Vivo CART-PC02S User manual

Black Adjustable Strap CPU Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-pc02s
SKU: CART-PC02S
[email protected]om www.vivo-us. 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS: FLOOR
STEP 1
Assemble casters (E) to mount (A) using
M4x4 bolts (F), and tighten with a Phillips
screwdriver.
PACKAGE CONTENTS
TOOLS NEEDED
22lbs
(9.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Mount
B(x4)
So Pad
C(x8)
M4x16
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
Drill
D(x2)
Cable Tie
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
E(x4)
Caster
F(x16)
M4x4
STEP 2
Stick so pads (B) to floor of mount (A).
STEP 3
Place CPU in mount (A) and adjust straps to
secure CPU in place.
TightenLoosen
WARNING: If strap gets stuck and won’t continue
to easily pull through while tightening, STOP and
either loosen strap slightly or pull slack through
clip before continuing to tighten. Failure to do so
may result in breaking the plastic clip.

3
STEP 4
Use cable ties (D) to bundle excess strap length.
ASSEMBLY STEPS: UNDER DESK
STEP 1
STEP 2
Using a 1/16” bit, drill 3/8” deep mounting holes
in desk. Attach mount (A) to marked locations
using screws (C) and a Phillips screwdriver.
a
66.7mm 66.7mm 66.7mm
66.7mm 66.7mm 66.7mm
a
x4
STEP 4
Attach CPU to mount (A) making sure base pads
are placed in middle of CPU bottom. Adjust straps
to secure CPU in place.
STEP 5
Use cable ties (D) to bundle excess strap length.
base pad
TightenLoosen
Place mount (A) on top of CPU and measure distance “a” between mounting holes using a tape
measure. Use mount and measurement to mark drilling locations under desk.
STEP 3
Stick so pads (B) to mount (A) as shown in
diagram.
WARNING: If strap gets stuck and won’t continue to easily
pull through while tightening, STOP and either loosen
strap slightly or pull slack through clip before continuing
to tighten. Failure to do so may result in breaking the
plastic clip.

LAST UPDATED: 03/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303