Tennsco Modular Cart Top Component Assembly Instruction Manual

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!
READINSTRUCTIONSCAREFULLYBEFOREATTEMPTINGTOASSEMBLETHEPACKINGTABLE
ASSEMBLY INSTRUCTIONS & PARTS MANUAL #2210709
Tennsco Corp., Dickson, TN 37056-1888 • [phone]
Modular Cart Top Component Assembly
Fits Models:MB-3-2545, MB-4-2545, MB-5-2545,
MB-6-2545, MB-8-2545, MB-9-2545
LIMITED WARRANTY
Tennscowarrantsgoodspurchasedhereundertobefreeofdefectsinmaterialsandworkmanshipforaperiodofone(1)yearfromthedateofshipment,hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by
persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.
UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS
AT SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR
OTHERWISE.
NOGOODS ACCEPTEDFOR RETURNWITHOUT PRIORAPPROVAL. Seller shallhave theright toinspect anygoods claimedto bedefective atBuyersplace
of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne
by Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.
TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888
[phone] or [phone] (toll free)
Website: www.tennsco.com E-mail: [email protected]
Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.
For safety, wear a pair of work gloves when assembling or performing any maintenance on packing table.
NOTE: Instructions refer
to top component as-
sembly only; mobile
workbench not included.

Top Component Assembly
Tools required one 4-way screwdriver and one 7/16” wrench
Steel Top is shown without Mobile Cart assembly for clarity.
2
4
1
3
1. Bolt Back Rail (Ref. No. 4)
to underside of Steel Top
with two 1/4-20 bolts.
2. Attach Side Plate (Ref.
No. 2) to side of Steel
Top (Ref. No. 1) using
four 1/4-20 bolts. The
Side Plate fits between
the Back Rail end flange
and steel top.
3. Attach Handle (Ref. No. 3) to
side of top using four 1/4-20
bolts. The Back Rail fits
between Handle and steel top.
4. If you purchased the optional
Electronic Riser proceed to
Step 5.
If not, attach the Side Rail and
the Handle to the Back Rail
using four 1/4-20 bolts and nuts.

6
5
5
Optional Electronic Riser
5. Attach Electronic Top Assembly
(Ref. No. 6) to Risers (Ref. No. 5)
using four 1/4-20 bolts and nuts.
Then place entire assembly on
surface of steel top.
6. Secure top assembly to
the workbench by
attaching the risers to
both the side plate and
the handle, using four
1/4-20 bolts and nuts
on each side.

PARTS LIST
1 Steel Top S25ww * 1 1
2 Side/End Plate SP-25 1 1
3 Handle MH-25 1 1
4 Back Rail BR-wwdd * 1 1
5 Riser WBRS-1 2 2
6 Electronic Shelf EWWT-45 1 1
7 1/4-20 x 5/8 Bolt ---- 14 14
8 1/4-20 nut ---- 4 4
REF.NO. DESCRIPTION PARTNO.
* Part No. is composed of prefix shown plus combination of unit width = ww.
** Part No. is composed of prefix shown plus combination of unit width = ww and depth = dd.
30" Wide Unit
2
1
3
5
54
6
45" Wide Unit
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, please contact your purchase location.
49B221