AP AP-CC5 User manual

Date: 01-01-15 PNEG-1326
Instructions
1004 East Illinois Street • Assumption, IL 62510 • 1-217-226-4421
PNEG-1326
Printed in the U.S.A.
Copyright © 2015 by The GSI Group, LLC
www.gsiag.com
Page 1 of 2
CN-315800
Chore Cart Assembly (AP-CC5)
STEP 1:
Attach frame tubes to Chore Cart tub using four (4) 5/16"-18 x 1" elevator bolts.
STEP 2A:
Secure the caster wheels to the caster bracket using two (2) 5/16"-18 x 3/4" bolts per side through the outer
most holes. Mount caster bracket to frame tube assembly with two (2) 5/16"-18 x 2" bolts per side
through casters. (
NOTE : 2" Bolts must go through caster wheels, caster bracket, and frame tube assembly.)
STEP 2B:
Mount axle bracket to frame tube assembly using two (2) 5/16"-18 x 2" bolts.
Figure 1 Figure 2
STEP 3:
Install axle rod through axle bracket. Slide both wheels onto axle rod. Install one (1) 5/8" flat washer on
each side of the wheel and one (1) cotter pin on the axle.
Figure 3
1
2A
2B
3

Page 2 of 2 PNEG-1326
Chore Cart Assembly (AP-CC5)
Chore Cart Assembly
Ref # Part # Description Qty
1AP-CC5T Chore Cart Tub 1
2 AP-CC5F Chore Cart Frame Tube 2
3AP-CC5CB Chore Cart Caster Bracket 1
4 AP-CC5AB Chore Cart Axle Bracket 1
5AP-CC5A Axle Chore Cart 1
6 S-7082 Bolt Elevator 5/16"-18 x 1" ZN Grade 2 4
7S-1147 Lock Washer Split 5/16" ZN 14
8 S-396 Hex Nut 5/16"-18 YDP Grade 2 14
9AP-CC56C Chore Cart, 6" Caster 2
10 S-275 Bolt HH Bin 5/16"-18 x 3/4" YDP Grade 5 4
11 S-7084 Flat Washer 5/8" SS 4
12 AP-4593 Chore Cart 10" Wheel 2
13 S-4322 Cotter Pin 3/32" x 1" ZN Grade 2 2
14 S-845 Flat Washer 5/16" USS SAE YDP Grade 2 6
15 S-948 Bolt HHCS 5/16"-18 x 2" ZN Grade 8 6