AOC 16T3E User manual
1
i
Safety............................................................................................................................................................................................1
National Conventions .....................................................................................................................................................1
Power................................................................................................................................................................................2
Installation .......................................................................................................................................................................3
Cleaning............................................................................................................................................................................4
Other.................................................................................................................................................................................5
Setup ............................................................................................................................................................................................6
Contents in Box...............................................................................................................................................................6
Adjusting Viewing Angle .................................................................................................................................................7
Connecting the Monitor .................................................................................................................................................8
Wall Mounting .................................................................................................................................................................9
Adjusting ................................................................................................................................................................................... 10
Hotkeys.......................................................................................................................................................................... 10
OSD Setting................................................................................................................................................................... 12
Luminance......................................................................................................................................................... 13
Color Setup ....................................................................................................................................................... 14
Picture Boost..................................................................................................................................................... 15
OSD Setup ......................................................................................................................................................... 16
Game Setting .................................................................................................................................................... 17
Extra................................................................................................................................................................... 18
Exit...................................................................................................................................................................... 19
LED Indicator ................................................................................................................................................................ 20
Troubleshoot ............................................................................................................................................................................ 21
Specication ............................................................................................................................................................................. 22
General Specication................................................................................................................................................... 22
Preset Display Modes .................................................................................................................................................. 23
Plug and Play ................................................................................................................................................................ 24
1
Safety
National Conventions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some
warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specic
presentation of the warning is mandated by regulatory authority.
2
Power
The monitor should be operated only from the type of power source indicated on the label. If you are not sure
of the type of power supplied to your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug
will t only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire
plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat
the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect
the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in re or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate
congured receptacles marked between 100-240V AC, Min. 5A.
The wall socket shall be installed near the equipment and shall be easily accessible.
3
Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure
a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended
by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product
and use mounting accessories recommended by the manufacturer. A product and cart combination should be
moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a re or
electric shock. Never spill liquids on the monitor.
Do not place the front of the product on the oor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the
kit instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence
overheating may cause a re or damage to the monitor.
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on
the stand:
Installed with stand
Installed with stand
Installed with stand
12 inches
30cm
4 inches
10cm
4 inches
10cm
4 inches
10cm
Leave at lease this much
space around the set
4
Cleaning
Clean the cabinet regularly with a water-dampened, soft cloth.
When cleaning use a soft cotton or microber cloth. The cloth should be damp and almost dry, do not allow
liquid into the case.
Please disconnect the power cord before cleaning the product.
5
Other
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and
contact a Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain.
Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
Do not knock or drop the monitor during operation or transportation.
6
Setup
Contents in Box
Quick Start Guide Warranty card
Protective casing Wall mount with screws
*
Monitor
*
USB C-C Cable
Adapter
*
Power Cable
*
Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC
branch oce for conrmation.
7
Adjusting Viewing Angle
You are able to adjust the monitor as below:
30°+
-
3°
30° +
-
3°
NOTE:
Do not touch the LCD screen when you change the angle. Touching the LCD screen may cause damage.
8
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
2
1
1. USBC
2. Power : Use adapter with CC is recommend.(Operation voltage from 12V to 20V.)
Connect to PC
1. Connect the power cord to the back of the display firmly.
2. Turn off your computer and unplug its power cable.
3. Connect the display signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your display into a nearby outlet.
5. Turn on your computer and display.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.
To protect equipment, always turn o the PC and LCD monitor before connecting.
NOTE1:Without connecting the DC-IN port, the display works only if the input of the source is over 5V/1A.
NOTE2: We recommend that the laptop plugs in with its own adapter when the display connects to the laptop.
9
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this
procedure. Follow these steps:
1. Follow the manufacturer’s instructions to assemble the wall mounting arm.
2. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the
back of the monitor.
3. Insert the 4 screws into the holes and tighten.
4. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions
on attaching it to the wall.
NOTE: VESA mounting screw holes are not available for all models, please check with the dealer or ocial
department of AOC.
10
Adjusting
Hotkeys
1 Menu/Enter
2 Clear Vision
3 Game Mode
4 Power/Exit
Menu/Enter
Press to display the OSD or conrm the selection.
Power
Press the Power button to turn on the monitor.
Game Mode
When there is no OSD, press game mode key to open game mode function, then press “ ” or “ ” key to select game
mode (FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the dierent game types.
Exit
When the OSD is active, this button acts as an exit key (to exit the OSD menu)
11
Clear Vision
1. When there is no OSD, Press the Clear Vision button to activate Clear Vision.
2. Use the “ ” or “ ” buttons to select between weak, medium, strong, or o settings. Default setting is always “o”.
3. Press and hold “ ” button for 5 seconds to activate the Clear Vision Demo, and a message of “Clear Vision
Demo: on” will be display on the screen for a duration of 5 seconds. Press Menu or Exit button, the message will
disappear. Press and hold “ ” button for 5 seconds again, Clear Vision Demo will be o.
Clear Vision function provides the best image viewing experience by converting low resolution and blurry images
into clear and vivid images.
Clear Vision
O
Adjust the Clear Vision
Weak
Medium
Strong
Clear Vision Demo On or O Disable or Enable Demo
12
OSD Setting
Basic and simple instruction on the control keys.
Luminance Color Setup Picture Boost OSD Setup ExitExtra
Contrast 50
Brightness 90
Eco Mode Standard
Gamma Gamma1
DCR Off
HDR Mode Off
Game Setting
1). Press the OK button to activate the OSD window.
2). Press DOWN or UP to navigate through the functions. Once the desired function is highlighted, press the
OK
button to activate it, press DOWN or UP to navigate through the sub-menu functions. Once the desired
function is highlighted, press
OK
button to activate it.
3). Press DOWN or UP to change the settings of the selected function. Press to exit. If you want to adjust
any other function, repeat steps 2-3.
4). OSD Lock Function: To lock the OSD, press and hold the
OK
MENU-button while the monitor is o and then
press power button to turn the monitor on. To un-lock the OSD - press and hold the
OK
MENU-button while
the monitor is o and then press power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is disable to adjust.
2). Eco Modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only one state
can exist.
13
Luminance
Luminance Color Setup Picture Boost OSD Setup ExitExtra
Contrast 50
Brightness 90
Eco Mode Standard
Gamma Gamma1
DCR Off
HDR Mode Off
Game Setting
Contrast 0-100 Contrast from Digital-register.
Brightness 0-100 Backlight Adjustment.
Eco Mode
Standard Standard Mode.
Text Text Mode.
Internet Internet Mode.
Game Game Mode.
Movie Movie Mode.
Sports Sports Mode.
Reading Reading Mode.
Gamma
Gamma1 Adjust to Gamma 1.
Gamma2 Adjust to Gamma 2.
Gamma3 Adjust to Gamma 3.
DCR
O Disable dynamic contrast ratio.
On Enable dynamic contrast ratio.
HDR Mode
O
Select HDR Mode.
HDR Picture
HDR Movie
HDR Game
Note:
When “HDR Mode” is set to “non-o”, the items “Contrast”, “Eco Mode”, “Gamma” cannot be adjusted.
14
Color Setup
Picture Boost OSD Setup ExitExtra
Luminance
Red 50
Green 50
Blue 45LowBlue Mode Off
Color Temp. Warm
Color Gamut Panel Native
Color Setup
Game Setting
DCB Demo Off
DCB Mode Off
Color Temp.
Warm Recall Warm Color Temperature from EEPROM.
Normal Recall Normal Color Temperature from EEPROM.
Cool Recall Cool Color Temperature from EEPROM.
User Recall SRGB Color Temperature from EEPROM.
Color Gamut Panel Native Standard color space panel.
sRGB sRGB color space.
LowBlue
Mode
Off
Decrease blue light wave by controlling color temperature.
Multimedia
Internet
Office
Reading
Red 0-100 Red gain from Digital-register.
Green 0-100 Green gain from Digital-register.
Blue 0-100 Blue gain from Digital-register.
DCB Mode
O Disable DCB Mode.
Full Enhance Enable Full Enhance Mode.
Nature Skin Enable Nature Skin Mode.
Green Field Enable Green Field Mode.
Sky-blue Enable Sky-blue Mode.
Auto Detect Enable AutoDetect Mode.
DCB Demo On or O Disable or Enable Demo.
Note:
When “HDR Mode” under “Luminance” is set to “non-o”, all items except “Color Gamut” are not adjustable under
“Color Setup”.
15
Picture Boost
Luminance
Brightness 50
Contrast 50
H. Position 0
V. Position 0
Bright Frame Off
Frame Size 14
Picture Boost Color Setup
OSD Setup ExitExtra
Game Setting
Bright Frame On or O Disable or Enable Bright Frame.
Frame Size 14-100 Adjust Frame Size.
Brightness 0-100 Adjust Frame Brightness.
Contrast 0-100 Adjust Frame Contrast.
H. position 0-100 Adjust Frame horizontal Position.
V. position 0-100 Adjust Frame vertical Position.
Note:
Adjust the brightness, contrast, and position of the Bright Frame for better viewing experience.
When “HDR Mode” under “Luminance” is set to “non-o”, all items under “Picture Boost” cannot be adjusted.
16
OSD Setup
ExitExtra
Luminance Color Setup
H. Position
50
V. Position
Transparence 25
Language English
Timeout 10 Break Reminder Off
OSD Setup Picture Boost
Game Setting
50
Language Select the OSD language.
Timeout 5-120 Adjust the OSD Timeout.
H. Position 0-100 Adjust the horizontal position of OSD.
V. Position 0-100 Adjust the vertical position of OSD.
Transparence 0-100 Adjust the transparence of OSD.
Break Reminder On or O Break reminder if the user continuously work for
more than 1hrs.
17
Game Setting
ExitExtra
Luminance Color Setup
Game Mode Off
Shadow Control
Picture Boost
Off
OSD Setup
Game Setting
50 Overdrive
DialPoint
Game Color 10
Off
Game Mode
O No optimization by Smart image game
FPS For playing FPS (First Person Shooters) games.
Improves dark theme black level details.
RTS For playing RTS (Real Time Strategy) games. Improves
the image quality.
Racing For playing Racing games, Provides fastest response
time and high color saturation.
Gamer 1 User’s preference settings saved as Gamer 1.
Gamer 2 User’s preference settings saved as Gamer 2.
Gamer 3 User’s preference settings saved as Gamer 3.
Shadow Control 0-100
Shadow Control Default is 50, then end-user can
adjust from 50 to 100 or 0 to increase contrast for
clear picture.
1. If picture is too dark to be saw the detail clearly,
adjusting from 50 to100 for clear picture.
2. If picture is too white to be saw the detail clearly,
adjusting from 50 to0 for clear picture
DialPoint On/ Off Show DialPoint OSD.
Game Color 0-20 Game Color will provide 0-20 level for adjusting
saturation to get better picture.
Overdrive
O
Adjust the response time.
Note: Overdrive is only available in 1920x1080@60Hz.
Weak
Medium
Strong
Note:
When “HDR Mode” under “Luminance” is set to “non-o”, the items “Game Mode”, “Shadow Control”, “Game Color”
cannot be adjusted.
18
Extra
Picture Boost OSD SetupExit
Luminance Color Setup
Image Ratio Wide
Off Timer 00 DDC/CI Yes
Reset No
Resolution : 1920x1080
H. Frequency : 67 KHz
V. Frequency : 60 Hz
Extra Game Setting
O timer 0-24hrs Select DC o time.
Image Ratio
Wide
Select image ratio for display.
4:3
DDC/CI Yes or No Turn On/O DDC/CI Support.
Reset ENERGY STAR® or No Reset the menu to default.
Table of contents
Other AOC Monitor manuals
