FibersOptical Fibers
2.52.5 Support Stand and Carrying StrapSupport Stand and Carrying Strap
2.5.1 Support Stand
2.5.2 Carrying Strap and Handle
2.62.6 Modules ConfigurationModules Configuration
2.72.7 Attaching the ModulesAttaching the Modules
2.7.1 Replacing the MU100010A 10G Multirate modules
2.7.2 Attaching OTDR module with 10G Multirate module
2.7.3 Attaching OTDR module without 10G Multirate module
33 Human-Machine-InterfaceHuman-Machine-Interface
3.13.1 Touch Screen DisplayTouch Screen Display
3.23.2 Key OperationKey Operation
3.2.1 Power Button
3.33.3 Head SetHead Set
3.43.4 Connector PanelConnector Panel
3.4.1 Test Interfaces
3.4.2 Service Interfaces
3.4.3 Optical Connector/Optical Adapter Cleaning
3.53.5 Command-Based Remote ControlCommand-Based Remote Control
3.63.6 File Access via USB InterfaceFile Access via USB Interface
3.73.7 File Access via Ethernet InterfaceFile Access via Ethernet Interface
Table of ContentsTable of Contents
44

49
49
5151
51
51
5353
5454
54
55
56
63
6464
64
75
8080
80
80
80
81
81
8383
8484
84
93
97
109
118118
118
118
119
122122
122
123
135
137
143143
145
147
149149
150150
150
152
153153
153
153
156156
157157
157
158
158
159
161161
163163
164164
164
3.7.1 Accessing files in Network Master from the PC
3.7.2 Mounting the Shared Folder of Networked PC to the Network Master
3.83.8 GPS ReceiverGPS Receiver
3.8.1 G0325A GPS Receiver
3.8.2 Operating GPS Receiver
44 Graphical User InterfaceGraphical User Interface
4.14.1 General Handling of the GUIGeneral Handling of the GUI
4.1.1 GUI Concept
4.1.2 Navigating in the GUI
4.1.3 Layout of the GUI Screens
4.1.4 Keypads for Entering Text in Fields
4.24.2 ToolbarsToolbars
4.2.1 Instrument Toolbar
4.2.2 Application Toolbar
4.34.3 Startup and Switch-off SequencesStartup and Switch-off Sequences
4.3.1 Instrument Startup
4.3.2 Application Startup
4.3.3 Accessing Previous Tests and Test Results
4.3.4 Closing an Application
4.3.5 Switching Off the Instrument
55 Optical Fiber Testing ApplicationsOptical Fiber Testing Applications
5.15.1 Standard OTDRStandard OTDR
5.1.1 Measurement Condition Setup
5.1.2 Test Setup
5.1.3 Test Results
5.1.4 Measurements
5.25.2 FTTAFTTA
5.2.1 Measurement Condition Setup
5.2.2 Test Setup
5.2.3 Test Result
5.35.3 ConstructionConstruction
5.3.1 Application Toolbar
5.3.2 Measurement Condition Setup
5.3.3 Test Setup
5.3.4 Test Result
5.45.4 OLTSOLTS
5.4.1 Loss Test Setup
5.4.2 Loss Table
66 Utility ApplicationsUtility Applications
6.16.1 ScenarioScenario
6.1.1 Scenario Manager
6.1.2 Running the Scenario
6.26.2 GPSGPS
6.2.1 Test Setup
6.2.2 Test Results
6.36.3 PDF ViewerPDF Viewer
6.46.4 VIPVIP
6.4.1 Application Toolbar
6.4.2 Connecting the probe
6.4.3 Test Setup
6.4.4 Test Results
6.56.5 WiresharkWireshark
77 Performance Test and CalibrationPerformance Test and Calibration
7.17.1 Performance TestPerformance Test
7.1.1 Required instruments for performance test
55

166
167
168
169
171
173
176
177
178
179179
179
180
181181
189189
190190
190
191
191
192
192
193193
193
193
195
196
196
197
197
198198
198
198
200
201
201
202
202
203203
203
203
205
205
206
206
207
209209
210210
210
210
211211
212212
213213
213
213
214214
214
214
214
7.1.2 Wavelength
7.1.3 Pulse Width
7.1.4 Dynamic Range
7.1.5 Distance Measurement Accuracy
7.1.6 Linearity
7.1.7 Dead Zone
7.1.8 Optical Power Level and Wavelength of VFL
7.1.9 Optical Power Level and Wavelength of Light Source
7.1.10 Optical Power Meter Measurement Accuracy
7.27.2 CalibrationCalibration
7.2.1 Backscatter coefficient level calibration
7.2.2 Measurement accuracy calibration of optical power meter
7.37.3 Performance Test Result SheetPerformance Test Result Sheet
88 SpecificationsSpecifications
8.18.1 MT1000AMT1000A
8.1.1 Configuration
8.1.2 External Interfaces
8.1.3 Other Interfaces
8.1.4 Environment Performance
8.1.5 Mechanical Performance
8.28.2 MU100020A OTDR Module 1310/1550nm SMFMU100020A OTDR Module 1310/1550nm SMF
8.2.1 Configuration
8.2.2 OTDR
8.2.3 Optical Power Meter
8.2.4 Light Source
8.2.5 VFL (Option 002)
8.2.6 Environment Performance
8.2.7 Mechanical Performance
8.38.3 MU100021A OTDR Module 1310/1550/850/1300nm SMF/MMFMU100021A OTDR Module 1310/1550/850/1300nm SMF/MMF
8.3.1 Configuration
8.3.2 OTDR
8.3.3 Optical Power Meter
8.3.4 Light Source
8.3.5 VFL (Option 002)
8.3.6 Environment Performance
8.3.7 Mechanical Performance
8.48.4 MU100022A OTDR Module 1310/1550/1625nm SMFMU100022A OTDR Module 1310/1550/1625nm SMF
8.4.1 Configuration
8.4.2 OTDR
8.4.3 Optical Power Meter
8.4.4 Light Source
8.4.5 VFL (Option 002)
8.4.6 Environment Performance
8.4.7 Mechanical Performance
99 SupportSupport
9.19.1 Maintenance and CleaningMaintenance and Cleaning
9.1.1 Maintenance
9.1.2 Cleaning
9.29.2 Notes On StorageNotes On Storage
9.39.3 Formatting the data area in the Network MasterFormatting the data area in the Network Master
9.49.4 Support and Service AssistanceSupport and Service Assistance
9.4.1 Before you obtain assistance
9.4.2 Obtaining Support or Service Assistance
9.59.5 Transporting and DisposalTransporting and Disposal
9.5.1 Repackaging
9.5.2 Transporting
9.5.3 Disposal
Table of ContentsTable of Contents
66

214
215215
215
215
216
216
216
217217
221221
223223
223
223
223
224
225
226226
226
226
227227
227
230
230
234234
234
234
235
235
236
236
236
237
237
237
237
237
238238
238
238
238
239
9.5.3 Disposal
9.69.6 Special InformationSpecial Information
9.6.1 Equipment Certificate
9.6.2 Anritsu Warranty
9.6.3 Anritsu Corporation Contact
9.6.4 Licensing Information
9.6.5 Availability of Source Code
9.79.7 Software License DocumentSoftware License Document
9.89.8 EULA License DocumentEULA License Document
9.99.9 CE Conformity MarkingCE Conformity Marking
9.9.1 Product Model
9.9.2 Applied Directive
9.9.3 Applied Standards
9.9.4 Authorized Representative
9.9.5 CE Declaration
9.109.10 RCM Conformity MarkingRCM Conformity Marking
9.10.1 Product Model
9.10.2 Applied Standards
9.119.11 Laser SafetyLaser Safety
9.11.1 Laser Safety Classifications
9.11.2 Indication Labels on Product
9.11.3 Laser Radiation Markings
9.129.12 Wireless CertificationWireless Certification
9.12.1 Japan MIC
9.12.2 North America (USA FCC and Canada IC)
9.12.3 Europe CE
9.12.4 Brazil ANATEL
9.12.5 China SRRC
9.12.6 Indonesia SDPPI
9.12.7 Israel MoC
9.12.8 Mexico IFETEL
9.12.9 Philippines NTC
9.12.10 Russia CU Scheme and Minsvyaz
9.12.11 Singapore iDA
9.12.12 Thailand NTC
9.139.13 DeclarationsDeclarations
9.13.1 Notes on Export Management
9.13.2 Information for EU and EFTA Customers Only
9.13.3 Information for U.S. Customers Only
9.13.4 Information for the Chinese Market Only
77

Table of ContentsTable of Contents
88

11 IntroductionIntroduction
This chapter provides a general introduction to the MT1000A Network Master
Pro, and explains the symbols and conventions used in this manual.
99

11..11 MainframeMainframe
The MT1000A Network Master Pro (hereafter called the Network Master and
sometimes the instrument ) is a battery-powered multipurpose
telecommunications test instrument for field use. It is a tool for a wide range of
applications from fast first-aid troubleshooting to comprehensive, in-depth
analysis of transmission problems. The installed options enable the Network
Master to be used both as a full-featured transmission line quality tester and as
an advanced signaling analyzer.
The Network Master features a wide TFT LCD display with touch screen
interface, where results are easily read and color coding and graphical symbols
aid the users in system setup and results analysis. The Network Master also
allows users to store applications settings to reduce time for future
configurations. For fast and efficient data transfer and external communication,
the Network Master houses LAN interface, Bluetooth
® and three USB ports.
Fault location is greatly facilitated by the high degree of portability of the
robust Network Master, allowing measurements to be taken at any suitable
measuring point. Accordingly, the Network Master can be powered either by a
rechargeable and replaceable intelligent high-capacity Li-Ion battery, or via
mains adapter for long-term measurements.
Altogether, these features guarantee the supreme functionality of the Network
Master, allowing both convenience and optimal user-friendly operation.
For latest information, refer to the homepage below.
http://www.anritsu.com/en-us/test-measurement/products/mt1000a
IntroductionIntroduction
1010