VEVOR SC01 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
FURNITURE DOLLIES
MODEL: SC01 / SC02
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

MODEL: SC01 / SC02
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
FURNITURE DOLLIES

SAFETY INSTRUCTIONS
WARNING:
1. Please do not put it near flammable materials.
2. It is forbidden to carry people under any condition.
3. This product cannot be used to go up or down stairs.
4. Overload is strictly prohibited.
5. Don't move too fast when passing pothole areas.
SAVE THESE INSTRUCTIONS
MODEL AND PARAMETERS
Model
Photo
PARAMETERS
SC01
1-pack
Material: Wood
Size (single): 750x455x130 mm
Load Capacity:
1. The normal load of each furniture
dolly is 660 pounds, and the maximum
load does not exceed 1,000 pounds.
2. It is impossible to use two furniture
trolleys to carry the same piece of
furniture at the same time.
SC02
2-pack

ASSEMBLY & INSTALLATION
1. Unscrew all nuts.
2. Put together 4 pieces of wood.
3. Install the wheels and tighten the nuts.

MAINTENANCE
1. Avoid prolonged exposure to the sun to avoid aging.
2. Inspect accessories for wear, cracks and other damage before use, and
replace defective accessories immediately.
Sanven Technology Ltd.
Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Made In China

Technical Support and E-Warranty Certificate
www.vevor.com/support