asecos Q Series User manual

11
EP.V. 10367
10/2013
10 JAHRE GARANTIE*
* Bei jährlicher Beauftragung des
Premium Q-Tarifs verlängert sich
die Garantie für Ihren Q-LINE
Sicherheitsschrank auf bis zu 10 Jahre.
10 YEARS WARRANTY*
* Upon conclusion of an asecos
service and maintenance agreement
(PREMIUM Q tariff), you will get
a warranty extension for up to 10 years for
your Q-LINE safety storage cabinet.
5 JAHRE GARANTIE*
* Bei Abschluss eines BASICPlus-
Vertrages, mit fester 5-jähriger
Laufzeit, genießen Sie 5 Jahre
Garantie für Ihren Sicherheitsschrank.
5 YEARS WARRANTY*
*Upon conclusion of an asecos ser-
vice and maintenance agreement
(BasicPlus tari) with a fixed
term of 5 years, you will get a war-
ranty extension for a maximum of 5
years for your safety storage cabinet.
Weitere Informationen zu unseren Garantieleistungen finden Sie unter
www.asecos.com/service-leistungen
For detailed information about our warranties please visit
www.asecos.com/service-conditions
EP.V.10367 · 11/2017
BEDIENUNGSANLEITUNG
Sicherheitsschränke nach EN 14470-1 & EN 14470-2
USER MANUAL
Safety storage cabinets (EN 14470-1 & EN 14470-2)
GEBRUIKSAANWIJZING
Brandveiligheidsopslagkasten EN 14470-1 & EN 14470-2
NOTICE D´UTILISATION
Amoires de sécurite d´aprés EN 14470-1 & EN 14470-2
MANUAL DE INSTRUCCIONES
Armarios de seguridad EN 14470-1 & EN 14470-2
ISTRUZIONI PER L´USO
Armadi di sicurezza EN 14470-1 & EN 14470-2
INSTRUÇÕES DE SERVIÇO
Armários de segurança EN 14470-1 & 14470-2

XL-CLASSIC-90
XL90.222.155.WDAS
XL90.222.110.WDAS
S-CLASSIC-15
S15.197.120
S15.197.060
S15.197.060.R
S-CLASSIC-30
S30.197.120
S30.197.060
S30.197.060.R
S-CLASSIC-60
S60.196.120
S60.196.060
S60.196.060.R
S-CLASSIC-90
S90.196.120
S90.196.120.MV
S90.196.090
S90.196.060
S90.196.060.R
S90.129.120
S90.129.060
S90.129.060.R
S90.196.120.WDAS
S90.196.120.MV.WDAS
S90.196.090.WDAS
S90.196.060.WDAS
S90.196.060.WDASR
S90.129.120.WDAS
S90.129.060.WDAS
S90.129.060.WDASR
S-PEGASUS-90
S90.196.120.WDEU
S90.196.090.WDEU
S90.129.120.WDEU
S90.196.120.WDAC
S90.196.120.MV.WDAC
S90.196.090.WDAC
S90.196.060.WDAC
S90.196.060.WDACR
S90.129.120.WDAC
S90.129.060.WDAC
S90.129.060.WDACR
S-PHOENIX-30
S90.197.120.FDAS
S90.197.060.FDAS
S90.197.060.FDASR
S-PHOENIX-90
S90.196.120.FDAS
S90.196.120.MV.FDAS
S90.196.090.FDAS
S90.196.060.FDAS
S90.196.060.FDASR
S90.196.060.075.FDAS
S90.196.060.075.FDASR
S-PHOENIX Vol.2-90
S90.196.120.FDEU
S90.196.120.FDAC
S90.196.120.MV.FDAC
S90.196.060.FDAC
S90.196.060.FDACR
S90.196.060.075.FDAC
S90.196.060.075.FDACR
S-PHOENIX touchless-90
S90.196.120.FDAO
S90.196.060.FDAO
S90.196.060.075.FDAO
Q-CLASSIC-15
Q15.195.116
Q15.195.056
Q15.195.056.R
Q-CLASSIC-30
Q30.195.116
Q30.195.086
Q30.195.056
Q30.195.056.R
Q-CLASSIC-90
Q90.195.120
Q90.195.120.MV
Q90.195.120.MM
Q90.195.090
Q90.195.060
Q90.195.060.R
Q-PEGASUS-90
Q90.195.120.WDAC
Q90.195.090.WDAC
Q90.195.060.WDAC
Q90.195.060.WDACR
Q-PHOENIX-90
Q90.195.120.FD

K-PHOENIX-30
K30.197.120.MV.F WAS
K30.197.120.MC.FWAS
K-CLASSIC-90
K90.196.120.MV.WDAS
K90.196.060.MH.WDAS
K-PHOENIX-90
K90.196.120.MF.F WAS
K90.196.120.MC.F WAS
K90.196.120.MV.FDAS
K90.196.060.MH.FDAS
K-PHOENIX Vol. 2-90
K90.196.120.MF.F WAC
K90.196.120.MC.F WDAC
K-UB-90
K90.060.140.050.UB.ST
K90.060.140.050.UB.3T
K90.060.110.050.UB.ST
K90.060.110.050.UB.2T
G-CLASSIC-30
G30.205.140
G30.205.120
G30.205.090
G30.205.060
G30.205.060.R
G-ULTIMATE-90
G90.205.140
G90.205.120
G90.205.090
G90.205.060
G90.205.060.R
G90.205.060.2F
G90.205.060.2F.R
G90.145.060
G90.145.060.R
UB-T-30
UB30.060.110.2T
UB-S-30
UB30.060.140.2S
UB30.060.110.2S
UB30.060.110.S
UB-S-90K
UB90.060.110.KU.S
UB-S-90
UB90.060.059.050.S
UB90.060.059.PZ.S
UB90.060.059.S
UB90.060.059.S:0103
UB90.060.089.050.S
UB90.060.089.PZ.S
UB90.060.089.S
UB90.060.089.S:0103
UB90.060.110.050.2S
UB90.060.110.050.S
UB90.060.110.2S
UB90.060.110.2S:0103
UB90.060.110.PZ.2S
UB90.060.110.S
UB90.060.110.S:0103
UB90.060.140.050.2S
UB90.060.140.2S
UB90.060.140.2S:0103
UB90.060.140.PZ.2S
UB90.066.110.S
UB90.068.059.S:0101
UB90.068.089.S
UB90.068.089.S:0101
UB90.068.110.2S
UB90.068.110.2S:0101
UB90.068.140.2S:0101
UB90.080.059.060.S
UB90.080.110.060.2S
UB-T-90
UB90.060.059.050.T
UB90.060.110.2T
UB90.060.110.2T
UB90.068.110.2T:0101
UB90.068.110.2T
UB90.060.110.2T:0103
UB90.080.110.075.2T
UB90.080.110.075.2T:0301
UB90.060.110.050.2T:0701
UB90.060.110.050.2T
UB90.060.089.2T
UB90.060.089.050.2T
UB90.060.059.T:0601
UB90.060.059.T:0011
UB90.060.059.T
UB90.060.059.PZ.T
UB90.060.059.T:0103
UB90.052.059.TR
UB90.060.059.TR
UB90.060.059.PZ.TR
UB90.060.059.TR:0103
UB90.060.059.050.TR
UB90.080.059.060.T
UB90.080.059.060.TR
UB-ST-90
UB90.060.110.050.ST
UB90.060.110.ST
UB90.060.110.ST:0103
UB90.060.140.050.S2T
UB90.060.140.S2T
UB90.060.140.S2T:0103
UB90.067.140.S2T
UB90.068.140.S2T:0101
DE
EN
NL
FR
ES
IT
PT
2
1

44
IHRE PERSÖNLICHE DOKUMENTATION ZUM asecosSICHERHEITSSCHRANK
Sehr geehrte Kundin, sehr geehrter Kunde,
mit dem Kauf Ihres asecos-Sicherheitsschrankes haben Sie eine entscheidende Investition für
die Sicherheit in Ihrem Haus getätigt. Vor Ihnen steht ein innovatives Produkt aus hochwertigen
Materialien, das höchste Qualität garantiert.
Sicherheitsschränke aus dem Hause asecos verfügen über eine lückenlose Zulassungs-Dokumen-
tation. Wir archivieren Ihre Zulassungsdokumente jedes einzelnen Schrankes für Sie, bis Sie diese
im Bedarfsfall (z. B. einer Betriebsbegehung o. ä.) mit diesem Formular von uns anfordern.
Dazu einfach dieses Formular heraustrennen/kopieren und mit Ihrer Adresse und der Seriennum-
mer des Schrankes versehen per Fax zurück an uns.
Mit freundlichen Grüßen
asecos GmbH
YOUR PERSONAL DOCUMENTATION TO THE asecos SAFETY CABINET
Dear Customer,
you have made a decisive investment in safety for your company by purchasing this asecos safety
storage cabinet. You now own an innovative product made of top-quality materials guaranteeing
the highest quality standards.
asecos safety storage cabinets have complete authorisation documents. We archive the authori-
sation documents for every individual cabinet, keeping them ready for you should you ever need
them (e.g. for a works inspection or similar). Simply request them using this form.
Tear o or copy that page and return to us by fax with your address and serial number of the
cabinet on it.
Yours sincerely
asecos GmbH
Firma • company
Abteilung • department
Name • name
Straße • street
PLZ • postal code
Ort • city
Schrank • cabinet
Seriennummer(n) • serial number(s)
asecos GmbH
Abt. Kundendienst
Weiherfeldsiedlung 16–18
D-63584 Gründau
Fax: +49 60 51 – 92 20-10

55
EN
OPERATING INSTRUCTIONS
Dear customer,
Thank you very much for purchasing a safety storage cabinet from our company, with which you
have made a decisive investment in the safety within your company.
Our safety storage cabinets make the storage of hazardous materials at the workplace safe and
convenient for you.
Please read these operating instructions very carefully. Get to know the advantages and simple
operability of our safety storage cabinets in detail.
This simplifies the daily handling of hazardous materials for you.
Many thanks.
Your asecos team
TABLE OF CONTENTS
1. NOTES • GUIDELINES • GUARANTEE ............................................. 6
1.1. General safety notes ............................................... 6
1.2. Guarantee ........................................................ 6
1.3. Cabinet details .................................................... 6
2. TRANSPORT ................................................................. 7
3. ERECTION • COMMISSIONING • FUNCTION ....................................... 8
3.1. Alignment of the cabinets ........................................... 8
3.2. Commissioning ................................................... 10
3.3. Anti-tilt device ................................................... 10
4. CLOSING MECHANISMS ...................................................... 10
4.1. Types of closing .................................................. 10
4.2. Automatic door closing system: TSA ...................................11
4.3. Locking ......................................................... 12
5. INTERIOR FITTINGS: SLINE • QLINE • KLINE • XLLINE • UBLINE ................... 13
5.1. Spill containment sump ............................................ 13
5.2. Drawers, second storage level ....................................... 13
5.3. tray shelves (height-adjustable) ..................................... 14
5.4. Shelves (height-adjustable) ......................................... 14
6. INTERIOR FITTINGS: GCLASSIC30 • GULTIMATE90 .............................. 14
6.1. Mounting rails .................................................... 14
6.2. Cylinder retainer ................................................. 14
6.3. Rolling ramp ..................................................... 15
6.4. Pipe / cable leadthrough ........................................... 15
6.5. Ermeto screw connection .......................................... 15
6.6. Optional equipment: G-CLASSIC-30 • G-ULTIMATE-90 ................... 16
7. STORAGE .................................................................. 16
8. EARTHING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
9. VENTILATION ............................................................... 17
9.1. General facts .................................................... 17
9.2. S-LINE • Q-LINE • K-LINE • XL-LINE • UB-LINE ........................... 17
9.3. G-CLASSIC-30 • G-ULTIMATE-90 ..................................... 18
9.4. Montage of Fire protection sleeve .................................... 18
10. FIRE • DISPOSAL ............................................................ 18
10.1. Opening the cabinet after the fire .................................... 18
10.2. Disposal ........................................................ 19
11. SAFETY CHECKS ............................................................. 19

66
1. NOTES • GUIDELINES • GUARANTEE
1.1. GENERAL SAFETY NOTES
• Observe applicable statutes and regulations, and the notes in these operating instructions, when
handling hazardous materials.
• Work on the electrical system is to be carried out only with the power turned o and only by
qualified electricians – refer here to the regulations of the local electricity supply company.
• The on-site installation conditions are to be observed (e.g. bolting the cabinets to the building).
• The instructions of the supervisory engineering department must be followed.
• Observe accident prevention regulations and workplace ordinance.
• Ensure that the necessary safety checks are only carried out by authorised sta using original spare
parts.
• Only use the cabinet after having been properly instructed; access is to be forbidden to
unauthorised persons.
• The pivoting area of the doors is to be kept free at all times; doors/drawers are to be kept closed.
• By assigning trained/authorised technical personnel you can prevent the malfunctions, damage
and corrosion damage that result from inappropriate transport.
• Observe the upper limits for stored quantities, loading etc.
• Containers with a volume larger than that of the spill containment sump may not be placed
inside the cabinet; spilt hazardous materials are to be collected immediately and removed.
• Vessels containing aggressive chemicals (acids/alkalis) are to be kept in special cabinets for acids and
alkalis or on shelves for acids and alkalis as well as in cabinets with metal-free interior equipment.
• Sucient technical ventilation must be ensured , pay attention to the notices on connection to
an extraction system under point 9.1!
• Before storing such materials, check that the cabinet's surface is resistant to the chemicals.
• The storage of corrosive liquids or gases can aect the function of the shut-o equipment for the
air supply and exhaust.
• Before the initial commissioning, the safety storage cabinet is to be examined by the user for
possible damage. (See point 3.2)
Set-up requirements
0–35 °C
30–70 %
1.2. GUARANTEE
The guarantee for this product is agreed between you (the customer) and your dealer
(the seller). As the manufacturer, asecos guarantees the products listed in the operating instruc-
tions for a period of 24 months from the date of delivery.
All model safety equipment are subject to a compulsory annual inspection by specialised sta
authorised by the manufacturer. Otherwise the customer’s guarantee claim against the
manufacturer expires.
1.3. CABINET DETAILS
A complete overview of the models can be found at the start of the operating instructions.
Cabinet data Logbook (included with the cabinet)
Technical drawing Appenidix 1
Technical data Table in Appendix 2
S-LINE • Q-LINE • UB-LINE • XL-LINE • K-LINE
These models are tested, certified and marked according to requirements of BS EN 14470-1.
They are intended for the storage of combustible liquids in work rooms in accordance with the
valid national regulations.
G-CLASSIC-30 • G-ULTIMATE-90
These models are tested, certified and marked according to requirements of BS EN 14470-2.
They are intended for the storage and emptying of gas cylinders in buildings in accordance with
the valid national regulations.

77
EN
2. TRANSPORT
CAUTION:
Transport the cabinet in an upright position on a pallet truck, tied and secured against slipping, until
the final place of installation is reached.
The transport locks in the door joints may only be removed directly at the place of installation!
Inappropriate transport can lead to concealed damage to the fire protection insulation!
We can only guarantee the necessary quality if the cabinet is transported to the place of its use by our
specially trained sta.
Tilting the cabinet (may only be done without jolts)
Dismantling of the transport packaging
1
= 4× 2
= 8×
3
4
5 6
In-plant transport
• is also possible without transport locks (inserted as standard in the door joints)
1
2
= 4×
3
Titling onto the side wall
• is only possible with the optionally available tilting bracket (order no. HF.V.27665)
1
2 3
GENERAL
QLINE
ATTENTION
Q-LINE type 90,
width 600 mm
The clearance drive-in width
of the base is 520 mm.
Q-LINE type 15/30,
width 560 mm
The clearance drive-in width
of the base is 406 mm.
You must observe this when
selecting a pallet truck!
Appliances with a carrying
width larger than the drive-
in width may not be used.

88
Q-Mover
• Order no. HF.I.23526, available from your authorised dealer
1
2
= 4×
3
4
5
CAUTION:
Written notification
of any damage to
the cabinet must
be given immediatly!
= 8×
3
4
5
6
7
= 5×
CAUTION:
Afterwards, lower the cabinet slowly and
without jolts in order to prevent damage!
Remove the transport locks from the door joints after erection!
3. ERECTION • COMMISSIONING • FUNCTION
3.1. ALIGNMENT OF THE CABINETS
a: upright transport
b: upright transport
through standard doors
(headroom 1986 ± 2mm)
XLLINE
GENERAL

99
EN
CAUTION:
Door elements must not scrape against the fire prevention seals in the fold of the door when opening
and closing! Doors with an automatic closing mechanism must close automatically from every position
and the lock must be able to lock!
The distance between the door and the floor can be reduced to less than 40 mm. The door panels
required for this can be obtained on enquiry from asecos service.
1
1 Unlock the cabinet and open it manually
2 Remove the power cable from the interior
3 Align the cabinet
4 Allow the cabinet to close automatically
4×
2
max. 2× (!)
3
4×
2
max. 2× (!)
3
made of
metal!
SLINE 60/90
KPHOENIX30/90/VOL. 290
KCLASSIC90
XLLINE
GCLASSIC30
GULTIMATE90
SPHOENIX touchless-90
QCLASSIC90
QPEGASUS90
QPHOENIX90
QCLASSIC15/30
with adjusting aids in plinth
Mit Sockel:
UBLINE
KUB90
SPHOENIX30
QCLASSIC15/30 without
adjusting aids
without plinth: UBLINE, KUB90

1010
3.2. COMMISSIONING
• Before putting into operation for the first time, the user must carry out an examination of the
safety storage cabinet for possible damage, such as defective or loose sealing elements, correct
alignment and perfect functioning of the door elements.
• Use the cabinet and accessories only if they are in an orderly condition.
Connection to the power supply
• Accessories: 5 m low-temperature IEC power cable including earthed mains plug
3.3. ANTITILT DEVICE
xx
CAUTION:
If these model groups are equipped with drawers, they must be fastened to the wall using the
anti-tilt device supplied.
Anti-tilt bracket (EP.ML.6323:
Optional to prevent tilting with maximum load and fully extended drawers
4. CLOSING MECHANISMS
4.1. TYPES OF CLOSING
1 Thermal release: in the case of fire the doors close automatically (even if latched)
2 Automatic door closing system TSA 3 Doors permanently self-closing
4 Doors with arrest system 5 Doors closable only by hand
SPHOENIX touchless-90
QCLASSIC15
QCLASSIC30

1111
EN
1234 5
QLINE
QCLASSIC15 / 30 3
QCLASSIC90 3
QPEGASUS90 3333
SLINE
SCLA SSIC15 / 30 / 60 / 90 3 3 optional
SPHOENIX30 3 3 3
SPHOENIX90 3 3 3
SPEGASUS90 / SPHOENIX Vol. 290 3333
SPHOENIX touchless90 3 3 3
KLINE VBF
compartement
acid/base
compartement
VBF
compartement
acid/base
compartement
VBF
compartement
acid/base
compartement
VBF
compartement
acid/base
compartement
VBF
compartement
acid/base
compartement
KPHOENIX30 3 3 3 3
KCL ASSIC90 33 3333
KPHOENIX90
K90.196.120060.MVMH.FDAS
3
3 3
3
3 3
3
3 3
3
KPHOENIX Vol. 290 3333 3
KUB90 3 3
UBLINE
UB30.060.110.2TAS 3 3
ALL MODELS 3
XLLINE
ALL MODELS 3 3 3
GLINE
GCL ASSIC30 / GULTIMATE90 3
Q-CLASSIC-15/-30/-90 • UB-LINE • K-UB-90 (VBF-compartement):
If the doors not longer latch in any position, then the fusible link of the thermal release has tripped.
The cabinet is to be returned to its delivery condition immediately in order to avoid malfunctions.
4.2. AUTOMATIC DOOR CLOSING SYSTEM: TSA
CAUTION:
The doors close automatically. The time interval until the doors close can be set individually by means
of a jumper (preset: 60 seconds).
Do not push the doors to close by hand, since this can lead to damage to the mechanism!
Sequence

1212
Battery replacement
3
=4×
4
=4×
5
=4×
6
Changing the closing times with the aid of the jumper
1: 15 sec
2: 60 sec
3: 4.5 min
3
CAUTION:
The electrical cable on the housing may not come into contact with the locking linkage of the cabinet!
Closing process
Entering the sensor range during the closing movement
CAUTION:
The closing of the doors takes place purely mechanically and only with the very low forces of the
closing spring. Reaching inside the cabinet during the closing process is therefore harmless and the
risk of injury is ruled out.
4.3. LOCKING
CAUTION:
Applicable for all models: The owner/user must ensure that all doors and drawers are kept closed
whenever the contents of the cabinet are not being accessed! In general it must be noted that the
cabinets do not possess an emergency unlocking facility. This means that persons trapped inside the
cabinet cannot free themselves!
SPHOENIX touchless90

1313
EN
SAFETY CYLINDER CYLINDER LOCK suitable for master key systems)
with locking status indicator with locking status indicator
QLINE QCL ASSIC15/30 QCLASSIC90
QPEGASUS90
SLINE SCL ASSIC15/30
SPHOENIX30
SCLA SSIC60/90
SPEGASUS90
SPHOENIX90/Vol. 290/touchless90
KLINE KPHOENIX30
K-PHOENIX-90 (acid/base-comp.):
K90.196.120.MF.F WAS
K90.196.120.MC.FWAS
KPHOENIX Vol. 290 a/b-comp.
KUB90 KCL ASSIC90
K-PHOENIX-90 :
K90.196.120.MV.FDAS
K90.196.060.MH.FDAS
K90.196.120.MF.F WAS (Fire-comp.)
K90.196.120.MC.FWAS (Fire-comp.)
KPHOENIX Vol. 290 Fire-comp.
UBLINE ALL MODELS
XLLINE XLCL ASSIC90
GLINE GCLA SSIC30 • GULTIMATE90
5. INTERIOR FITTINGS: SLINE • QLINE • KLINE • XLLINE • UBLINE
CAUTION:
Loose parts (e.g. insertable sumps) must always be fully installed/inserted in order to ensure secure
closing of the cabinet doors in case of fire.
5.1. SPILL CONTAINMENT SUMP
1 2
According to EN 14470-1: A spill containment sump must be
installed below the lowest storage level. The spill containment sump
must be able to hold a minimum volume of 10 % of all the contai-
ners stored in the cabinet 1 or at least 110 % of the volume of the
largest single container 2, whichever of these volumes is larger.
Use as a storage surface in case of cabinets with several storage levels:
CAUTION:
Use as a storage surface is possible only in
conjunction with a perforated metal plate insert
Leaks:
• Liquid in the sump is to be collected using suitable means.
• The choice of means is your own responsibility.
1
2
3
5.2. DRAWERS, SECOND STORAGE LEVEL
• All drawers have been designed in such a way that they are permanently drawn in the cabinet or
automatically drawn into the cabinet in the case of fire, making it possible to close the cabinet doors.
CAUTION:
The height of the drawers in safety storage cabinets may be adjusted only by authorised asecos
employees, since the safe retraction of the drawers in case of fire must be guaranteed!

1414
5.3. TRAY SHELVES HEIGHTADJUSTABLE
4
5
5.4. SHELVES HEIGHTADJUSTABLE
6. INTERIOR FITTINGS: GCLASSIC30 • GULTIMATE90
6.1. MOUNTING RAILS
• for fittings for pressurised gases, height-adjustable
6.2. CYLINDER RETAINER
a permanently mounted on
the rear wall
b tension belts for securing
the gas cylinders
c adjustable in depth
(G-ULTIMATE-90)
Adjustable in depth with G-ULTIMATE-90
1
2
3
A B
A GULTIMATE90
B GCLASSIC30

1515
EN
6.3. ROLLING RAMP
• latches automatically in the folded condition
2
6.4. PIPE / CABLE LEADTHROUGH
• prepared on top section
The pipe/cable can now be
fed in without further insulati-
on measures.
CAUTION:
The max. permissible lead-through diameters in accordance with BS EN 14470-2 (10 mm for pipes,
20 mm for cables) are to be observed!
All unused holes in the cabinet wall must be properly sealed with suitable fire protection putty (ROKU
1000, order no. 6520) over the full area and the complete wall thickness.
It is recommendable to manufacture the pipes from rustproof stainless steel or a material with similar
conductive properties in order to maintain the fire resistance characteristics established and specified
during the test.
6.5. ERMETO SCREW CONNECTION
• prepared on top section
• Thanks to the R3/8” internal threads a conventional ermeto screw connection can be mounted
in the second step.
STANDARD
COMFORT

1616
6.6. OPTIONAL EQUIPMENT: GCLASSIC30 • GULTIMATE90
• is hooked into a mounting rail and is adjustable in height
• is adjustable in height and bolted to the side wall
= 4 mm
= 20 mm
7. STORAGE
• Vessels containing aggressive chemicals (acids and alkalis) are to be kept in special cabinets
for acids and alkalis or on shelves for acids and alkalis as well as in safety storage cabinets with
metal-free interior equipment.
• The storage of corrosive liquids can aect the function of the shut-o equipment for the air
supply and exhaust.
• Each container placed inside reduces the minimum containment volume demanded in section
5.1. in relation to the total stored quantity.
• The total volume of the stored gas cylinders must not exceed 210 l + 10 l (purging gas cylinder).
Applicable for all models:
Depending on the type class of the cabinet, observe the respective valid national regulations!
8. EARTHING
An earth connection may be necessary, depending on the customer-specific use of
the safety storage cabinet. The decision regarding this is taken on the basis of a risk
analysis by the customer.
SIDE CYLINDER RETAINER
(adjustable without tools)
SIDE CYLINDER RETAINER
(bolted)
SLINE
QLINE
KLINE
XLLINE
UBLINE
GCLASSIC30
GULTIMATE90
OVERVIEW

1717
EN
1 Rear section: UB-LINE | K-UB-90
2 Rear section: XL-LINE
3 Top section: Q-LINE
4 Top section: S-LINE 15/30 Minuten | K-LINE
5 Top section: S-LINE 60/90 Minuten | K-LINE
6 Top section: G-CLASSIC-30 | G-ULTIMATE-90
The spare parts required for the connection are
not part of the scope of supply.
Earthing when decanting:
Connection to a potential equalisation system is compulsory in this case.
Cabinets in which decanting can be performed should additionally be equipped with an earth terminal
in the interior (at a surcharge on enquiry) which must be connected to the decanting containers. This
is standard with cabinets from the UB-LINE with drawers.
9. VENTILATION
9.1. GENERAL FACTS
NOTICES
The fire protection valves near the supply and extraction air connections are safety
and maintenance-relevant components.
In order to check the correct operation or to replace a defective element, please ensure
that flexible connecting hoses or sliding pieces are used to connect to an extraction
system in order to ensure simple dismounting and re-mounting of the extraction air
connection.
• If installed on an exhaust system, a check must be carried out to ensure proper connection to
the system (e.g. using a smoke tube)
Ventilation wheel for technical ventilation
• The ventilation wheel serves as an indicator for correct ventilation.
• If the wheel turns, the necessary 10-fold air recirculation rate is
exceeded.
DN
75
<01/2014
UBLINE
KUB90
DN 75
>01/2014
UBLINE
KUB90
DN 50
QCLASSIC90
QPEGASUS90
SLINE
QLINE
KLINE
XLLINE
GLINE

1818
9.2. SLINE • QLINE • KLINE • XLLINE • UBLINE
• All models can be connected to a technical exhaust system via the exhaust connector. Please see
the respectively applicable national regulations for the specified air recirculation rate, maximum
pressure losses and exhaust air ducts.
CAUTION:
In general these models can be operated without technical ventilation. The direct environment of the
cabinet can be an explosive zone in this case. If the cabinet is to be operated without an exhaust con-
nection, the user must attach a marking to it. With some models the supply and exhaust connectors
are not pre-mounted. They are included with the cabinet and must be screwed to the openings on the
top section.
9.3. GCLASSIC30 • GULTIMATE90
CAUTION:
In the case of gas cylinder cabinets that are connected to a technical exhaust system, the minimum air
recirculation rate must be fulfilled according to BS EN 14470-2.
The ventilation must be permanent in operation and must lead out to a safe place in the open air.
The pressure drop of the cabinet must not exceed 150 Pa. The inflow velocity of the air must
be at least 20 cm/s.
Minimum air recirculation rate during storage of:
combustible/oxidising gases toxic gases
9.4. MONTAGE OF FIRE PROTECTION SLEEVE
4×
(4×30 mm)
4×
(5×25 mm)
4×
(5×25 mm)
10. FIRE • DISPOSAL
10.1. OPENING THE CABINET AFTER THE FIRE
UBLINE
KUB90
ABLUFT a
ZULUFT b:
Schrank mit Sockel
Schrank ohne Sockel
2
3
FOR MODELS:
G90.205.140
G90.205.120
G30.205.140
G30.205.120

1919
EN
CAUTION:
Depending upon the duration of the fire an ignitable vapour/air mixture may have formed; therefore
remove all sources of ignition within a 10 metre radius of the cabinet before opening it.
¡ use only spark-free tools
¡ open the cabinets with extreme caution
10.2. DISPOSAL
The models can be disposed of once they have
been dismantled and the materials sorted. They
are free from materials that have to be dispo-
sed of as special waste.
11. SAFETY CHECKS
As safety equipment the cabinets have to be checked for safety at least once per year.
The next checking date can be taken from the check sticker on the outside of the door. This annual
check can be carried out with the necessary care, and for securing your warranty claims in the case
of fire, only by an authorised asecos employee (refer also to our service brochure regarding this).
In addition, we recommend that you carry out a daily and monthly functional check:
Daily functional check
• applies to the spill containment sumps (collect and remove any leakages)
monthly functional check
• perfect function of the doors:
- hinges
- locking system
- door closer
- door open arrest system
• correct seating and condition of the fire protection seals
In case of damage please contact your dealer in order to have the cabinet repaired using original
spare parts. The cabinets can be cleaned with a mild household cleaner and a soft cloth.
CONTACT:
In the case of defects or complaints about our products (within and also after the
warranty period), and for requesting safety checks or taking out a service contract,
please contact our service hotline on:
Tel: [phone] [email protected]

2020