Apricorn Aegis Padlock User manual

Aegis Padlock
Quick Start Guide
0
cancel
2
abc
5
jkl6 mno
9
wxyz
8
tuv
7
pqrs
4
ghi
3
def
1
12
33
1
2
Cancel button
button
LED Indicator light
Remember to save your password in a safe place. If
lost or forgotten, there is no way to access the drive.
If you are having diculty please refer to the com-
plete user’s manual which is loaded on your Aegis
Padlock drive and is also available at Apricorn’s
website at: www.apricorn.com/support
Your Aegis Padlock is preformatted in NTFS for Windows®and is ready for use. For the Mac OS
please refer to the directions on the reverse to reformat your drive to a compatible format.
To access the Aegis Padlock plug your drive into a powered USB port, enter the default PIN
number of 123456 and press .
The indicator light will change from RED to GREEN indicating the drive is unlocked and can be accessed.
Changing the ADMIN PIN number to your own unique PIN number
You are the“administrator” of this drive. The rst thing you will want to do is change the
Administrator PIN number from the default 123456 to a unique, secure PIN number that you
will remember.
To change the Admin PIN number follow the instructions below:
To enter Admin Mode, rst plug the drive into the USB port and wait until the LED light
1.
turns RED.
Next, press and hold 0 + for 5 seconds until the LED light ashes RED.
2.
Enter the Admin PIN number (default is 123456) and press . The LED light will turn3.
BLUE indicating you are in Admin Mode.
While in Admin Mode, press and hold 9 + until the LED light ashes BLUE.
4.
Enter the new PIN number (minimum 6 digits) and press . The LED light will ash5.
GREEN 3 times if successful.
Re-enter the new PIN number and press . The LED light will stay solid GREEN for 2
6.
seconds then solid BLUE indicating you have successfully changed the Admin PIN.
To exit admin mode and begin using your Aegis Padlock drive, press the CANCEL
7.
button until the LED turns RED. Now enter your new PIN number and press .

Aegis Padlock Setup for Mac OS®
Your Aegis Padlock is preformatted in NTFS for Windows®. To reformat the
drive to a Mac compatible format please read the below.
Once the drive is unlocked, open Disk Utility from Applications/
Utilities/Disk Utilities.
To format the Aegis Padlock:
Select the Aegis Padlock from the list of drives and volumes. Each drive1. in the list will display its capacity, manufacturer, and product name,
such as 232.9 Apricorn Padlock.
Click the ‘Erase’ tab.2. Enter a name for the drive. The default name is Untitled. The drive’s3. name will eventually appear on the desktop.
Select a volume format to use. The Volume Format dropdown4. menu lists the available drive formats that the Mac supports. The
recommended format type is ‘Mac OS Extended (Journaled).’
Click the ‘Erase’ button. Disk Utility will unmount the volume from the5. desktop, erase it, and then remount it on the desktop.
Your Aegis Padlock is now formatted and ready to use. To change your
ADMIN PIN please refer to the directions on the previous page.
Apricorn provides the following helpful resources for you:
1. Apricorn’s Website (http://www.apricorn.com)
This gives you the ability to check for up-to-date information.
2. E-mail us at [email protected]
3. Or call the Technical Support Department at 1-800-458-5448.
Apricorn’s Technical Support Specialists are available from 8:00 a.m. to
5:00 p.m., Pacic Standard Time, Monday through Friday.
Technical Support
© Apricorn, Inc. 2010. All rights reserved.
12191 Kirkham Road
Poway, CA, U.S.A. 92064