antrax Datentechnik GmbH
General
The SwitchBox-comp allows switching ON and OFF of a electronic device by sing the ''composite
video signal".
Please read this man al caref lly and completely before initial operation, it describes the assigned
se and contains important information abo t the installation/operation of the SwitchBox-comp.
The man fact rer ass mes no liability for conseq ences of sage violation, all warranty claims
omitted.
Use of the SwitchBox-comp
The SwitchBox-comp is intended for switching of resistive and ind ctive loads p to max. 2000W
(230V / 8.5A) in dry and closed ho sing space and offices. Activation may only be set p by sing
the video or a dio signal ( p to max. 3VDC). Operating instr ctions of the connected electronic
devices and their safety reg lations m st be respected.
Safety Instructions
Do not open the SwitchBox-comp. It contains no parts to be serviced by yo .
Only se the SwitchBox-comp indoors and do not s bject the nit to moist re or h midity.
Only connect the SwitchBox-comp to properly installed 230V AC o tlets.
Only clean the exterior of the SwitchBox-comp with a dry cloth after npl gging it from the
electrical o tlet and removal of the interface cable.
Only clean the exterior of the SwitchBox-comp with a dry cloth after npl gging it from the
electrical o tlet and removal of the interface cable.
Do not se the SwitchBox-comp in areas sed by children
Do not connect the SwitchBox-comp to a comp ter that is already switched on. This can lead
to comp ter components becoming damaged or destroyed.
Do not se the SwitchBox-comp if one or several parts (case, cable, pl g) are damaged or
damage may be ca sed by its location (e.g., falling down).
The SwitchBox-comp may only be repaired by a thorized service personnel.
Only connect electrical appliances that have no limit to their switched-on time (i.e. all
connected electrical appliances m st be able to take contin o s c rrent witho t s staining
damage in the case of a defa lt to the permanently ''ON'' position).
- 2 -
Hasenbrink 4, 32052 Herford, Germany Tel. +49 (0) 5221 929660 Fax +49 (0) 5221 9296628