Apantac HDM2.0-4x2 User manual

4 x 2 UHD Matrix
(4K@60, 4:4:4)
USER MANUAL
HDM2.0-4x2
USER MANUAL v.1.0
Overview
HDM2.0-4x2 is a UHD (HDMI 2.0) 4x2 matrix. It provides high prefoance video and
audio to up UHD (4K)@60Hz, 4:4:4 and supports for EDID selection modes.
Package Contents
§ 1 x HDM2.0-4x2
§ 1 x User manual
§ 1 x Power adapter DC12V with lock
§ 1 x IR Receiver
§ 1 x Remote contol
Features
n Supports resolution up to UHD@60Hz (4:4:4)
n Supports pixel clock up to 600MHz
n Supports HDR
n HDCP 2.4/2.2 compliant
n Supports 3D pass-through
n Suppors RS232 control
n Supports remote control
n Supports firmware upgrade
n Support Link rate HBR2/HBR/RBR.
n Support SST and MST mode.
n Compliant with DisplayPort 1, 2, or 4 lanes.
Specifications
Function
HDM2.0-4x2
HDMI Output
2
HDMI Input
4
RS232
DB9 x 1
IR inout
3.5 mm stereo jack x 1
Output 1 status LED
4
Output 2 status LED
4
Selection keys
2
Max Resolution
UHD@60Hz (4:4:4, 8 bit)/(4:2:0, 12bit)
HDCP compliance
HDCP 1.4/2.2
Audio support via HDMI
LPCM, Dolby True HD, Dolby Digital/Plus/EX, DTS,
DTS-HD
HDMI cable reach
10m
Power Supply
12V 1A DC
Weight
686g
Dimension (LxWxH)
152 x 114 x 25 mm
All manuals and user guides at all-guides.com
all-guides.com

Weight
310g
Dimensions (LxWxH)
156x83x25mm
FRONT VIEW
1. RS-232 port
2. IR In
3. Reset Key
4. Mode key
Pin 1
Pin 2
EDID Mode
OFF
OFF
Full HD
OFF
ON
COPY EDID from port 1
ON
OFF
Reserved
ON
ON
UHD EDID
5. Select keys
6. Input status LEDs
REAR VIEW
1. Power jack 12V DC
2. HDMI outputs
3. HDMI inputs
RS232 Protocol
• Baud Rate: 115,200, n parity bit, 8 data bits, 1 stop bit
• ASCII
• Execute command with ‘\r” (carriage return)
Command
Description
help
Display help information
reset
Reset the device
info
Display device information
status
Display device status
r
Set routing status
rs
Display routing status
save
Save the current stings to preset
load
Load setting from preset
edid
Select input EDID mode
*For more information, type ‘h’ or ‘?’ following each command
Installation
1. Connect the HDMI cable to the source and the <IN> ports
2. Connect the HDMI cable to a UHD display and the <OUT> ports
3. Connect the power cord
4. Turn on source and display
1.
© 2019 APANTAC LLC. All rights reserved
10200 SW Allen Blvd, Suite C
Beaverton, OR 97005, USA
PHONE [phone]
FAX [phone]
The content of this document is provided in connection with Apantac LLC (“Apantac”) products. Apantac
makes no representation or warranties with respect to the accuracy or completeness of the contents of this
publication and reserves the right to make changes to specification and product descriptions at any time
without notice
All manuals and user guides at all-guides.com