Uber Appliance Uber Cook Quick Start Guide
Let’s start with the first button all the way to the left. This button displays a green "P". This is the
pressure button. This button is used to control the amount of pressure you desire when you are
using a function that utilizes pressure during the cooking cycle (Hint: The chicken/meat, soup
and steam options all utilize pressure. The Stew, oven and deep fry option do not use pressure.).
This button is used after you choose which function you need, so we will get back to that when I
am explaining the other buttons.
All the way on the right is a larger red "T". This is the temperature button. It is similar to the
pressure button, as it controls the desired temperature of the function you choose. I will also
cover this when I go over each function separately.
Now, let’s go over the functions:
Adjusting time, pressure and temperature:
To add or decrease time, you can use the two large buttons near the LCD display. the button to
the left will decrease the time, the button to the right will increase the time. Next, to increase
pressure, press the green "P" button. Each press will increase the pressure setting by one
increment. You can monitor the pressure setting level using the bottom of the LCD screen. There
is a green meter with 3 levels of pressure. These levels correspond to low, medium and high
pressure. You can keep pressing the green "P" button till you reach the desired pressure. If you
keep pressing the button, you will cycle between low, medium, high then back to low again.
Once you select the desired pressure setting, now you can set the temperature. Setting the
temperature is very similar to setting the pressure. You press the red "T" button till you reach the
desired temperature. You can monitor the temperature setting using the red meter at the top of
the LCD screen. This meter will read out the temperature setting in degrees. Keep pressing the
"T" button to cycle through the temperature ranges. Similar to the pressure button, the
temperature button will keep cycling through the readings until you reach the max level, then it
will start over again from the lowest level. Once you select your desired temperature and
pressure, you can press the large "cooking" button in the center to start cooking. To Cancel
cooking, press the “Cancel” Button to the left of the LCD screen. Once a cooking function is
canceled, you can choose any other cooking functions and set the desired specifications.
Chicken/meat function:
The first function from the left hand side is the Chicken/Meat function. This functions is the
basic pressure cooker function for meats and chicken. When you press the function, the
temperature, pressure and time will all be pre-set. You can change all of these parameters as you
wish.
