1 2
3 4
5
Loosen the 4 screws of beam using 4MM hex spanner, adjust the beam to proper position
to fit the desktop
Connect the control box to the handset and to the motor
4mm Hex Spanner
Foot Pad 4PCS
2
3
4
5
8
9
7
6
5
4
3
2
1
10
Parts and Tools list
NO.
11
12
13
Qty NO. Qty
Lifting System 1set
Foot Pad 4
Bracket 2
Assembly Instructions
Foot Margin 2
14
4mm Hex Spanner
4mm Hex Spanner
verturn frame and attach brackets to beam using 4 of M6*12 screws,and then fit
the rubber cushions to the brackets and beams
Name Name
6 7
8
M6*10 Screw
Support Beam 1
8
4mm ex Spanner 1
8
M6*12 screw 8PCS
Attach legs to the beam using 8 of M6*12 screws
6
M8*16 Screw
9 10 11
M6*12 Screw 12
15mm ex Spanner
M8*16 screw 8PCS
5mm Hex Spanner
Attach feet to the legs using 8 of M8*16 screws, attach the 4 of levelling foot pads
to the feet by hand
ST3.5*19 screw 2PCS
ST4.8*19 screw 2PCS
M6*16 Screw 2PCS or
or
M6*16 Screw 2PCS
Rubber Cushion 10PCS
Rubber Cushion 10
M6*16 Screw 4
1
ST3.5*19 Screw 2
ST4.8*19 Screw 12
14
1312
M6*12 screw 4PCS
Attach the control box to the underside of the desktop using 12 of ST4.8 self-tapping
scerws,attach handset to the underside of desktop using 2 of ST3.5 self-tapping screws.
（
you can
use the self tapping screw or in case of inserts use the M6*16 screw
）
ST4.8*19 screw 2PCS
ST4.8*19 screw 4PCS
ST4.8*19 screw 4PCS
