AnyNet AnyNet-12824 User manual

1
Version: 5.3
Doc No.: 2020031501

2
Table of Contents
About This Guide ------------------------------------------------------------------------------------------------- 4
FCC Compliance Statement------------------------------------------------------------------------------------ 4
FCC Warning ------------------------------------------------------------------------------------------------------ 4
License Agreement------------------------------------------------------------------------------------------------ 5
Trademark---------------------------------------------------------------------------------------------------------- 7
Customer Support ------------------------------------------------------------------------------------------------ 7
Chapter 1 Product Introduction ------------------------------------------------------------------------------- 8
1-1. Model Description --------------------------------------------------------------------------- 8
1-2. Product Package Content ------------------------------------------------------------------- 9
1-3. Recommend HDD List---------------------------------------------------------------------- 9
1-4. Product Overview--------------------------------------------------------------------------- 10
Chapter 2 Hardware Installation-----------------------------------------------------------------------------14
2-1. How to build up the Raid HDD function? -----------------------------------------------15
2-2. How to format the HDD from the NVR system? --------------------------------------- 20
2-3. How to rebuild the Raid HDD? ----------------------------------------------------------- 23
Chapter 3 NVR Operating System---------------------------------------------------------------------------25
3-1. NVR System Control Panel Configuration ---------------------------------------------- 26
3-2. NVR Main Program ------------------------------------------------------------------------ 37
3-3. Program Overview-------------------------------------------------------------------------- 38
Chapter 4 Operate Auto Number Plate Recognition System-------------------------------------------52
4-1. How to get the criteria to image for the ALPR system? -------------------------------- 52
4-2. How to install the camera for ALPR system? ------------------------------------------- 56
4-3. How to set up the parameters of the ALPR system? ------------------------------------ 57
4-4. How to White list and Blacklist of ALPR system?-------------------------------------- 62
Chapter 5 Operate Face Recognition System--------------------------------------------------------------71
5-1. What is QuickFace Facial Recognition System?---------------------------------------- 71
5-2. How to install the camera for the Face Recognition system? -------------------------- 73
5-3. How to set up the face recognition camera? ---------------------------------------------75
5-4. How to white list and blacklist of face recognition system? ---------------------------77

3
5-5. How to import the confidence value of face recognition?------------------------------89
5-6. The View log of face recognition --------------------------------------------------------- 90
5-7. Pop up the image of face recognition----------------------------------------------------- 94
Chapter 6 NVR Software Operation-------------------------------------------------------------------------95
6-1. Surveillance NVR/NVR (Witness Pro) -------------------------------------------------- 95
6-2. How to setup Fisheye camera for 360°/180° Panorama viewing-------------------- 101
6-3. Logging in the Witness Pro program --------------------------------------------------- 104
6-4. Camera configuration ------------------------------------------------------------------- 105
6-5. Video playback / Text insert playback / ezBackup ------------------------------------ 125
6-6. Remote Access setup --------------------------------------------------------------------- 141
6-7. System Configuration -------------------------------------------------------------------- 147
6-8. User access setup ------------------------------------------------------------------------- 156
6-9. Application logs--------------------------------------------------------------------------- 160
6-10. Peripherals setup------------------------------------------------------------------------- 162
6-11. Stop alarm siren ------------------------------------------------------------------------- 164
6-12. Storage configuration ------------------------------------------------------------------- 164
6-13. Public address configuration ----------------------------------------------------------- 168
6-14. Control Panel ---------------------------------------------------------------------------- 174
Chapter 7 Application Tools- ezTools ---------------------------------------------------------------------- 178
7-1. IP Camera Video transfer - ezVideoTrans---------------------------------------------- 178
7-2. IE Browse Server - EzWebServer------------------------------------------------------- 180
7-3. Remote control server – EzRServe ----------------------------------------------------- 183
7-4. 2 Way voice Communication – EzTalk------------------------------------------------- 186
7-5. Restart the computer schedule – EzReboot -------------------------------------------- 188
7-6. Auto-synchronized time - EzClock ----------------------------------------------------- 189
7-7. HDD Health Checkup - EzHDDSmart - ----------------------------------------------- 190
7-8. UPS utility - EzUPSCheck -------------------------------------------------------------- 193
7-9. Other Applications------------------------------------------------------------------------ 195

4
About This Guide
Conventions used in this guide to make sure that you perform certain tasks properly, take note of the following
symbols to use throughout this manual.
WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT Information that you must follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is su ject to the following two conditions: This
device may not cause harmful interference, and this device must accept any interference received, including
interference that may cause undesired operation.
FCC Warning
This equipment has een tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasona le protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can e determined y turning the equipment
off and on, the user is encouraged to try to correct the interference y one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation etween the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded ca les and I/O cords must e used for this equipment to comply with relevant FCC regulations.

5
License Agreement
Notice to end-user: please read the following legal agreement carefully. Use of the Witness or any of the software
provided with this agreement constitutes your acceptance of these terms. If you do not agree with the terms of
this agreement, PROMPTLY RETURN the Witness system, Witness, AnyView Pro and FreeView Pro, any
related software and the included items (including the Witness video system, written materials and containers) to
the location where you purchased them for a full refund.
1-1. License Grant. I-View grants to you (either as an individual or an entity) a personal, nonexclusive,
nontransferable license to use one copy of the executable code of the I-View's Witness, FreeView Pro and
AnyView Pro on a single CPU residing on your premises. The term of this Agreement will be for the duration
of I-View’s copyright in the Witness, FreeView Pro and AnyView Pro. You may assign your rights under this
Agreement to a third party who agrees in writing to be bound by this Agreement prior to the assignment, and
provided that you transfer all copies of the Witness, FreeView Pro and AnyView Pro and related
documentation to the third party or destroy any copies not transferred. Except as set forth above, you may not
assign your rights under this Agreement, nor shall you rent, lease, sell, sublicense or otherwise transfer the
Witness, FreeView Pro and AnyView Pro.
1-2. Reverse Engineering. You may not reverse engineer, decompile or otherwise disassemble the Witness,
FreeView Pro and AnyView Pro except to the extent that applicable law expressly prohibits this restriction.
1-3. Copyright. Title and full ownership rights to the I-View's Witness, FreeView Pro and AnyView Pro will
remain the exclusive property of I-View or its suppliers, and you will not acquire any rights to the I-View's
Witness, FreeView Pro and AnyView Pro except as expressly set forth above.
1-4. Maintenance. I-View is not obligated to provide maintenance or updates to you for the Witness system
and transport to Witness, FreeView Pro and AnyView Pro. However, any maintenance or updates by I-View
shall be covered by the Agreement.
1-5. Disclaimer of Warranty. I-View warrants that theWitness system, the witness FreeView Pro andAnyView
Pro and related software will perform substantially in accordance with the accompanying documentation and
those CD-ROM diskettes are free from any defects for a period of 90 days from the date of purchase (limited
warranty). Except for the foregoing limited warranty, I-View expressly disclaims any and all other
warranties, whether express or implied, including without limitation, the implied warranties of
merchantability, fitness for a particular purpose, and non-infringement of third party rights. If law does not
permit such disclaimer of any implied warranty, the duration of any such implied warranties is limited to 90

6
days from the date of purchase. Some countries do not allow the disclaimer of implied warranties, limitations
on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages,
so such limitation as or exclusions may not apply to you. This warranty gives you specific legal rights and
you may also have other rights, which vary, from state to state.
1-6. Customer Remedies. In the event the Witness system or related software does not meet or conform to the
Limited Warranty, I-View’s entire liability and your sole and exclusive remedy shall be, at I-View's option,
either to (a) correct the error, (b) help you work around or avoid the error or (c) authorize a refund so long as
the Witness system documentation and CD-ROM diskettes are returned to I-View with a copy of your receipt.
This Limited Warranty is void if failure of the Witness system has resulted from accident, abuse, or application.
Any replacement Witness system will be warranted for the remainder of the original warranty period.
1-7. No Liability for Consequential Damages. In no event shall its suppliers be liable to you for any incidental,
indirect, special or consequential damages of any kind rising out of or related to this agreement or use or
inability to use the related software, even if I-View has been advised of the possibility of such damages.
1-8. Please acknowledge that the laws and regulations of the Taiwan R. O. C. restrict the export and re-export of
commodities and technical data of Taiwan R. O. C. origin. You may not download or otherwise export or re-
export the Witness system or related software or any underlying information or technology except in full
compliance with all United States and other applicable laws and regulations. You agree to indemnify and hold
I-View harmless from and against any and all liability arising from or relating to your breach of this Manual.
1-9. Governing Law; attorneys' fees. The laws of the Taiwan R. O. C will govern this agreement. Without regard
to conflict of law principles. The R. O. C. Convention on Contracts for the International Sale of Goods is
specifically disclaimed. The prevailing party shall be entitled to recover its reasonable attorneys' fees in the
event of a dispute arising out of or relating to this Agreement.
1-10. Entire Agreement. This is the entire agreement between you and I-View with respect to the use of the
Witness, FreeView Pro and AnyView Pro, which supersedes any prior agreement, whether written, or oral,
and all other communications between the parties relating to the subject matter of this Agreement. Should you
have any questions concerning this Agreement, please contact I-View directly at one of the numbers or
addresses listed at the beginning of this manual.

7
Trademark
DigiCap II, DSecu, AnyNet, e-Witness, AnyNet, u-Witness XP, x-Witness, FreeView Pro, AnyView Pro,
PDAView, MobileView, QuickPark and QuickFace are registered trademarks of I-View Communication Inc.
Microsoft, Windows 95, 98, ME, Windows2000, XP, Vista and 7 are registered trademarks of Microsoft
Corporation. All other trademarks are the property of their respective holders.
Customer Support
If technical problems arise with the use of our products in which you and your vendor cannot resolve, please try
the following: If you have an Internet connection, visit the I-View website http://www.i-view.com.tw (Taiwan)
for any software or product updates, or email to [e-mail] (Taiwan) or Tel: [phone] Fax:
886-3-510-3002 (Taiwan). We are dedicated to providing the highest quality support. E-mailing our tech
support will give you the chance to document each of the above items in a very clear and concise manner and
will give our support team a chance to document any problems and respond with thoroughly researched answers.

8
Chapter 1 Product Introduction
1-1.Model Description
Model Description
AnyNet-1604 Lite 16 channels I-View’s IP devices and/or 16 channels third-party IP devices digital
video recorder provide up to 50TB HDD capa ility (10TB x5).
AnyNet-3204 Lite 32 channels I-View’s IP devices and/or 32 channels third-party IP devices digital
video recorder provide up to 50TB HDD capa ility (10TB x 5).
AnyNet-3204/1604 32/16 channels I-View’s IP devices and/or 32 /16channels third-party IP devices
digital video recorder provide 4 hot-swap SATA drive ays up to 40 TB HDD
capa ility (10TB x 4) with Raid 0, 1, 5,10 function.
AnyNet-3208/
AnyNet-6408
32/64 channels I-View’s IP devices and/or 32 /64 channels third-party IP devices
digital video recorder provide 8 hot-swap SATA drive ays up to 80 TB HDD
capa ility (10TB x 8) with Raid 0, 1, 5, 6,10 function.
AnyNet-6416/1616 64/16 channels I-View’s IP devices and/or 64/16 channels third-party IP devices
digital video recorder provide 16 hot-swap SATA drive ays up to 160 TB HDD
capa ility (10TB x16) with Raid 0, 1, 5, 6,10 function.
AnyNet-6424 64 channels I-View’s IP devices and/or 64 channels third-party IP devices digital
video recorder provide 24 hot-swap SATA drive ays up to 240 TB HDD
capa ility (10TB x24) with Raid 0, 1, 5, 6,10 function.
AnyNet-12824 128 channels I-View’s IP devices and/or 128 channels third-party IP devices
digital video recorder provide 24 hot-swap SATA drive ays up to 240 TB HDD
capa ility (10TB x24) with Raid 0, 1, 5, 6,10 function.
1. Redundancy Power supply and 4/6/8 monitors display is optional.
2. The maximum HDD writing speed cannot exceed 180 M/S for 4 Bays Raid NVR system and 250
M/S for 8 Bays NVR system. Please make sure the data size of system will over than the HDD
writing speed or not when you choose the Anynet-3204 or 6408 NVR
3. The most 7200RMB SAVAII/III HDD can capa ility with NVR. You can call your local dealer
efore uying the HDD; the Enterprise HDD is recommended.
4. We recommend using the same model HDD on a system when you use the Raid 5 or 6.

9
1-2.Product Package Content
Thank you for choosing the I-View Em edded NVR system. Before you start installing the
hardware devices with the NVR, please check the items of the product package with the list elow,
Recover USB Flash disk
User manual & Power cable
Screws for HDD installation
Mouse
If any of the a ove items is damaged or missing, contact your retailer.
1-3.Recommend HDD List
Seagate
Model Size Type
ST4000NM0035 4TB SATA 6 G /Sec.
ST6000NM0115 6TB SATA 6 G /Sec.
ST8000NM0055 8TB SATA 6 G /Sec.
ST10000NM0086 10TB SATA 6 G /Sec.
Western Digital
Model Size Type
WD4002FRYZ 4TB SATA 6 G /Sec.
WD6002FRYZ 6TB SATA 6 G /Sec.
WD8002FRYZ 8TB SATA 6 G /Sec.
WD101KRYZ 10TB SATA 6 G /Sec.

10
1-4. Product Overview
Front Panel of AnyNet Em edded NVR System
 Anynet-3208/6408/6416/6424 Rear Panel
1. DVD drive
2. Remove Hot swap HDD
3. USB 3.0 ports
4. Power Switch
5. System reset button
6. Alarm Mute button (Revised);
7. System HDD Activity indicator LED
8. Power indicator LED
9. Failed indicator LED (Revised)
10. LAN1 & LAN 2 indicator LED (Revised)
AnyNet-3208/6408
AnyNet-6416
AnyNet-6424
1 2 3 3 4 5 6 78 8 9 10

11
 Anynet-1604/3204/3208/6416/6424 Back Panel
1.Power supply: The power supply can be selected optional redundancy power supply.
2.Supplied power cord: Connect one end to the AC input.
3.Power switch: Turn on/off power supply.
4.PS2 keyboard/ mouse combo port: This port is for a PS2 keyboard/mouse.
5.USB port: For USB device plug in.
6.HDMI port: This port for HDMI monitor.
7.S/PDIF port: Audio output port..
8.VGA port: 15-pins ports for VGA monitor or device.
9.DVI-DL port: Support DVI-D Signal output only.
10.e-SATA port: Plug e-SATA devices.
11.RJ-45 LAN port#1: Connect to Switching HUB. The default IP address is 192.168.1.1
12.USB port: For USB device plug in.
13.Line in (Blue): This port connects to CD, DVD audio source. Speaker out (Lime): This port
connects to speaker. Microphone in (Pink): This port connects to microphone,
14.RJ-45 LAN port#2: Connect to Switching HUB. The default IP address is 192.168.0.1
AnyNet-3208/6408
1 2 345678 9 10 12 13 14
11
AnyNet-6416 AnyNet-6424/12824

12
 Anynet-1604/3204 Front Panel
Anynet-1604/0804 Lite Front Panel
1. Remove Hot swap HDD
2. Power Switch
3. System reset button
4. Power indicator LED
5. HDD indicator LED
6. USB 3.0 ports
11
5
2
3
6
6
4

13
Anynet-1604/3204/1604Lite /0804 Lite Back Panel
1.PS2 keyboard port: This port is for a PS2 keyboard.
2.DVI-DL port: Support DVI-D Signal output.
3.USB port: For USB2.0 device plug in.
4.USB port: For USB3.0 device plug in.
5.HDMI port: This port for HDMI monitor.
6.Line in (Blue): This port connects to CD, DVD audio source. Speaker out (Lime): This port
connects to speaker. Microphone in (Pink): This port connects to microphone,
7.Supplied power cord: Connect one end to the AC input.
8.Power switch: To turn on/off the power supply.
9.PS2 mouse port: This port is for a PS2 mouse.
10.RJ-45 LAN port#1: Connect to Switching HUB. The default IP address is 192.168.1.1
11.VGA port: 15-pins ports for VGA monitor or device.
9 10 11
1 2 345367 8

14
Chapter 2 Hardware Installation
Please use the HDD which supports 7200 RMP or a ove and the same model when you use the
Raid 5 or 6 mode.
 Install Hard Disk Drive
 Remove Hard Disk Drive
 Remove top cover of NVR
① Pull the lever to latch HDD tray.
② Slide tray from HDD tray.
① Remove protect tray from the tray.
② Insert the HDD on the tray.
③ Attach with 4 screws to fix HDD.
④ Push the lever to latch HDD tray.

① Release two screws on the back side and twp
screws on both left and right side.
② Thumb finger touch downward, and then push
back the rear back cover.
③ Put hand on the front top cover pull it out.

15
2-1.How to build up the Raid HDD function?
This process which you can setup the Raid card from Raid application Program, you can follow up the
steps as elow:
Click utton from Control panel of NVR to ena le the Raid setting diagram. As this process
which you can modify the Raid card setting from NVR’s O.S. (Operation System)
Step 1.Click the IP address and the default the IP address is 127.0.0.1, then enter the User name/
Password to click the “Login” icon. The default is admin/(No password) or Administrator/(No
password).
If you change the “administer account “ user name & password of Windows O.S., the Raid card
username/ password should e same as changed “administer account “.

16
Step 2. Select the ”Logical” section, then select “Virtual Device” item. Right-click Mouse and then
choice the “Set Virtual Drive Properties” icon.
Step 3. Setup Raid 5 or 6 or others mode, then Ctrl + HDD list to choose multi HDDs at a time. Click
the “ Add ” icon to select the HDDs on the listed.

17
Step 4. Click the “ Create Drive Group” icon and then click the “ Next ”.
Step 5. Check the parameters of setting same as below or not? If yes, please click the “Next“ icon.

18
Step 6. Click “Yes” to confirm the Raid parameters setting and then the Raid mode will show as below.

19
Step 7. Click the “ Finish” icon and “Ok” to confirm the Raid setting.

20
2-2. How to format the HDD from the NVR system?
You need to format the HDD from the NVR system when you use the Raid HDD or standard HDDs. The
O.S. of NVR is Embedded 7 and the format HDD processes the same as Windows 7. You can follow up
the process
Step 1. Click “ “ button from Control panel the diagram of HDD setting will pop up as below.
Move the Mouse to “Format“ icon and then right-click of Mouse, then check the “GPT” section
(If the HDD size bigger than 2TB) or MBR (HDD size less 2TB)and click “OK” start to format
the HDD.
Step 2. Click the “ New Simple Volume “ icon, then click the “ Next “ icon.