Anthem AVM 30 User manual

2. QUICK START
The AVM 30 is a very sophisticated component, providing a multitude of features and connection options,
while providing easy intuitive setup and operation. With your AVM 30 in front of you, browse through the
illustrations in this section to see several quick system hookup options. It’s as simple as following the lines
in the connection diagrams to and from each component.
All of these quick system hookup examples work with the Factory Default settings; none require the
Setup Menu. Just ‘plug & play’! However, references to the Setup Menu section are included to make
you aware of the tremendous versatility of the AVM 30.
For the best sound possible you will still have to calibrate your system in the Setup as outlined in section 7.
Please do not overlook this important system calibration procedure.
2.1 QUICK START GUIDE – Before you start, make sure all components are unplugged.
To connect a CD player, DVD player, TV, VCR, amplifier(s), and powered subwoofer to the AVM 30:
Note:For this Quick start setup section, you will only need to connect either the Composite or S-Video
connections referred to in the following diagrams. Use the S-Video connections wherever
possible for the better video quality.
•CD Player to AVM 30 – see diagram in section 2.2.1
Connect the L/R audio output of the CD player to Analog Audio-In/CD on the AVM 30.
•DVD Player to AVM 30 – see diagram in section 2.2.2
Video: Connect the player’s composite video out to Composite Video-In/DVD on the AVM 30.
Audio: Connect the player’s digital audio output to Digital Audio-In/DVD on the AVM 30.
Make sure your DVD player’s setup menu is configured to output Dolby Digital and DTS material
as “Bitstream”, not “PCM”, otherwise 5.1-channel soundtracks will be turned into 2.0 channels!
•AVM 30 to TV – see diagrams in sections 2.2.2 and 2.2.3
Video: Connect Composite Video-Out/MAIN on the AVM 30 to the TV’s composite video input.
Audio: Connect the L/R audio output of the TV to Analog Audio-In/TV on the AVM 30.
•VCR to AVM 30 – see diagram in section 2.2.3
Video: Connect the VCR’s composite video output to Composite Video-In/VCR on the AVM 30.
To Record: Connect Composite Video-Out/VCR to the VCR’s composite video input.
Audio: Connect the L/R audio output of the VCR to Analog Audio-In/VCR on the AVM 30.
To Record: Connect Analog Audio-Out/VCR to the L/R audio input of the VCR.
•AVM 30 to Amplifier(s) – see diagrams in sections 2.2.4 and 2.2.5
From the AVM 30, connect Front-L, Front-R, Ctr1, Sur-L, Sur-R, Rear-L, and Rear-R Analog
Audio-Out to the Front-L, Front-R, Center, Sur-L, Sur-R, Rear-L, and Rear-R inputs of the
power amplifier(s). Follow the amplifier’s operating manual for connecting the speakers.
•AVM 30 to Powered Subwoofer – see diagrams in sections 2.2.4 and 2.2.5
Connect Analog Audio-Out/Sub1 to the subwoofer’s line/low level input.
Reconnect the power to all components and turn them on. To turn on the AVM 30, move the switch on the
rear panel to the ‘on’ position and then press the POWER – MAIN button on the front panel.
3

4
To Watch a DVD:
•Press DVD Source on the front panel of the AVM 30.
•Select the TV input that corresponds to the one that the AVM 30’s Composite Video-Out/MAIN is
plugged into.
•Place a DVD into the DVD player and press play. You should see the picture on your TV and hear
sound from your speakers. Adjust volume using the Master Control Knob on the AVM 30.
To Watch a Video Tape:
•Press VCR Source on the front panel of the AVM 30.
•With your TV’s remote control, select the input that the AVM 30’s Composite Video-Out/MAIN is
plugged into.
•Insert a tape into the VCR and press play. You should see the picture on your TV and hear sound
from your speakers. Use the AVM 30 Master Control Knob on the front panel to adjust volume.
To Listen to a CD:
•Press CD Source on the front panel of the AVM 30.
•Place a CD into the CD player and press play. You should hear music coming from your speakers.
Use the AVM 30 Master Control Knob on the front panel to adjust volume.
Note about Digital and Analog Inputs:
•You can change any input to Digital or Analog. Digital inputs use the AVM 30’s high-end digital to
analog converters and can be changed from RCA to Toslink or XLR connection. Analog inputs can
be set to Digital Signal Processing for bass management, bass/treble control, time alignment, and
surround modes, or Direct to bypass all digital stages. Auto-Dig uses the digital connection if a
digital signal is sensed, and automatically switches to analog connection if there is no digital
signal. For more information see sections 4.2.1 and 7.4.5.
Note about Your Speakers:
•The AVM 30 allows you to enter information about how many speakers you have in your system,
as well as their relative size, type, and distance from your listening position. This speaker setup
information is important in directing audio signals optimally, ensuring you get the best quality
sound from your system – see sections 7.4.2, 7.4.3, and 7.4.4.
2.2 CONNECTOR DIAGRAMS AND DESCRIPTIONS
The following pages of illustrations contain a variety of standard cable/connectors that are used to connect
components to your AVM 30. The various types, and what they are used for, are shown here:
2. QUICK START continued …
Analog Left
Channel
RCA Black or
White RCA Red RCA Yellow 5-Pin Mini DIN Toslink XLR Female
(connects to output)
XLR Male
(connects to input)
1/4” Stereo
Analog Right
Channel
Digital S/PDIF or
Composite Video
S-Video Digital Audio
S/PDIF
Analog Balanced
or Digital AES/EBU
Analog Balanced or
Digital AES/EBU
Headphone
3.5mm
Mini (Mono)
Relay Trigger
IR Emitter
RCA Green:
Component Y
RCA Blue:
Component Pb
RCA Red:
Component Pr

5
2. QUICK START continued …
2.2.1 CD Player to AVM 30
CD Player
EJECT
Track 1
CD Player Audio Out
RL
©©
©©

©©
©©
6
2.2.2 DVD Player and TV to AVM 30
2. QUICK START continued …
DVD
DVD Player
Composite
Video Out S-Video Out
Audio Out
RL
Digital Out
RCA Toslink
Component
Video Out
Pb
Y
Pr
Audio
Out
Composite
Video In Component
Video In
S-Video In
Vari Fixed
L
R
Pb
Pr
Y
Rear Panel of TV
CATV
In
Note:
For info on Component
Video use, see sections
4.3, 7.4.5, and 7.4.10

©©
©©
7
2.2.3 VCR and TV to AVM 30
2. QUICK START continued …
VCR
EJECT
VCR Audio
R
L
OUT IN
OUT
S-Video
Composite
IN
Video
Audio
Out
Composite
Video In Component
Video In
S-Video In
Vari Fixed
L
R
Pb
Pr
Y
Rear Panel of TV
CATV
In

©©
©©
8
P
O
W
E
R
2.2.4 AVM 30 to Amplifier and Powered Subwoofer (RCA)
2. QUICK START continued …
REAR
LEFT
INPUTS
FRONT
LEFT REAR
OUTPUT
+ -
LEFT SURROUND
OUTPUT
+ -
RIGHT REAR
OUTPUT
+ -
LEFT FRONT
OUTPUT
+ -
RIGHT SURROUND
OUTPUT
+ -
SURROUND
INPUTS
RIGHT
LEFT
CENTER
OUTPUT
+ -
RIGHT FRONT
OUTPUT
+ -
RIGHT
INPUTS
REAR
FRONT
CENTER
INPUT
NRTL/C
LR 103255
This product has been
certified by CSA.
CHASSIS
GROUND
~
AUTO
MANUAL
TRIGGER
ON MODES
INPUT
5-24V AC/DC
OUTPUT
TRIGGERS
MADE IN CANADA
THIS PRODUCT IS BUILT WITH
THE FOLLOWING PATENTS:
CDN. 2142644, U.S. 5636288
PVA 7
WARNING:
SHOCK HAZARD DO NOT OPEN.
AVERTISSEMENT:
RISQUE DE CHOC LECTRIQUE
NE PAS OUVRIR.
Powered Subwoofer
Level
RCA
Input
XLR

©©
©©
9
2. QUICK START continued …
2.2.5 AVM 30 to Amplifiers and Powered Subwoofer (XLR)
Trigger Setup Suggestion:
If it is not necessary to have both
amplifiers turned on when stereo
sources are playing, set triggers
to turn on only the 2-channel
amplifier when a stereo source is
selected (see section 7.4.9).
To powered
subwoofer

10
2
3
4
7
8
1
5
6
LAST
SLEEP
INPUT
FRTCTR
T
H
X
T
I
M
E
R
S
S
T
A
T
U
S
PIPSWAPMOVE
AVMSOURCE
COPY
AUXTAPE
DVDTVSATVCR
CD
DVDTVSATVCR
B
A
S
S
T
R
E
B
L
E
B
A
L
A
N
C
E
2-Ch
CD
REC
MAIN
Z2Z3
AVMPATH
D
Y
N
A
M
I
C
S
VOLUMECHPRE-SET
FM/AMPRE-SETS
SEEK
TUNE
SOURCESEEK
L
E
A
R
N
ENTER
MUTE
78
0
9
SELECT
SUB
LFE
FM
AM
SUR
RR
A
V
M
O
F
F
D
I
S
P
L
A
Y
T
O
N
E
B
Y
P
A
S
S
M
O
D
E
O
N
S
C
R
E
E
N
O
F
N
I
E
D
I
U
G
B
A
C
K
S
E
T
U
P
123
456
P
O
W
E
R
6-Ch
A
V
M
P
A
T
H
110˚ from center
LAST
SLEEP
INPUT
FRTCTR
T
H
X
T
I
M
E
R
S
S
T
A
T
U
S
PIPSWAPMOVE
AVMSOURCE
COPY
AUXTAPE
DVDTVSATVCR
CD
DVDTVSATVCR
B
A
S
S
T
R
E
B
L
E
B
A
L
A
N
C
E
2-Ch
CD
REC
MAIN
Z2Z3
AVMPATH
D
Y
N
A
M
I
C
S
VOLUMECHPRE-SET
FM/AMPRE-SETS
SEEK
TUNE
SOURCESEEK
L
E
A
R
N
ENTER
MUTE
78
0
9
SELECT
SUB
LFE
FM
AM
SUR
RR
A
V
M
O
F
F
D
I
S
P
L
A
Y
T
O
N
E
B
Y
P
A
S
S
M
O
D
E
O
N
S
C
R
E
E
N
O
F
N
I
E
D
I
U
G
B
A
C
K
S
E
T
U
P
123
456
P
O
W
E
R
6-Ch
A
V
M
P
A
T
H
*Dipole shown with ‘null’ facing listening area. Direct radiating – see diagram below.
For accurate soundstage reproduction, speaker size and distance to the listener should be entered in the
Setup Menu (see sections 7.4.2, 7.4.3, and 7.4.4).
1. Front-Left
2. Center
3. Front-Right
4. Surround-Right*
5. Rear-Right*
6. Rear-Left*
7. Surround-Left*
8. Subwoofer
2.3 SPEAKER PLACEMENT
These illustrations show the typical speaker placement for a 7.1-channel surround system, the ‘.1’ channel
being the LFE (Low Frequency Effect). The Front and Center speakers are directed towards the listener from
the front, while the Surround speakers are positioned to the sides, and the Rear speakers are positioned
behind the listener. Ideally, the Surround and Rear speakers should be positioned 2-3 feet above ear level.
2. QUICK START continued …
Surround Speaker Placement – Dipole Surround Speaker Placement – Direct Radiating
slightly behind listening position